How to choose an asset management solution for RFID? Key elements assessment
RFID Knowledge

How to choose an asset management solution for RFID? Key elements assessment

PublishedShanghai Zejie Smart Technology Co., Ltd.

The choice of RFID asset management program, not the core, is not branding, price-setting, but the identification accuracy rate, label costs, deployment environment, and data is clear about the four things. A set of programs can be validated in these four dimensions, basically on the ground; on the contrary, a thick programbook is just talk. These are the assessment points that we have been repeatedly validating for information over the years when we did the RFID project.

Let's get this straight. Don't let the technology take you away.

RFID is not a panacea. It's the best thing to do.Large, frequent flow, non-contact batch identification requiredAssets, such as tools, archives, trays, spare parts, uniforms. The determination of whether to go on RFID is to answer three questions: whether assets need a lot of inventory, whether they move frequently, and the cost of missing or misplaced is not too high. Three out of three answers are "Yes," and RFID is worth putting in.

And, in turn, if the assets remain intact for a long time, and there are only dozens of them, and the manual billboard or bar code is enough, not to go on RFID. We've seen clients spend hundreds of thousands of hours on the system, and we find that they count twice a year, and then hand-written forms can be done, and it's embarrassing.

Label selection: the most easily underestimated cost head

Many projects overbudget, the problem is labels.UHF, typically at 3-8 metres, the directed antenna can be further with a specific label and can read hundreds of labels in bulk at a time, one order of magnitude more efficient than barcodes.

The selected label cannot read only unit prices, but depends on four parameters:

We have learned from a cabinet asset project of an electric client: the use of generic non-dry glue labels to save costs, with over 40 per cent of missing reading on the cabinet, and finally, full return to work for metal-resistant tags, and double the cost of materials and delays in construction.

reader and antenna: must perform live signal testing

The deployment of Reader and Antenna directly determines the effects of recognition, which are common in four ways:

Lab specifications differ substantially from field performance. Metal shelves reflect signals, liquids (particularly water) absorb UHF signals, and multiple readers operating in the same band can interfere with one another. All of this must be tested at the customer's siteSmall-scale pilotis the only way to know for sure. Before installation, we spend one to two weeks measuring signal strength and missed reads at actual locations. We finalize antenna count, placement, angle, and power before installing them at scale. Seven out of ten projects that skip this step need rework.

Intermediate docking with data: a true watershed of project success or failure

RFID reader producedOriginal frequency data, containing a large amount of information that repeats, misreads, signals colliding and must passMiddle (Middleware)To be weighed, filtered and connected, it becomes a valid event in the asset desk account and is then written into an ERP, MES or fixed asset system.

The assessment centered on four things:

Many projects are stuck at the last step, with a front-end recognition rate of 99 per cent and a backstage — the problem is that the middle is not solid.

How to screen suppliers: four firm criteria

The selection of suppliers should not be limited to the brochure, but to four dimensions:

  1. Industry experience: Several projects (electricity, manufacturing, warehousing, medical, archives, etc.) similar to your scenes, preferably with a case of end-of-field co-operation
  2. On-site implementation capacity: Is there a construction team, a signal test device and can you pilot it in the real environment?
  3. After sale and supply of consumables: labels are a waste material, and long-term supply capacity over 5-10 years is more important than single quotations
  4. System Open: Hardware is locked, can third-party tags and readers be compatible, data interfaces are fully open

The issue Shanghai Zejie Technology Co., Ltd. encounters most often in RFID asset projects is not a technical limitation but poorly defined customer requirements. Before each project, we spend one to two weeks on site mapping asset types, movement paths, count frequency, system integrations, and exception handling before drawing up a plan. It looks slow upfront but is key to reducing rework later.

Cost structure and common error zones

A complete RFID asset management system with a budget structure broadly:Tags: 40%-60%; readers and antennas: 15%-25%; middleware and software: 15%-25%; installation and after-sales service: 10%-15%And many people think software is big, and labels are the big one.

Another common error is to pursue 100% recognition. In real-world environments, read it one time.Over 99 per centIt has been excellent, with emphasis on filling individual gaps by multiple readings, redundant designs and alerting to back-up, rather than re-engineered hardware to 100 per cent hard.

Standard action for selecting a scheme

The RFID asset management program is not "best" but it has standard moves:

  1. First, we have to clear the asset type, flow method, count frequency, target system.
  2. Small-scale signal tests in real environments, speaking with a measured drop rate instead of a parameter table
  3. Dissociate labels, readers, intermediates, docking costs, not just the total price
  4. Confirm the speed of post-sale response and the long-term supply capacity of the materials
  5. The contract contains clear identification rate indicators, acceptance criteria, quality assurance period

Completing these five steps should weed out about 80% of unsuitable options. Of the remaining suppliers within budget, choose the one with the most consistent field results and reliable after-sales support.