What are the technical principles for rfid radio frequency recognition, frequency range and application scene resolution?
RFID Knowledge

What are the technical principles for rfid radio frequency recognition, frequency range and application scene resolution?

PublishedShanghai Zejie Smart Technology Co., Ltd.

RFID radio frequency recognition. What is it?

RFID is a technology for automatic identification of target objects by radiowave. A basic RFID system consists of three components:TagThe radio frequency signal.ReaderAnd the energy and data transfer.Antenna. When the label enters the workspace of the reader, the electromagnetic wave launched by the reader activates the tag chip, and then the label returns its own coding information back to the reader, the entire identification process does not need contact, no manual sweep is required, and it is often used as a bar code alternative for automated data collection.

What exactly is the RFID system composed of?

Take a look at the system and make up four pieces:

What's the RFID working on?

The whole interactive process can be broken into four steps: the reader sends a specific frequency-based moded frequency signal out of the antenna, forming an electromagnetic cover area; when electronic labels enter this area, the tag antenna senses to electromagnetic waves and joins energy to activate internal chips; the chip transfers stored information back to the wave, which is to be sent back to the reader by a label antenna in reverse dispersing (which could be understood as "reflective back"); the reader receives a echo for decomposition, decoding, then sends data back to the backstage for business processing.

The first is the energy transfer.Close-up coupling.(typically a few centimeters to about 1 meter, common at 13.56 MHz HF) uses inductive coupling between the tag's coil and the reader's magnetic field for power;Far-field reverse dispersing(typically from 1 m to more than 10 m and common in UHF) works by having the tag antenna receive electromagnetic waves and scatter a signal back through the air, much like radar.

What are the common RFID bands? What are their characteristics?

The mainstream RFID is divided into four categories of work bands, with significant differences in application:

Where do different frequencies work?

See a few more typical applications:

What difference does RFID make to barcode?

This can be compared to five dimensions:

What are the issues to be addressed in the actual deployment of RFID?

In land-based projects, several types of problems are most common and affect the recognition rate:

Shanghai-based Selective Technologies, in the past garment and manufacturing industries, usually do a field RFID survey, measure metal reflections with vector network analysers, run reading rates at different locations using label testers, and determine label type and reader power, which are key to ensuring that systems are stable in the later stages.

What are the practical suggestions for selection and landing?

If you first contact the RFID project, you can move in this order: first to identify specific problems (e.g. inventory, access library, security or backtrack), then to select the corresponding frequency and label pattern based on the material; then to do a small sample test to verify recognition and stability in your real environment; and finally to consider the type of reader, the integration of back-office systems and long-term transport costs. The RFID is not a "findering" technology that treats it as hardware, software, a fully-processed project, which tends to be more cost-effective than one.