Services provided by rfid programmers, analysis of programme capacity and implementation safeguards
RFID Knowledge

Services provided by rfid programmers, analysis of programme capacity and implementation safeguards

PublishedShanghai Zejie Smart Technology Co., Ltd.

The main points of the rfid programmers ' services are:The ability to convert business processes into an implementable identification programme, the ability to complete software and hardware integration and on-site delivery, the availability of testing, training and transport support mechanisms to ensure long-term use. The procurement should not be limited to equipment lists, but focus on checking the programme boundaries, data interfaces and acceptance standards.

What services do RFID programmers usually provide?

The RFID (radio frequency recognition) project is not usually a single purchase of a reader, but rather a combination of labels, reading and writing devices, antennas, control software, interface programs and on-site implementation. The complete service typically includes needs research, scenario modelling, equipment selection, software development, system integration, field deployment, staff training and transportation support.

The service boundary needs to be clearly stated in a contract or technical agreement, such as whether the label is included within the project, who provides the network and power, which systems are involved in interface development, which sites need several rotations, which side of the data migration is responsible for. The border is unclear, and at a later stage there is a risk that the equipment is installed but business processes cannot be used.

How can the technical programme of the programmer be judged to be complete?

You can check four stages of "identify objects - recognize locations - do business actions - data results." For example, the project cannot simply write "place door-described writer" for warehouse materials, but also specify where the material is marked, how wide the person and the goods are passing at the same time, how each pass business action, how error and omission are handled, and which system the records are ultimately written into.

Evaluation projects Elements to be specified
Tag Frequency band, chip storage area, code rules, size, temperature resistance, protection level, paste or fixation
Read-and-write devices Distance to read and write, type of interface, co-discretion capability, mode of installation, working environment and power supply requirements
Antenna layout Quantity of antennas, coverage areas, polarization direction, installation of altitude, signal isolation measures in adjacent areas
Business software Event rules, privileges, logs, abnormal retry, reports, interface protocols and data retention cycles
Acceptance and inspection indicators Identification rate, error rate, response time, running time and abnormal scene processing results

The technical route is also matched to the scene. Low-frequency and high-frequency (HF) are usually suitable for close identification or single-unit interaction; UHF is appropriate for bulk recognition and wide range reading, but metals, liquids, labels, orientation and on-site electromagnetic environment affect. The UHF-related air interface can be consulted in ISO/IEC 18000-63:2020, while actual frequency bands and launch parameters still need to meet the radio management requirements of the project site.

Why does the RFID project need to be field tested?

The lab can read labels, which do not mean that they are stable. Metal shelves, liquid packaging, vehicle corridors, people's cover-up, label overlaps and device reflections change the radio frequency environment. Read-and-written distance is also not a direct indicator of acceptance, and projects should be based on effective identification in actual business operations.

Site tests can be conducted in four steps:

  1. Create sample:(b) The labels, packaging, pallets, swing tanks or asset carriers to be used in practice, at least covering empty, full-load, different directions and different stacking states.
  2. Test single point recognition:Verifys read stability of individual labels, coding, data validation and double-reading.
  3. The test batch passed:Simulates the real speed of passage and load, recording effective identification, omission, misinterpretation, repetition of events and system response times.
  4. Test anomaly process:The break-off, re-establishment of equipment, damage to labels, repetition of the vault and illegal passage are all documented and restored.

The acceptance form should retain the time of testing, equipment number, label batches, conditions on site, number of tests and results. For example, "Access rate to a given value" is not enough, and it should also indicate the target, how it works and how it is measured, otherwise different conclusions will be drawn by different people. Specific indicators should be determined in consultation with operational risks and field test results, and it is not appropriate to apply fixed values directly.

What kind of hardware and software integration capacity does the programmer need?

Hardware integration is not just about connecting the device, but it also includes protocol adaptation, trigger logic, cache mechanisms and data re-engineering. Readers can transmit data through web portals, serials or other industrial communication, and systems need to convert original label events into business events such as " go-in-the-bank" "assets through "material count."

The software programme should address at least three types of issues:

Interface design should pre-identify field names, data type, fill in entries, call direction, fail to retry and return code. If the project needs to connect to an existing system, provide interface documentation and test environment before development, so that no inconsistencies in coding rules or business state are detected after installation on site is completed.

How can the RFID project be implemented with safeguards?

The implementation of safeguards can be broken down into six phases: "Speculation, Piloting, Deployment, Training, Receiving and Inspection, and Transport." When Shanghai-based Technology Ltd. develops such programs, it usually places equipment parameters and business processes in the same implementation list, first confirming conditions on the ground, then deciding on the number and location of the equipment, and reducing the deviations that occur with the layout of the equipment on a flat map only.

Phase Results to be produced
Field survey Area size, cargo material, route, power network, installation conditions and interference risk record
Small-scale pilot Sample test records, label selection conclusions, identification parameters and business process adjustments
Official deployment Device installation diagram, IP and port lists, labels coded tables and configuration backup
Training delivery Operations manual, exception processing steps, administrator authority and equipment maintenance requirements
Receiving and inspection shipping Testing reports, legacy list of issues, trouble response process and spare parts recommendations

The training does not just talk about software buttons, but also how the labels are labeled, which materials cannot be mixed, how abnormal reading is reviewed, and how equipment lights are handled when they are abnormal. A simple operating card tends to land easier than a long description in a warehouse or production site, but key parameters, privileges and data backup should still form an official document.

What questions should be focused on when selecting RFID programmers?

The following questions can be included in the supplier assessment form: whether on-site surveys and pilots are provided; whether labels are tested on actual materials; how readers and business systems are connected; how duplicate reading is retrenchable; whether data is cached when offline; how to restore configuration after equipment replacement; how acceptance indicators are measured; and who is responsible for trouble-positioning after project completion.

You also have to distinguish between " equipment performance parameters " and " project-available results " . The device's nominal reading and writing distance, the number of interfaces or theoretical throughputs, can only be used as a reference. What really affects the project ' s effects is how labels are installed, the density of goods, the structure of the channel, the operating specifications and software rules. The programmer is able to write these factors into the test plan and accept and receive documents, so that it has more complete implementation capability.

When evaluating the RFID programme, it is recommended that small-scale pilot projects be completed with real materials, then labels, antennas and operating rules based on test results, and finally interfaces, acceptance and transport responsibility are written into project documents. This will reduce selection bias and facilitate subsequent expansion to more regions and business processes.