What's the rfid device, common type and typical application scene science parse?
The choice of RFID is usually stuck to two things: low frequency, high frequency, very high frequency, so many types of ultra-high frequency are not known; the same type, low-cost but not far-readable, high-value but large, which one. The order of judgement is not really complicated -- first by identifying distance and operating scenes, then by checking whether batteries and sensory functions are needed, and finally by checking on-site metal, liquid, temperature environment to match model.
What is RFID?
RFID is called Radio Frequency Identification, which is translated into Chinese as radio frequency recognition. It reads the information stored in an electronic label on a project by radio wave, and the process does not need light, nor contact, so it is also called wireless radio frequency identification or electronic tag recognition.
A running RFID system, usually consisting of three parts: an electronic label (Tag) on the object, a Reader to read and write data, a back-office system for processing data. Readers send radio frequency signals, labels into the signal range are "awakened", retransmit information such as internal ID back to the reader, complete in mseconds. The difference between a barcode, two-dimensional code, and RFID is that it can be read more than one time without aim, can work in bulk under defusing or covert conditions, and is more environmentally resistant.
The label itself consists of both chips and antennas. The chip contains the only ID (commonly known as EPC) and user data area, which are used to receive radio-frequency energy and retrace data. Filling the chips and antennas into different materials creates all the forms we see in anti-metallic labels, laundry tags, paper tickets, medical wristbands, etc.
Common type comparison: by frequency and power supply dimension
The RFID equipment on the market, which selects frequency bands before labeling is source or non-availability. The difference between two dimensions is very large.
By frequency band: low, high, UHF
Low frequency (LF, 125 ~ 134 kHz): Identification distance is usually within 10 cm, insensitive to metals and water, and it's very permeable. It's often used for animal earmarks, for a closed card or scene that requires "near to read" -- reading at a slow pace, only one label at a time.
HF, 13.56 MHz: Typical recognition distance of 10 cm to 1 m is paid by the NFC, library bookcards, bus cards, standard frequency bands for second-generation ID cards, corresponding to ISO 14443 and ISO 15693 protocols. Reading distance is moderate, label costs are low, and tolerance for liquids and metals is average.
UHF (UHF, 860-960 MHz): Identification distance from 1 m to 10 m corresponds to ISO 18000-63 (EPC Gen2) protocols, which are logistics warehousing, retailing points, vehicle recognition main frequency bands. Dozens of labels can be read in bulk at a time, and they are efficient, but sensitive to the reflection of metals and liquids.
Microwave bands (2.45 GHz, 5.8 GHz): Identification distance is much further and is used mainly on the freeway ETC (5.8 GHz), auto-identified vehicles, specific industrial tracking scenes, which are relatively small.
By electricity: non-existent, semi-active, active
Passive: There is no battery in the interior, radio-frequency energy sensor power from a reader. The advantages are cheap (single labels to a few pieces), long life (theoretically over 10 years of life) and small size. The disadvantages are short recognition distance, which requires the capacity of a reader.
Semi-passive: The labels have batteries to power the chips, but communication is still radial. These labels usually integrate temperature, humidity, vibration sensors, and are monitored in cold chains, where valuables track such scenes that require sensor data.
Active tags have built-in batteries and transmit their own signals. They have the longest read range, from tens of meters to more than 100 m, and are often used for containers, large assets, and vehicles. They cost more, from several tens to several hundred yuan per tag, and the battery needs replacing every three to five years.
Reference to cost gradients
LF and HF tags typically cost CNY 0.50–3 each. Mainstream passive UHF tags cost CNY 0.30–2 and active UHF tags CNY 30–200. Disposable ticketing tags, such as event wristbands and single-use tickets, can cost a few tenths of a yuan. Fixed UHF readers cost several hundred to several thousand yuan; handhelds range from CNY 1,000–2,000 to more than CNY 10,000. Once antennas, feed lines, controllers, and cabling are included, these are the costs most likely to run over budget.
Applying a scene selection: what mix of different operations
The same RFID labels vary greatly in the different business.
Storage logistics and retail inventory counts
Supermarkets, e-commerce warehouses, and third-party logistics are the most established uses of UHF RFID. A fixed reader mounted at a portal or gantry can read all the tags on a pallet carrying dozens of cases in one pass, cutting a manual count from more than ten minutes to a few seconds. In retail stores, UHF tags are sewn or hung on clothes hangers so the back end can show stock by SKU in real time and flag styles that are out of stock and need replenishing.
It needs to be noted that metal shelves, liquid commodities (beverages, bottled cosmetics) interfere with UHF signals, either by changing anti-metallic or anti-liquid labels, or by adjusting the placement of the reader antenna. If the goods are in a tight code, the adjacent label "Scramble" can also lower their recognition rate.
House arrest, attendance and personnel management
Write a security clearance card, a garden visitor's pass, and hospital medical staff cards are mostly HF (13.56 MHz). The reason is simple: recognition distance means that it is not easy to read in an "in-space" and must be close or brushed to open the door, which is safe. Undiscovery identification (employees walk through gates, unstoppable people) is required to use UHF.
Asset management and equipment inspection
Tools, instruments, vehicles, high-value consumables in hospitals, machines and plates in the machine room are the most common scenes used when using a UHF passive label combined with active tags. Each asset is labelled, a hand-held reader is taken for an inventory and inspection, and the work is compressed to half an hour, and data automatically enters the system.
Vehicle identification and highway
ETC does not charge for parking at 5.8 GHz microwave bands, which are done in a few hundred milliseconds, and is typical of the use of RFID in large-flow scenarios. Similar is sector vehicle management, port container recognition, mine vehicle movement, all of which follow the same principle.
Medical treatment, paper, security against fraudulent retroactive
HF hospital wristbands let nurses verify patient identity when preparing medication or drawing blood, helping prevent infant mix-ups and medication errors. Event tickets and race wristbands often use disposable UHF tags so dozens of people can pass a gate at once. RFID is also common in anti-counterfeit traceability for luxury goods, tobacco, alcohol, and produce, with a back-end database assigning a unique code to each item.
Common pits in deployment
The RFID principle is not complex, but it has landed on the ground and made a lot of holes. The high-frequency problems we have encountered in the project are concentrated on the following points.
First, metal and liquid interference. The UHF signal is fully retroreflective, the liquid is absorbed, leading to failure or error in reading data. The solution is not to change readers, but rather to change labels -- metal-resistant labels usually have a suction material that stabilizes the label on the metal surface.
Second, the label direction and polarization problem. The antenna of the UHF tag is directed, it's mistified, it has arc surface (e.g. metal drums, sphere), and the signal range is significantly water-digged. Field tests must be real packaged, put in real form, confirmed by real motion lines, not to be able to get on the line with some naked tags on the desktop.
Third, multi-label collisions. If the response mechanism is not adjusted in large quantities at the same time, there will be either "read to half" or "read data misdirected." The EPC Gen2(ISO 18000-63) protocol has solved most of the collisions, but it is important to make sure that both the reader solid and the label meet this generation's criteria, and that neither version is easily readable.
Fourth, third-party systems dock. RFID Zreader can only do "read to data" by itself, so that the data can really be used, and you have to match business systems such as ERP, WMS, MES. When selecting RFID options, it is best to confirm in advance whether suppliers can provide complete API, intermediates, and experience with existing systems. Shanghai Cheatech, while serving manufacturing clients, is accustomed to placing IT teams together at project stage, to pre-empting data formats, field mapping, and to pre-determine the logic of unusual processing, and avoid going back online.
Fifth, ambient temperature and containment. Outside the house, cold chains, high acid alkalin conditions, normal paper labels are removed or disabled in a week or two, choosing an industrial-grade seal (PC, ABS, ceramics) label, which is several times more expensive per unit but can be pulled to 5-10 years of life.
Summary of Selected Decision Making
Back to the initial intricacies, the test can be condensed into three sentences: short-range single-form recognition of HF, long-range mass identification of UHF; budget constraints, which do not require sensor data being unsourced, and remote or sensory selection of active or semi-active; metal liquid environments that are unique labels, and no general model for luck.
The selection suggests small field testing, covering at least 3-5 real-time positions, real packaging, real motion lines, and mass purchasing. The RFID device is not expensive in itself, but the wiring, debugging, the system docking is a really time-consuming place, and early testing can put a lot of pressure on the cost of returning to work.

Ms. Lei
Mr. Pang