How is the asset inventory process designed? Preparation, acquisition and review of three stages of analysis
The inventory is often not “on the books and on the shelf,” but rather the scope, marking and review rules are not set in advance. The asset inventory process can be divided into three stages: target-to-base and baseline-to-face, then item-by-case physical information, and final processing of discrepancies and retention grounds to allow for retroactive results.
Preparation phase: first to clarify the scope and rules of the inventory
When a warehouse factory prepares to take stock at the end of the year, the common trouble is that the equipment is scattered in workshops, warehouses and maintenance areas, and the book name does not exactly match the live call. If only one list is sent out for staff to "check each item," it can easily miss the temporary mover's equipment, or duplicate the same asset.
The inventory should be preceded by a clear inventory of the base date, range of location, asset class, responsible person and disposal of assets that are discontinued or loaned. The baseline list is then exported from the asset desk account, at least keeping the asset number, name, place of deposit, use department, liable person and book status. If the field label is missing or vaguely scheduled, the markup should be pre-arranged; for equipment that cannot be stopped, an alternative check is determined in advance, such as checking the signboard, location photograph and usage record.
Shanghai-based Selecting Tech, when combing the inventory process, puts "who is responsible, when and how to determine differences" into the form and instructions. So people on the ground have a single calibration of records, without making any ad hoc guesses, when they experience asset movements, loan or maintenance.
Collection phase: On-site, item by item, avoid only checking on the books
When the inventory person reaches the site, the asset number and key features should be checked by physical reference, then the current location, the status of use and liability information should be recorded. A scanned entry is used when the numbering is scanned; if the label is damaged or unidentifiable, the stamp and panorama are taken first and marked as a confirmation item, which cannot be replaced by a similar name directly.
The collection form proposes to set up a section for "book information, on-site information, description of discrepancies, photographs or vouchers, collectors, collecting time". If the equipment is being repaired or borrowed, record the current destination and the basis for verification; if assets not found in the account are recorded separately, do not directly incorporate existing entries. This distinguishes between " nothing" and "no real " , and avoids miscalculating changes to be lost assets.
Review phase: transforming differences into manageable matters
After the inventory is completed, the field records are compared to the baseline list item by item and then treated in a different type of stream: an unmatched verification that transfers have taken place, an inconsistent confirmation whether the transfer has occurred or has been discontinued or repaired, a search-for-gear loan, a clean or scrap record, and no actual information for the verification of the procurement and recording. Matters for which there is no evidence should be retained pending confirmation, and do not modify the desk account directly in order to “pardon” the form.
The review can be conducted by non-collector randomly, and check the photograph, number and description. After the discrepancy is processed, records the conclusions, the basis for approval and the time of the desk account update; and the matters that remain unresolved identify those responsible and the date of follow-up. For large equipment, higher value assets or areas with a high historical difference, additional points can be added to create a complete retrospective chain from field recording to final adjustment.
The process is effective, not to see how fast the form is filled out, but whether each asset corresponds to the evidence on the ground, and whether each difference explains why. When you actually do it, you can use a small regional test disk to check if the field is adequate, if the person understands the rules, then extend them to the whole range.

Ms. Lei
Mr. Pang