How do you choose the RFID fixed asset management system solution?
A common error zone: I thought RFID asset management was "Buy the label and buy a reader."
People come up and ask, "How far can your readers read?" How much is a label? It's too simple to think about. In fact, RFID fixed asset management is one set of things.Label + Hardware + Software + Business ProcessThe whole thing, hardware is just an entrance, the real hard part is how data flow, how processes run, how mistakes go back. When you assess a plan, ask "Is this system going to solve our slow count, our books don't match, our responsibility is not clear on these specific issues," which is more specious than asking technical parameters.
Step one: clear your own asset management.
Better solutions, too, can be problematic in inappropriate settings.
- What is the asset level? 500 units, 50,000 units, 500,000 units, and a completely different programme structure.
- What is the distribution of assets? Is it concentrated in one building, scattered across multiple factories or across cities and even provinces?
- Which ones are the most painful? The time taken to make monthly count, the loss of equipment and delays in updating after transfer?
- What are the existing ERP or financial systems, and can you access the data?
We saw a lot of customers coming up in the front of the project, and we found that the system was doing it fast, but the data didn't go back to ERP, and the finance side did half with Excel, so we usually get together with the clients to figure out these pre-problems and then discuss the configuration.
Hardware level: three options, frequency, label, and reader determine the bottom capacity
RFID is divided by frequency, mainly forUHF (UHF, 860-960 MHz), reading and writing distance is typically between 3 and 10 metres, which is suitable for a mass inventory in the room. A few scenarios, such as metal-intensive cabinets, equipment casings, use high frequency (HF, 13.56 MHz) or a specific UHF label with metal resistant design.
The hardware selection should focus on:
Tab Selection
- Paste Materials: The reading and writing effects vary greatly from plastic to metal, to embedding in the metal surface.
- Useful life: The ability to withstand high temperature and oil pollution in the industrial environment, with some scenarios requiring high temperature-resistant labels (-40°C to above 200°C).
- Memory Capacity: A single code is sufficient for a general label, but if information such as the name of the asset, date of purchase and so on is required, select a large volume.
Reader Deployment
- Handheld Terminal(PDA): A suitable mobile inventory, with staff taking the device to scan the area and reading hundreds to thousands of labels once.
- Fixed-Screen Reader + antenna: Fits to a pass-through inventory, such as automatic identification of assets at the entrance or exit.
- Card Dealer: For initialisation of labels, for writing asset information.
Impact of the environment on recognition rates
This is often overlooked. The metal shelf is dense in the warehouse, the equipment is set up on each other, the UHF labels are leaked because of signal reflection and blocking, and the industry usually has a rate of error ranging from 0.5 to 3%, which may be more complex. A spectrometer-based solution requires suppliers to do it.Field environment testinstead of just giving one theoretical parameter.
Software level: This is where the real program gap is being created.
The software is the vehicle for business processes.
Inventory Logic
A good count module will distinguish.Whole, draw, area, single plate, by department, asset class, and user. Automatically cross-referenced data after the inventory is completed, generating a discrepancy report instead of throwing the data to the administrator for manual reconciliation.
Data set-forming capability
Could you provide a standard API interface (RESTful, SOAP etc.), can you connect with mainstream ERPs like Quino-Fullfly, SAP, Oracle, or could you import and export the Excel asset list, which directly affects whether or not the next step can run through. Closed systems are as beautiful as interfaces, and data cannot be made available in vain.
Permissions and Processes
The process of acquiring, transferring, scrapping and repairing assets can be defined and the approval stream can be connected to the enterprise’s OA. Unlike each enterprise’s management system, rigid processes can make the system a setup.
Statement and retroactive
The full life cycle record of assets from the time they are entered into the bank to the end of life, including a handover log for each change in location and responsible person.
Do not lose sight of hidden costs: labelling deployment, training and follow-up
The price of "labels + readers + software authorization" is often only seen in the quotations, and there are several more easily ignored costs in the actual project:
| Cost item | Why not? |
|---|---|
| Print and paste field labels | 50,000 tags each take months to put up, and there is a need for special printers and personnel. |
| Initialization of data | The workload of importing, reconciling and reproducing existing asset desk accounts into the system is often underestimated. |
| Staff training | The inventory personnel, the asset managers and IT operations each require training at different levels. |
| System Transport | Servers, networks, databases and clerical solids are upgraded and require a steady human input each year. |
When shanghai-Shanghai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Wai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Tai-Wai-Wai-Wai-Wai, when it comes to the client interface, it is usually recommended that one-time input and one-way costs be accounted for over three years, and that the overall cost of ownership (TCO) of different programmes be compared instead of looking at the first price only.
Vendor assessment: the delivery experience and long-term service capacity
The final selection of suppliers can be measured from these dimensions:
- Project experience of the same type: In cases of close proximity to your industry, the size of assets, how many have you done and how long have you been running?
- Whether software and hardware are self-studyed• The labelling programme is easily clogged at the end of its secondary development and upgrading, with greater flexibility in self-study.
- Methodology of implementation: Is there a clear delivery process, such as needs study field test pilot full-time online?
- After sale, respond.(b) Length of failure response, spare parts supply capacity, remote support and co-operation with on-site support.
- Data securityAsset data are sensitive information and deployment modalities (public cloud, privatization, local deployment) need to be selected in accordance with corporate compliance requirements.
Assessment checklist: Enough to ask suppliers.
- How much more efficiency can an inventory be achieved in a scenario like mine? How many person days does it take?
- Could software open the API to our existing ERP?
- What's the drop rate on my site?
- A full cost of ownership over three years?
- Is the system upgrade free or paid for after going online?
The selection of the RFID fixed asset management programme is not a choice of hardware in essence, but rather of hardware.A mechanism for long-term asset management. It is often more efficient to draw a line between their own needs and see if the other side's technology and services match up with each other than to compare technical parameters over time.Shanghai's technology for the best.The long-standing approach is to get the scene clear with the client, and then give a combination of software and hardware, instead of putting a template on all projects. This idea is validated in most manufacturing, energy, and business units' fixed asset projects.

Ms. Lei
Mr. Pang