How do you choose the RFID asset management solution?
How do you cost it to keep the price off the face?
When it comes to the RFID asset management program, many people ask "How much is a set of things?" But if you look at the price only, then you'll probably get extra input. The cost is two pieces: one-time and continuous.
In one-time inputs, hardware is big -- labels, readers, antennas, gateways/handhelds, which together usually account for 60% of the total budget ~70%. The market price of an unsourced UHF label is more than a few cents to one or two dollars per unit, and anti-metal tags are more expensive, and one is more than a few pieces; the prices and frequency bands of readers and antennas are directly related to power, protection levels. Software, implementation, training is generally 20% ~30%.
The labels are used to keep the input undervalued. The labels are used, especially in the outdoors or industrial sites; there is a loss; the reader antenna needs regular inspections; and software upgrades and interface maintenance are long-term. When we do our client's programme budget, we add three years of tag losses, system transport, possible build-up, so that the master record is right -- many projects are not finished, and it's not clear.
There is also a hidden cost that is often overlooked: the development of interfaces with existing systems such as ERP, WMS, MES. If the selected system data interface is not standardized, the field definition is vague, and each subsequent system is developed separately, this may be more expensive than the software itself.
It's not just about the PPT.
The effect is the most glamorous. The manufacturer gives a very nice list of parameters, but it may not be so at your own site. The evaluation suggests four indicators.
The first one is...Read accuracy rateThe standard target in the industry is over 99%, but this number depends on the field. You don't want laboratory data, you want real data from "the density of your shelf, the metal ratio, the width of your walkways." The schemer store does a live test before signing a contract, and shows you a real sample, not a direct throw-off.
The second one is...Read distance and direction. The UHF label can be used in an open environment for a theory of more than 10 metres, but it is clearly shorter to read distance when placed on the metal cabinet and in a dense shelf. So the parameter "distance" is not theoretical, but field value.
The third one is...Batch Read Speed. The general UHF program can read 200-500 labels per second (source: EPCglobal Class 1 Gen 2 protocol typical), which is sufficient for the warehouse bulk count. This speed may be limited if your assets are positioned in a very dense manner.
And the fourth one is...Environmental resilienceHigh temperature, low temperature, damp, oil pollution, metal surface interference -- these scenarios are completely different labels and type of reader, so that the programmer can say your environmental constraints by article and give a symmetry.
How do you choose the scene?
RFID is not a trick. The next few scenarios are different, so let's get this straight.
Select by frequency
Low frequency (LF, around 125 kHz) reading distance is short and typically a few centimetres, which is more resistant to metallic and liquid interference and suitable for close-range identification of small tools, key components.
HF (HF, 13.56 MHz) reads from 10 cm to 1 m, often on door-barrel and storage labels, in conjunction with handheld reading at close range.
The UHF (UHF, 860-960 MHz) is a long-distance reading distance of up to 3-10 metres and has strong mass readability capabilities, which is the current mainstream programme for asset counts.If you have a high level of asset inventory coverage and mass reading requirements, the UHF is largely preferred.
Select by Label Type
Low price and long life of passive labels, but limited reading distance and metal surface performance.
Anti-metallic labels are specially designed for metal cabinets, metal equipment and are placed to ensure reading at a level higher than the normal label.
Source/semi-source label with a battery, which can read at distances of several tens or even hundreds of metres, but which is expensive and requires a change of battery for valuable assets or wide range tracking.
Selected by deployment density
The reading and writing machines and antennas are not all installed. Warehouses, hallways, room doors, office areas, each area is counted separately. For example, a 2,000-square intensive warehouse may require 6-10 reading and writing points to cover the blind area; if it's an open room, office space, 3-4.
This one better get the programr out first.Overwrite Simulation, reset the device to avoid being unable to read it in the spot corner and then reloading it.
What are the common pits?
Several projects were completed, several pits were repeated and less devious than to say in advance.
Pipe One: The label selection is price only.The normal label is not read in the metal cabinet, but it has to be anti-metallic. The liquid-rich environment also needs a special type. This saves money on a post-problem.
Pipe II: Ignore interfaces and data migration.The data that RFID reads are eventually fed into ERP or self-study systems.
Pipe Three: Covering blind areas is empirically estimated.The deployment of antennas cannot be based on experience alone, but must be based on site surveys or simulations, especially in a shelf-intensive and metal-rich environment.
Pipe Four: Make software a gift.Many programmers pack software in hardware, but you really spend your time with software -- inventory of task streams, unusual alarms, statements, interface with third-party systems. Software is easy to use and expand, and weighting is as high as hardware.
Pipe Five: Ignore long-term effects.Reader antenna failure, label wear and tear, system upgrades, without a continuous service loop, may leave the system unattended after one year.
How did it end up in action?
If you start choosing, we suggest that we go in this order:
- The type of asset, size, frequency of inventory count and target accuracy for which they are responsible should be listed first, preferably in a list of requirements.
- Take this list and let the programmer first take a field look, do a sample test, and give you a real environment for reading data.
- Programmers are required to re-sign the files covering simulation maps, equipment points lists, interface specifications and total cost for three years.
- The contract contains a clear scope of transportation, an upgrade clause and data attribution - this is the case where Shanghai-Shanghai technology falls into the terms of the contract when the project is delivered, without oral commitments.
- Small-scale piloting, running processes and full-scale spread.
Select the RFID asset management program, which essentially involves business scenarios, technical parameters, total cost of holding the three things. Do not be carried by a single indicator -- price, function, and parameter sheet -- that takes an extra week to test on the field, much more than a month to fill a hole after signing it.

Ms. Lei
Mr. Pang