How does the RFID asset management work?
RFID Knowledge

How does the RFID asset management work?

PublishedShanghai Zejie Smart Technology Co., Ltd.

A lot of people think it's easy to manage RFID.

And when people listen to RFID asset management, the first reaction is to buy labels, load readers, and then go to software. But when they do, they find that labels are read, not right in the software; they count fast, business processes don't really run. The problem is often not that one single point is not done, but the sensory and operational layers are not designed from the beginning. The sensory layer solves "can data be captured," the business level solves "how data works", and both have to plan simultaneously.

The sensory layer is the "can we get data?"

The sensory layer is the physical chassis of the entire system, consisting of electronic labels, readers, antennas and handheld terminals, which determine the boundaries of data collection - how far, how fast and how accurate it can be read.

Read the label selection first. The most common asset inventory isUnsourced UHF tag, with a read range of 3-10 m. These tags need no battery, cost little, and suit equipment housings, toolboxes, and shelves. Metal can block the signal and liquids can attenuate electromagnetic waves, so these assets often need specially designed on-metal or flexible tags, shortening read range to 1-3 m. Active tags have built-in batteries and can be read from tens of meters away, but their typical life is only three to five years and they cost considerably more. They are mainly used for applications such as large containers and vehicles that need long-range identification.

The location of the readers and antennas is critical. A common error area is that they are placed in the ceiling, which is considered to be the most even. Indeed, the RFID antenna is directed, with a "read" gas cone, usually between 60 and 90 degrees. The shelf is dense, with narrow corridors, and more suitable for placing them on both sides of the channel, rather than at the top. Several readers work together, and they also interfere with each other, and need to stagger their channels or add a syncor.

The business level is about "how to use the data."

The sense layer is only responsible for reading data, and the business level is where it makes value. Many people think that the business layer is a "entry system" -- much more than that.

A complete business layer needs at least three components. First, asset master data: each asset needs a unique ID, usually linked to the RFID EPC, as well as a name, category, location, custodian, purchase date, and depreciation information. Second, traceable workflows for receiving, issuing, transferring, counting, and retiring assets. Third, exception handling: define how detached tags, offline readers, and unauthorized movement are detected, who is notified, and who responds.

The business layer is not isolated, and must be able to connect with existing ERP, the financial system. Assets are added in tandem with the general ledger, assets are written off by triggering a financial write-off, and the results of the inventory are automatically compared to the book. Here is the scale: instead of trying to replace the ERP, the business layer is a conversion layer for RFID data, cleaning raw tag data, connecting to business events, then pushing them to the upstream system through API (application interface, that is, standard channel for cross-movement between systems).

The key to synergy is in data models and event flows.

The senses and the business world are really working together on two things: one.Data ModelandEvent driven midway(i.e., a layer of software for data conversion and distribution between readers and business systems).

Define the data model early. An RFID tag's Electronic Product Code (EPC), effectively its ID number, is typically a numeric string, but business asset IDs may mix letters and numbers. Map the two codes and make the mapping traceable so a replacement tag inherits the asset's full history. The mapping table is itself one of the most important assets at the business layer.

The event stream is another synergetic line. Zreader can generate thousands of original readings per second, many of which are repetitive (the same label was read multiple times) and jamming (the next to the misread). The middle thing is: go heavy, filter, aggregate, and then push a meaningful event -- like "A" out of the warehouse, "A" asset B is detected moving" -- to the business system, where it triggers the corresponding process after the event has been received.

Shanghai-based Selective Technologies, in making asset inventory changes for a manufacturing client, has been working with business to combe five core types of events - the library, the bank, the transfer, the inventory, the end of life, each type of event defined trigger conditions, data fields and downstream movements. The sensory layer is responsible only for collecting raw data, all of which are done in the middle and operational systems. This way, adding new readers or adjusting antenna positions will not affect top levels of operations.

It's a few pits on the ground.

Pipe One: Buy hardware before you think business.Many project tenders are based on a list of hardware only and business process design is put into the implementation phase. The result is that hardware is fully installed to find that certain processes are not suitable for RFID, such as taking photos each case to confirm the appearance.

Pit II: Underestimation of environmental disturbance.The movement of metal shelves, liquid containers, and humans can affect the reading rate. Only 70% after a warehouse project is online, and it's only two weeks before a screen is checked to find a reflection of the metal ventilator in the central warehouse, and then you can pull the readout to over 98% with the inclusion of a shield and adjustments to the antenna angle.

Pipe Three: Ignore label life cycle management.The unsourced label itself has a long life, but the coding and asset binding relationship of printing needs to be maintained for a long time.

Several indicators to determine whether the project is healthy

A stable RFID asset management system can be seen in three numbers:Read accuracy rate(The experience value is usually above 95 per cent, less than 90 per cent of which are essentially unavailable)Increased efficiency of inventory(As a result of the change in manual inventory to automatic inventory, time can usually be reduced by 70 to 90 per cent),The time of discovery to process the anomaly.(Perfectly, minutes rather than grades).

If you are assessing or planning such a project, you're going to have two questions: first, how many of your assets are metal or liquids that require special treatment; and second, whether your existing ERP or financial systems can receive business events through standard API. Think about these two questions, then choose the type of hardware and software, and there will be fewer turns.