How much for rfid set, configuration and overall cost elements
RFID Knowledge

How much for rfid set, configuration and overall cost elements

PublishedShanghai Zejie Smart Technology Co., Ltd.

What exactly is a RFID system?

Draw the "one" boundary first, and then talk about money. A running RFID system contains at least four pieces: electronic tags (on objects, data storage), readers (launching and receiving radio frequency signals), antennas (connecting readers, responsible for signal range and reception) and back-end software (also called intermediate, responsible for translating read data into information that is available in business systems).

RFID uses low frequency, high frequency, UHF three types of work frequency. The common scenes are HF (HF, 13.56 MHz) and UHF (UHF, 860-960 MHz). The costs and application scenarios vary widely: HF is often used for door-barreling, a cartoon, single-case commodity trace; UHF reading distance is far away, multiple tags can be cleaned at a time, and more suitable for warehousing and logistics batch count. This article is mainly about HF, because it is most used in enterprise projects.

Real space for hardware costs

The first set of variables affecting prices is hardware per se. Read the label: UHF passive tags (without batteries, with a reader for energy), which usually have a unit price of between 0.3 and $2 in common dry glue; if you are to be anti-metal, anti-liquid, high-temperature hard labels, the unit price is 3 to 15 dollars; if you have an LED indicator light or special envelope, the price goes up. You can write multiple times, encryptable labels, and it increases costs.

Reader prices cover an even wider range. Fixed four-channel readers (for up to four antennas, commonly used for access control and production lines) are typically quoted at CNY 3,000-12,000 per unit. More highly integrated industrial models can exceed CNY 20,000. Handheld readers, essentially PDAs with RFID, are usually CNY 3,000-15,000. The main differences are battery life, resistance to drops, dust, and water, and operating system. Antennas cost CNY 200-2,000 each. Standard panel antennas cost a few hundred yuan; high-gain and specialized models cost more.

A common pitfall: reader and antenna interfaces, protocols (the rules readers use to communicate), and power settings must match. Otherwise, incompatible equipment may need to be replaced altogether. Confirm the operating band and region in advance, as UHF allocations vary by country. China's band is different from those in Europe and the US.

Software and deployment, which is often underestimated.

Hardware accounts for half the cost or less. Back-end software comes in three tiers. The reader's SDK, a toolkit developers use to call reader functions, is usually free. Middleware, which aggregates and filters tag data before forwarding it to business systems, ranges from free open-source software to commercial versions costing tens of thousands of yuan. Full workflow management for functions such as receiving, counting, shipping, and dashboards typically costs RMB 50,000–300,000 depending on company size, with large projects sometimes exceeding RMB 500,000.

Deployment is another major cost. Fixed readers require mounting, cabling, and commissioning. For a warehouse, deployment on one floor often costs several thousand to 10,000–20,000 yuan. In a large facility with dozens of read points, installation services alone can account for 15%–30% of the total. Handhelds also need charging cradles, cases, and spare batteries.

There are also several easily neglected costs: on-site surveys (speculation of the environment with equipment such as spectrum spectrometer, identification of sources of interference and optimal location), initialisation of label data (pre-advertising basic information such as internal numbers, or "labeling" codes), training of personnel, and co-costing at the beginning of the line.

Budget reference for common scenes

Say a few of the typical projects with their approximate inputs, so you can estimate them against your own circumstances.

scene Size Description Total input range
Door count. 3-5 handheld + several labels CNY 30,000-100,000
Retailing of clothing Door-free antennas + test room + handheld RMB 100,000–300,000
Mid Warehouse 10-20 fixed points RMB 300,000–800,000
Large logistics centres 50 or more points + complete software RMB 1 million–3 million
Production line retroactive Multi-plug+Equipping Link 200,000–600,000 yuan

These figures are derived from the public industry programme and the project experience we have done. The actual price offers will also be influenced by the number of labels, the print-reader brand and software customization depth.

Several experiences in controlling the total budget

After a few times, you will find that the selection phase determines more than half of the costs and the deployment phase decides most of the remaining parts. The following paragraphs are very practical to us.

First, small-scale pilot projects are then spread out in bulk. Instead of all the points in one-time, a medium-sized warehouse project can run two or three-storey pilot projects, running for two or three months to determine the programme. The pilot phase usually accounts for 15 to 20 per cent of the total budget, but it exposes the programme risk more thoroughly.

Second, labels are often the largest of all. A project with 100,000 items in its inventory, if it buys 100,000 labels at once, may cost more than a writer. Split purchases, as required, are planned first.

Third, check interfaces and compatibility. Quotes usually do not include integration with your existing ERP system, such as Yonyou or Kingdee, or your warehouse management system (WMS). If custom development is needed, this can add several tens of thousands of yuan.

Fourth, maintenance and consumption are not missing. Reader antennas have a lifetime, labels are worn out, handheld batteries are changed for a year or two. Put these in the three-year ledger, compare them with one-time hardware offers, and get closer to real input.

Ask the price, and ask the question. The RFID device is not worth the investment, and ultimately it solves any particular problem, can RIO count? If you can talk to us with a specific scene and number, it'll be much less expensive than simply asking "how much" for a set. We have done a lot of this before, and we are more comfortable talking about configuration by scene than reporting a specific number.