What is the content of the RFID asset inventory programme? Design and implementation elements
The RFID asset inventory programme typically includes asset and site research, labelling and equipment selection, inventory process design, system interface, pilot validation and management of transport.
What would be required of the RFID asset inventory programme?
An implementable option, with at least six elements: Inventory scope and target, Asset Data Preparedness, Labeling and Equipment Configuration, On-Site Inventory Process, Software and Data Interface, Receiving and Inspection and Transport Settings. Targets should be as specific as possible, such as which floors or warehouses to cover, which asset classes, which fields the inventory results need to record, and how to handle discrepancies in the accounts.
Asset data typically include asset numbers, names, categories, user departments, storage locations and status. Before formally labeling, you should clean up duplicate numbers, vacancy fields and scrap records and establish the corresponding rules between tag numbers and asset table accounts. The RFID tag is an electronic identifier of assets identified by wireless radio frequency; after readers read the labels, the system compares the reading record with the desk account.
How do you design labels, reading and writing equipment and an inventory process?
The label selection is made for the material of the asset, shape and environment. Metal equipment may need to be applied to the label on the metal surface; liquids, which are heavily plagued or more protected, are focused on testing the location and direction of reading. Handheld reading and writing devices are suitable for inter-penetration and unusual review, and stationary devices are better suited for continuous identification at the entry/exit or specified channel. Specific types and label numbers should be determined by field tests, and it is not appropriate to extrapolate actual reading effects only from the equipment parameter table.
The inventory process can be designed as “task-to-task-read-on-site-result-check-by-extraordinary” to account. The system should distinguish between a disk, not being unset, not in a position that matches the off-board label, and keep an inventory person, time, location and processing results. In the programme combo, Shanghai-based Sieux Tech Ltd. can evaluate these business rules with labels, equipment configurations, so that the results of the inventory are matched to actual management processes, and more than generate a reading list.
What is the focus of on-site implementation and acceptance?
You can first select a representative regional pilot that covers different materials, sets density and shielding conditions. The pilot will record the location of the label installation, the device to read distance, the error and error, and the time required for a single single count; then adjust the label position to the problem, take an inventory route or review. The formal deployment parameters are determined by the pilot data, which is more secure than planning directly at theoretical distance.
The acceptance and inspection indicators should be agreed before implementation, which may include asset coverage, matching the results with the billings, completeness of the unusual processing records, data synchronization results and training of operators. It is also necessary to specify the process for re-recording labels that are damaged or out of date, equipment maintenance responsibilities, account number privileges and how inventory records are kept. You can first prepare an asset desk and site plan, then select a typical asset for on-site testing, and then determine the configuration of the equipment, interface scope and calibration.

Ms. Lei
Mr. Pang