What are the ways in which RFID manages its asset inventory? Technical route resolution
Industry News

What are the ways in which RFID manages its asset inventory? Technical route resolution

PublishedShanghai Zejie Smart Technology Co., Ltd.

The core of the RFID asset count is to turn "manual checkbooks for things" into "cleaning up auto-out reports." There are four common routes: handheld terminals, fixed channels, mobile inventory vehicles, smart shelf cabinets. Which depends on asset density, flow frequency and budget: the more assets are denser, the more they move, the more they tend to move in a fixed or moving way; and, conversely, the minimum cost of handheld terminals is almost sufficient.

Cost dimension

The inputs varied widely among the four categories of programmes, with clear accounting before a route was chosen.

Handheld TerminalAn industrial-grade UHF (superhigh frequency, working at 860-960 MHz) hand-held readers with market prices of roughly 2000-8000 dollars; a non-source label of several cents to a few dollars per, a medium-sized enterprise starting with inputs that can be within five digits. It is suitable for a limited number of fixed assets, distributed by a team of starters or functional units.

Fixed access/door-banis the option with the highest investment per point. A standard three-lane inventory portal with antennas and controllers typically costs RMB 10,000–50,000. The antenna array, shielding, and control software drive the price, not the reader itself. Site modifications are also expensive. Doorways must be adapted, cables routed, and shielding installed properly, or the false read rate will rise sharply.

Mobile Cartr.It's the middle route. It has a flexible and fixed combination of hand-held, one-desk costs between $3 to 100,000, for a transition period in larger warehouses that do not want to be retrofitted, or for a long variety of items, with a full range of spare parts.

Smart racks/coolsThe highest unit price ranges from several thousand to tens of thousands, but is set on a line-by-line basis and suitable for the return of valuable small pieces and high frequency loan scenarios such as instrument meters, tools, medical consumables, sample tests, etc.

Inventory efficiency and accuracy

Efficiency differences are derived mainly from two parameters: distance and mass literacy.

Handheld terminals are read within 30 cm-2 m and a single person takes an inventory of 50-200 items of assets in one room at a time, which takes about 10-30 minutes; the efficiency bottlenecks are moving at a manual speed.

The problem is that, by reading dozens to hundreds of labels at a time, the fixed channel can be counted in seconds, and the accuracy rate is more than 99% if the environment is clean. The problem is "the moment passes through those seconds" -- nobody walks through the door without data, assets are not in sight if they are moved out of the corridor.

A mobile inventory cart can count several thousand to tens of thousands of assets in one pass through a large warehouse, typically in a matter of hours. It sweeps shelving aisles for complete coverage without gaps. At Shanghai Zejie Technology, we've tested this on several spare-parts warehouse projects. At a roughly 10,000 m² warehouse, the cart typically finishes in under two hours, compared with two to three days for a manual count.

The smart cabinet is the most real-time asset when labeled, and each entry and exit cabinet is automatically recorded without a special count action and with the highest accuracy provided that all accesses are through the door and no one takes them off to put them back.

Applications

The route is actually a match to the scene characteristics, which are more intuitive by these contrasts:

The logic of being a quick-on-the-side is "hardware first" -- and it's more steady -- looking at asset types and flow patterns, then deciding the hardware route. It's also in the medical industry, the breathing machines in the ward, the monitor that fits hand; high value items in the fuel range fit smart cabinets; and the big devices in the central storeroom match mobile car combinations with fixed channels.

Common pits.

Several pits most affect the up-line effects, and avoid them in half of the project.

Metal and liquid interference.Metal surfaces reflect-frequency signals and liquids absorb, so metal cabinets, liquid medicines, battery types require special anti-metal labels or soft labels that cannot be used with a general label, otherwise the reading distance will be reduced to a few centimetres.

tab frequency selection error.UHF, HF (HF, 13.56 MHz), NFC is not the same. Most asset counts are done using UHF remote passive tags; door-barrel cards, identification with HF; and a mobile phone is used by NFC. The combination will be "not read" or "less read."

The fixed channel is installed in an incorrect location.The corridor is a public channel, where the label reads unrelated assets; it is right to place the warehouse door closed and only to read the assets in or out of the warehouse.

Software docking is not planned.RFID is a collection layer, the ultimate objective being to connect with ERP, asset management systems. If the inventory results are not exported, they are manually re-logged back to the starting point. It is recommended that you align the interface protocol with the software side (often WebService or ResTful API), data fields and the inventory trigger logic before selecting hardware.

The route is not absolutely good or bad, but matching the scene characteristics is key. First, you clear up the asset type, the flow frequency, the re-budget, then back to cost, efficiency, the scene, and the four dimensions of pit avoidance, most projects can choose the right option. If the project is complex, involving multiple types of asset mixers, two combinations of routes -- like a fixed pipe door, mobile garage -- can take advantage of each other.