What are the technical principles for rfid radio frequency recognition, frequency range and application scene resolution?
RFID radio frequency recognition. What is it?
RFID is a technology for automatic identification of target objects by radiowave. A basic RFID system consists of three components:TagThe radio frequency signal.ReaderAnd the energy and data transfer.Antenna. When the label enters the workspace of the reader, the electromagnetic wave launched by the reader activates the tag chip, and then the label returns its own coding information back to the reader, the entire identification process does not need contact, no manual sweep is required, and it is often used as a bar code alternative for automated data collection.
What exactly is the RFID system composed of?
Take a look at the system and make up four pieces:
- Electronic Tag: Composed of chips and antennas, with the only identifier and operational data in the chip, divided into three categories according to the mode of power supply (self-carrying batteries), semi-inactive and passive (radio-frequency energy for readers), and industrially most widely used non-sourced labels.
- Reader: responsible for the launching of radio frequency signals, receiving label echoes and sending data backstages, which may be fixed (on a working space or door curvature), handheld (like a scaffold) or channel (integrated in a delivery line).
- AntennaPassing radio frequency energy between labels and readers in a variety of shapes, including tablets, Circumpolarization, linear polarization, etc., determines the shape and coverage of the identified area.
- Backstage system: typically an ERP, WMS (storage management system) or MES (manufacturing implementation system), of the enterprise, which is responsible for translating the data identified into operational actions.
What's the RFID working on?
The whole interactive process can be broken into four steps: the reader sends a specific frequency-based moded frequency signal out of the antenna, forming an electromagnetic cover area; when electronic labels enter this area, the tag antenna senses to electromagnetic waves and joins energy to activate internal chips; the chip transfers stored information back to the wave, which is to be sent back to the reader by a label antenna in reverse dispersing (which could be understood as "reflective back"); the reader receives a echo for decomposition, decoding, then sends data back to the backstage for business processing.
The first is the energy transfer.Close-up coupling.(typically a few centimeters to about 1 meter, common at 13.56 MHz HF) uses inductive coupling between the tag's coil and the reader's magnetic field for power;Far-field reverse dispersing(typically from 1 m to more than 10 m and common in UHF) works by having the tag antenna receive electromagnetic waves and scatter a signal back through the air, much like radar.
What are the common RFID bands? What are their characteristics?
The mainstream RFID is divided into four categories of work bands, with significant differences in application:
- Low frequency (LF) 125 – 134 kHz(b) Long wavelength, high permeability and low impact on metals and water, but usually only a few to ten centimetres of identification distance, mainly for animal earmarks, door-ban keys etc.
- HF 13.56 MHz: Identification distance is usually within 1 metre, protocol mature and globalised (ISO 14443/ISO 15693), and NFC uses this frequency, which is common in book management, second-generation IDs, public transport toms, etc.
- UHF 860-960 MHz: Identification distance can be as far as 10 metres or more, and support a single reading of dozens or even hundreds of labels, which are the mainstream programmes for warehousing logistics, retail clothing, airport baggage separation but are susceptible to metal and liquid interference.
- Microwave (2.45 GHz / 5.8 GHz)(b) Wide-band resources, high transmission rates, often used for real time positioning (RTLS) and free-time parking fees on highways (ETC), and relatively higher costs of tagging and reading and writing.
Where do different frequencies work?
See a few more typical applications:
- Animal and agricultural traceabilityLow frequency labels, such as pig earmarks, meat cow retroactive, can be read through metal bars in the ring.
- Documents and ticketingThe 13.56 MHz HF, such as second-generation identification cards, tickets to the area of view, are also included in this category in municipal bus and mobile traffic combined cards.
- Retail and warehouse count of clothingUHF passive tag, one size for a costume and the doorway with a handler to take tens of thousands of SKUs in bulk, which is more than 10 times more efficient than the traditional bar code.
- Automobile manufacturing and logistics traysUHF tags are placed on the swinger or tray, and the entire tray is automatically accessed with a channel reader.
- Smart traffic.: 5.8 GHz Microwave ETC-cargo unit OBU, which does not require parking fees when a vehicle passes through the toll station and usually has an entire identification time of around 200 ms.
What difference does RFID make to barcode?
This can be compared to five dimensions:
- Memory Capacitybar code can only contain a dozen characters, and the RFID labels can range from dozens to thousands of bytes and can be written into serial numbers, production dates, batches, etc.
- Reading MethodBarcodes must be scanned and RFID does not need visual, contact-free one-off identification through paper, wooden boards, plastic (non-metallic non-liquid).
- Batch Read: bar code only one at a time, RFID Zreader can identify dozens or even hundreds of labels at a time, with large differences in the efficiency of the inventory.
- Durability and reuse: The bar code cannot be changed after printing, and the RFID label can be repeated and recycled, usually with a life of more than 10 years.
- CostPassive UHF tags have been down to a few cents to one or two dollars, but the overall system input is still above bar code and requires a reader, antenna and software package.
What are the issues to be addressed in the actual deployment of RFID?
In land-based projects, several types of problems are most common and affect the recognition rate:
- Tabs match sceneMetals and liquids have a significant impact on UHF RFID, are not readable directly on the surface of the metal or in bottles filled with water, and need to be labelled as resistant to metals or adjusted for installation.
- Reader LayoutThe number of antennas, the height of installation, angle and launch power need to be adjusted to actual field tests, so "onboard readable" is not valid in many industries.
- Multiple labels against collision: When a large number of labels are simultaneously entering the identification area, an anti-crash algorithm (e.g. ALOHA mechanism based on ISO 18000-63 / EPC Class1 Gen2) is required to identify each one at a time, and the rate of too high label density is significantly slowed.
- Interfacing with existing systems: Many companies adopted ERP or WMS systems more than a decade ago. Their interface fields and data formats may not integrate directly, requiring middleware or custom development.
Shanghai-based Selective Technologies, in the past garment and manufacturing industries, usually do a field RFID survey, measure metal reflections with vector network analysers, run reading rates at different locations using label testers, and determine label type and reader power, which are key to ensuring that systems are stable in the later stages.
What are the practical suggestions for selection and landing?
If you first contact the RFID project, you can move in this order: first to identify specific problems (e.g. inventory, access library, security or backtrack), then to select the corresponding frequency and label pattern based on the material; then to do a small sample test to verify recognition and stability in your real environment; and finally to consider the type of reader, the integration of back-office systems and long-term transport costs. The RFID is not a "findering" technology that treats it as hardware, software, a fully-processed project, which tends to be more cost-effective than one.

Ms. Lei
Mr. Pang