How to select the material structure and installation of rfid against metal electronic labels
How to select the material: different matrices correspond to different metal environments
When you pick a metal label, it's not about the price, it's about the metal that you want to put on, how far away it is, how much budget is. When we do this, we usually fix the material, and then we talk about structure and installation -- in reverse order, and there's a lot of chance of getting back to work.
The main four basics that are common on the market are PCB plates (more commonly known as FR4), ABS engineering plastics, ceramics and cotton-composed aluminium. They vary considerably in metal environment and reading distance.
- PCB(FR4) materials:The classic design uses an antenna trace on standard circuit board material and special shielding on the metal-facing side. It offers stable read ranges, typically 1–8 m, and generally tolerates temperatures from −40°C to +85°C. One plant managing outdoor cabinets initially used tags with ABS housings. When cabinet surfaces reached more than 60°C in the summer sun, the housings warped and came unstuck. The plant switched to FR4, and the same batch has worked for three years without issue. FR4 is suitable for fixed assets, cabinets, and outdoor equipment.
- ABS plastics casing:The cost is lower than FR4, and the appearance can be of various colours and shapes, with a certain amount of shock. Read distance is usually shorter than FR4 at the same size, and it is common for scenes within 1-4 metres of reading range, such as warehouse shelves, tool management. Temperature limits are generally around 80°C, and high temperature environments are less recommended.
- Ceramic base:The size can be small, high temperature (some products can be at above 200°C) and chemical corrosion resistant, with reading distances usually not exceeding 1 m.
- Smelting cotton + aluminium soft structure:The thickness can be below 1 mm, and it can be placed on a metal surface with a certain radians, such as steel pipes, metal trays. Reading distance is short, usually 0.5-2 meters. Soft structures are themselves an anti-metal design, not just "a common label outside the bread-covered cotton."
The test is one sentence:The reading distance requires more than 3 meters, or the working temperature is over 70°C, giving priority to FR4; shape limits, normal ambient temperatures, demand value for ABS; small size, bad environment, ceramics; face of warp, thickness sensitivity, soft bubbles.
Structure form: One-pack or Part-Standing
When the material is finalized, the structure affects durability and post-maintenance.
- One-stop:Chips, antennas, shielding layers are all inside the label and the shell is sealed. The protection level usually reaches IP67/IP68, which can bubble water, prevent dust, resist fall. It suits the outdoors, the workshop oil-contaminated environment. A customer who does car parts, puts a single seal on the swing space, washes the high pressure water gun every day, has a two-year recognition rate of over 96 per cent.
- Division/dismantable:The base is fixed to the metal surface and the label subjects can be replaced separately. This structure is more cost-effective in a scenario that requires frequent changes of batteries (e.g., active tags) or updates of label information - no re-entry holes are required for the bottom.
If your device label is not moving for three or five years, the package will be more economical; if the label needs to be maintained on a regular basis, it will save you a lot of labour.
Installation: Repository, screw, nails, embedded
Four fixed methods are common for metal-resistant labels, with significant variations in their application.
| Modalities | Applications | Watch it. |
|---|---|---|
| 3M back-tape | Surface flat, large-scale metal surfaces with high level of installation and not often dismantled | The paste must be purified with alcohol and pressed for more than 10 seconds; temperature below 10°C suggests a heating glue or screw-relaying. |
| Screw fixed. | Outdoor, vibrating environment, large equipment | The hole should be precise. Don't drop the metal scrap on the label. |
| The nails are fixed. | Equipment that is long-term inactivity, highly vibrating and not allowed to fall | It's almost undiscovered after installation. |
| Embedded/calorized | Leave the installation scene before the plant is released | Pre- and equipment manufacturers need to communicate the chute size. |
Which one to look at, three points:The surface is flat, there's no strong vibrations, and it's not going to be broken.When all three are satisfied, the retrograde is the cheapest; if one is not satisfied, do not save that money to hold it.
There's a lot of details here that will be ignored:Air GapIt's crucial. The better to keep a buffer of 1-3 mm between the label and the metal face, which would reduce the metallic design. That's why flexible cotton structures are usually labelled with a bubble, rather than tearing it off with a direct metal.
Apply scene contrast
- Warehousing shelf (attractive):ABS shell + back-flip, the highest value for money option.
- Electricity equipment, cabinets (outdoor/high temperature):FR4 One-pack + screws fixed, read distance stable, long life.
- Workloads (frequent movement, shock resistance):FR4 or high-strength ABS+ back-flip, to be assisted by a screwdriver.
- Metal trays, steel tubes (twice):Soft cotton bubbles + high-intensity back rubber, avoiding punches.
- Mollusions, spray wires (high temperature/chemical environment):The ceramic base + screw or nail.
A few pits easy to step on.
- "Anti-metallic" is a word for all.Some labels are optimized for metal magnetized metals only, and drop off reading distance on stainless steel or aluminium.
- Ignores the validity of the back glue.If you have a 3M back-gel, you can store it for more than two years and the stickyness will drop significantly.
- Metal scrap and oil stains are all cleaned up.The back-flue glue is taped to the cut down, and the rate is probably degeled within three months.
- Reading and writing antennas in polarizing directions is not considered.If the label and the reader antenna are polarized vertically, the reading distance may be reduced by more than half.
And finally, a simple order of judgment:• Confirm metal types and working temperature;Shanghai-based Cheeky Way Technologies has seen many clients skip the middle steps of direct bulk purchases, and one third of them have a bad reading distance after they have labeled it, and then they return to work. It is more realistic to keep this sequence steady than to pursue a single parameter ' s limit.

Ms. Lei
Mr. Pang