What about asset positioning management?
Choose which sort of positioning technique to answer three questions first.
Asset positioning management is not free of a choice: RFID (radio frequency recognition, read labels by electromagnetic wave), BLE (blue teeth low-energy, gateway or mobile phone scan), UWB (superbroadband, nanosecond pulse ranging) or GPS/Beidou (satellite positioning), which are the same areas as the main routes. The cost of wrong technology is not small -- it is not enough to get back to work, the label is too expensive to open and batteries need to be re-carried in the change season. Before choosing, three questions are asked: Are assets mainly indoor or outdoor? Need for precision at the level of a metre or submite (less than 1 m)? Do you have dozens of or thousands of items of one-size assets? The technical route is more or less clear when three questions are answered.
Cost dimensions: labels, gateways, long-term dimensions
The cost cannot be measured in unit prices alone, but in three segments.
label cost.Passive RFID tags, which have no battery and draw power from the reader, can cost just a few tenths of a yuan and suit one-time use on inexpensive consumables or packaging. Active BLE tags, which transmit using a battery, typically cost from just over CNY 10 to several dozen yuan. UWB tags generally cost tens to over a hundred yuan because of chip and RF design constraints. GPS/BeiDou terminal modules usually cost more because they must receive satellite signals and send positions to a server through a 4G or 5G cellular connection.
Infrastructure costs.RFID needs to deploy readers (also called reading and writing, base stations), BLE requires bluetooth gateways or positioning anchors (fixed, reference points for label positions), UWB needs position-based stations - typically placed at 1-4 per 100-300 square metres. The outdoor scene is relatively low in infrastructure, mainly satellite-based.
Transport costs.BLE label batteries usually use 1-3 years, UWB labels vary considerably depending on the launch power and frequency, HF positioning takes six months to replace, and RFID is largely not maintained. When you plan for a large equipment leaser, Shanghai has found that the labour cost of changing label batteries can account for more than one third of the overall project budget for two years, so it is important to convert the replacement frequency into the total cost of selecting.
Effect dimension: accuracy, resistance to interference, continuation
The accuracy figures appear to be small and the actual use experience may vary from one day to another.
Position precision.RFID can tell you that "in an area" the range of areas depends on the power of the reader antenna (part of launch and reception of radio frequency signals), usually between 1-10 metres, which is more appropriate for "in/out" rather than precise positioning; BLE can be 3-5 meters in an open environment, with greater volatility after multiple-range effects (signs through walls, multiple reflectors of shelf); UWB, with nanosecond pulses, typically 10-30 centimetres, is the highest of current consumer technology; GPS/Beads are within space 3-10 metres, and their accuracy enters indoors or is hidden, rapidly declining or even missing.
Interference resistance.Metals and water are the natural enemies of RFID, and RFID reading rates in large mechanical workshops will decline significantly; BLE works in 2.4GHz band (microwave oven, Wi-Fi also uses this frequency) with a high source of interference but also high maturity; UWB pulses are extremely narrow, multi-track resistance is strong and more stable in complex industrial environments.
Resuscitation and real-time.For real-time tracking at one update per second or faster, both BLE and UWB consume considerably more battery power. RFID reads happen almost instantly and have virtually no battery runtime concerns. If you only count on a schedule, once a day or once a week, a BLE tag battery can last more than three years.
Applicable dimension: seating by industry and asset type
The need for positioning varies widely among industries, and replicating others ' programmes is easy to step on.
Storage logistics.The warehouse is heavily slabed, with narrow access, and it's common practice for RFID to make bulk counts in and out of the warehouse, BLE to be co-located with assets, UWB to be used only partially on high-value small items. A third-party warehousing client would have wanted to store a full-scale UWB, and we suggested piloting the valuable small area, running six months of data before deciding whether to expand, but the overall budget fell.
Construction and rental of equipment.The tower hanger, the diger, the template, the scaffolding, which often flows between different sites, GPS/Beidout-Dumping Shell positioning terminals are the mainstream program, and a fine inside location with UWB can balance "where" with "where" with "where in the room."
Hospitals, laboratories, special places of custody.The centimetre-level accuracy of UWB management for high-value medical equipment or critical personnel is almost immediately required, but deployment costs are also highest and usually cover priority areas rather than the entire building.
Manufacturing line.The fusion kit (specialized tools for stationary work in production), the flow management of knives, and the moulds, with BLE labels plus gateways having a higher combined value, can be directly linked to the production rhythms of MES.
Common pits: signal, co-eming, integration
The process of technical selection is only the first step, with several high-frequency pits being used during the deployment phase.
Signals are blocking.Metal shelves, equipment casings are decaying or reflecting wireless signals. RFID is particularly sensitive, and BLE is relatively better but not fully immune. Pre-deployment surveys must be done on site, using empirical data rather than the cover map in the manufacturer’s manual to plan anchor position.
Multiple labels and clashes.When hundreds of labels are in the warehouse, RFID reads "missing" (multiple labels respond to each other ' s signals flood), and BLE broadcasts also have a channel congestion. The general practice is to read on a split basis or to use impact-proof algorithms (to place labels in an orderly queue, avoiding simultaneous sound).
System integration.The location data are ultimately integrated into the ERP (Enterprise Resource Plan), WMS (Stories Management System) or the Asset Management System. Many manufacturers only provide positioning SDK and data interfaces, but actual time fields are defined, frequency is updated, and rights control is inconsistent. The selection phase is then matched with the IT team to regulate the interface, avoiding a second delay in development.
Data security and privacy.The location data relate to asset distribution and movement, storage and transmission being encrypted. If you leak, it is the same as making the home open.
Proposal for action: pilot first, using data
Asset positioning management is not a one-time project, more like an ongoing iterative process. We've seen too many projects come up and go for "full coverage, centimetres, full real time", and budget overruns, discounts, team fatigue. The more conservative rhythm is: select the most visible scenes of 1-2 pain points first to pilot, run 3-6 months, based on asset recovery rates, take stock efficiency, and the AC accuracy index determine whether or not to expand technical coverage and areas. The pilot phase is manageable, its effects can be quantified, and no re-entry needs to be reversed at the end of the period.

Ms. Lei
Mr. Pang