The rfid handheld library is different from the inventory, and the workflow and efficiency are analysed
RFID Knowledge

The rfid handheld library is different from the inventory, and the workflow and efficiency are analysed

PublishedShanghai Zejie Smart Technology Co., Ltd.

The warehouse has a set of equipment around the shelf, the handheld hanger and the inventory machine look like it, with different attention: the handheld library emphasizes “take your hands and read them”, and the CDC places more emphasis on “completed inventory tasks” - either hand-held or cart-driven. The selection model cannot be only named, depending on the number of labels, the shelf environment, data interaction and people's movement lines.

Found at the scene: similar equipment names, different results of operations

In a warehouse with the contents in a storage box, staff members move along the shelf path with an RFID reading and writing end. The device reads labels, but after the count is over, the system still shows that there is a body of unconfirmed material. It turns out that the review is not "readable" but whether the equipment supports the inventory task, extraordinary reviews and returns the results.

The RFID Handheld Library is usually the form and mode of use of equipment, with emphasis on handheld, mobile, live reading; the RFID Clipcler is more like business name, with emphasis on inventory functions, may be handheld terminals, or may be an antenna-driven cart or other mobile device. The two may be the same type of equipment in actual procurement, but the criteria for judgement are not the same.

Let's start with two concepts: one for the form, one for the mission.

Comparative items RFID Handheld Cartridge RFID Clerator
Focus Hand-held mobility, read and access to equipment Completion of construction tasks, reading, matching, review and upload
Common form Handheld terminals plus RFID reading and writing module, or one-stop handheld Mobile devices such as handheld, cartage, backpack
Fit to scene. Repository review, bulk material search, temporary disk Periodical, regional, asset inventory and review of discrepancies
Select Key Hold weight, continue sail, read stability, screen and button Task processes, data interfaces, anomaly processing and reporting capabilities

So, it cannot be simply understood as "a handheld library is inefficient and a count machine is very efficient." If the inventory machine is itself handheld, the two may be just named in different ways; if the inventory machine is equipped with a larger antenna, a pusher structure and task software, it usually moves more often in a large volume count, but when searching for narrow storage or bulk material, the handheld device is more flexible.

Real business processes: from construction tasks to recognition of differences

When the equipment is on site, the inventory usually passes six steps.

  1. Creates an inventory task.The list of tasks by warehouse, storage area, location, material type or asset range is downloaded.
  2. Checking labels and equipment.Confirms that the label is on the outside of the material, so as to avoid being covered by metal, liquid or multi-layer packaging; checks equipment power, network, time and data versions. Metal shelves, liquid containers change radio frequency signal performance, cannot directly apply test results in an empty environment.
  3. Read by fixed route.Moves in the order of the numbering of the library, keeping the device relatively stable. In the example operation, you can assign each of the positions to three reading positions, one to the left, one to the middle and one to the right, and reduce the leakage caused by the change in the position.
  4. Repetition and anomalies in field handling.The system needs to distinguish between " Accumulated" "Suspect repetitions" "reading but not within the mission" "does it read but does not read." Only a total number is shown, which does not help people quickly locate differences.
  5. Review of missing material.The review does not directly classify all differences as inventory errors.
  6. Upload and produce results.The time of the inventory, operator, repository and unusual records should be kept after the network is stabilized, and when the network is unstable, it is stored locally, reconnected and synchronized.

When Shanghai-based Sieger Technologies Ltd. combo such projects, it usually separates "read action" from "business confirmation": equipment reads labels that only represent a successful radio frequency recognition; inventory is accurate and subject to task matching, unusual review and confirmation of results.

How does efficiency work? Don't just read the labels every second.

The efficiency of the inventory can be estimated in a simple formula: valid confirmation of quantity = total operational time for completing the confirmed quantity of material. The “effective confirmation” here is not the number of labels that the device read out in the moment, but has already been weighed off, and tasks are matched to the amount that can be submitted.

Take a set of 2025 examples as an example: 800 items to be found, 80 minutes for on-site reading and review, 760 valid confirmations, 9.5 per minute effective recognition; 40 remaining items require separate review. If only the number of labels that the device has read in a short time is recorded, a higher figure may be obtained, but this number does not directly represent the speed at which the inventory is completed.

Efficiency factors On-site performance Improvements
Label density Too many labels in the same area, and can be read over and over again Set reading and writing time and weighting rules by library or batch partition
Material material Metals, liquids, dense stacking can lead to instability in reading Repositioning of labels, an angle of equipment and reading distance and field sampling
Personnel route Move back and forth, repeat the count across the area, add invalid time Plan a one-way route by the number of the storage area and complete a regional re-routing
System Interaction Frequent bullet windows, network waiting slows down on the ground. Support for offline caches, bulk uploads and abnormal centralized review

The device parameters are also tested in the actual scene. You can set a starting distance of 2 m, 4m and 6m at the same library position, with a valid reading number, repeat and miss; then change the device's direction and see if the results change significantly. This test is closer to real work than the reading distance on the single page.

What do you do when you miss and misread?

The most common error area on the scene is to re-scanning the equipment close to the label and confirm that it ends when read. This will only solve one material in the immediate future, and it is not possible to judge whether similar problems will recur in the entire inventory.

The more secure sequence of processing is to first confirm the existence of a label, then check its location and direction; then change the angle of the device and material to exclude the shielding effect; if it is still not possible to read, identify the material with an artificial code and record the unusual type. If there are successive omissions in the same library, the extension should be suspended and the adjacent compost taken for comparison tests.

How to choose: Match by business scene instead of buying by name

If the work is to find single-ware, mobile libraries, shelf review, handheld storage machines are usually more convenient, focus on the overall weight, use time, hold, scrutinizing and offline capacity. If the inventory is larger, labels are concentrated, the storage area is fixed, the inventory equipment with a larger antenna or pusher structure can be further evaluated, coverage is focused, walk stability, mission software and data interfaces are more secure.

A small-scale validation can be made in a real storage area before the purchase, with at least five results recorded: effective reading rate, repeat reading number, average time of single-space use, abnormal review time, data upload success. Tests should cover paper boxes, plastics, metal and liquid near, not just empty site testing.

The question is not only “how far can you read” to determine whether the equipment is suitable, but also “can you say what has been identified, what has been omitted, which is not in the mandate and who reviews the differences after the exercise”.

Handheld libraries solve mobile reading problems, and the inventory machines solve a full-scale inventory task, which may overlap or be configured differently. Selecting first draws people's paths and data flow, then reads them with real material, reviews and upload tests, usually finding a suitable solution more easily than looking at a single device name.