How do RFID asset identifiers be designed? Coding rules and label selection
RFID Knowledge

How do RFID asset identifiers be designed? Coding rules and label selection

PublishedShanghai Zejie Smart Technology Co., Ltd.

The RFID asset identifier design, the first step being not to pick a label but to set the code rules to death. Fields are divided and length enough so that subsequent business adjustments do not push back and forth.

Point 1: Code rules are most useful in "striped"

A number of projects are starting to replicate the GSTIN or GIAI structure in the EPCglobal, and it turns out that the field of their assets is not right, and it's difficult to keep them as hard as a label. The more stable approach is to use the code as an address structure, organized by scene.

The UHF tags (working band 860-960MHz) contain 96 or 128 bits of EPC. It is recommended to keep the total number within 96, leaving the rest for subsequent expansion or private manufacturer fields.

Point 2: Label selection frequency, chip, sealing.

Frequency determines the use of scenes

UHF (ultra-high frequency) provides long-range batch reading and is the first choice for warehouses, production lines, and outdoor assets. A fixed four-channel reader can achieve an 8-10 m read range with a clear line of sight. HF (13.56 MHz) requires close, aligned reads and performs well near metal, so it is better suited to enclosed spaces such as tool and file cabinets. LF (125 kHz) penetrates obstacles well but has a very short range, and is mainly used when retrofitting legacy equipment for compatibility.

Chips affect reading and writing sensitivity

In the same range, a higher sensitivity chip can read one to two metres more. For example, Impinj Monza 4 series, Alien Higgs 9 series, NXP UCODE 8 industrial chips are more stable in a dense stacking scene. The selection of which is also based on the reader compatibility and inventory cost, not just the parameter list.

Encapsulation is determined by the asset environment

For the level of protection, the normal storage scene is at least IP65; an outdoor or chemical workshop suggests a reference to IP67 or IP68. The work temperature range is checked, for example, the type of -40°C that is selected in the freezer.

Element 3: Match placement with the polarization direction of the reader

A tag is not necessarily readable just because it has been attached. On warehouse inventory projects, about 30% of missed reads come down to tag placement. Here are some engineering details that are easy to overlook:

The same type of asset is uniformly fitted at a height (e.g. 1.5 metres above ground) and directed, with the key points written into SOP, which usually more than doubles the efficiency of the inventory.

Point 4: Several pits repeatedly stepped on in the project

The position at the top of three is "right" and this section says it's easy to flip over:

These pits have been encountered more than once in the field. Shanghai-based Chettech's approach is to make three separate deliveries of code rules, label selection forms, and SOP, which will be matched with clients for bulk purchases and construction, minimizing the cost of remediating at the site.

The RFID asset identifier is a simple, actually detailed, activity. The code rules determine whether to expand, the label selection type determines whether to read, and the installation specifications determine whether to read. It's not difficult to do all three things right, with an inventory accuracy of over 99%. First, the rules and data are clear, then next, the procurement and construction are relatively secure paths.