RFID Common Fragmentary Checking of Soft Tags: Weak Signals, Easy to Drop?
RFID Knowledge

RFID Common Fragmentary Checking of Soft Tags: Weak Signals, Easy to Drop?

PublishedShanghai Zejie Smart Technology Co., Ltd.

RFID Common Fault Scatter: Weak and Easy to Drop? Solutions summary I. Signal Fault: A full check from the environment to label

Weak signals are the most common problem with flexible RFID tags, usually due to interference, tag suitability, or installation. If signals are heavily attenuated near metal shelving or stored liquids, switch to flexible tags designed for metal or liquids. Antennas such as inverted-F designs reduce metal reflections and liquid absorption, increasing range from 0.5 m to over 2 m. If some tags do not respond in bulk reads, check that the reader matches the tags: UHF operates at 860–960 MHz, and HF at 13.56 MHz. Do not stack tags, and keep at least 5 cm between them.

II. ELECTRONIC ISSUES: THE COMPLETE BETWEEN THE BASE AND THE PLACE-PUTTING METHODOLOGY

The failure is due to inappropriate selection of the base material or irregularity in the past. For soft surfaces such as clothing, bags, a soft label for acrylic-sensitive rubber-based materials should be selected, and before pasting should be preceded by cleaning of objects ' surface oil, dust, 30 seconds to ensure that the layer is... bound up, with an investment of 60%; for wet spots like fresh, frozen foods, water-resistant smelting labels should be used to keep it steady in -20°C environment. If the label is used for recyclable packaging, you can choose to remove silicone-based materials that avoids fallout and is easily reused, and reduces material waste.

In addition to signal problems and tags coming loose, users may see duplicate reads or lost data. For duplicate reads, reduce reader power by 10%–15% and enable the anticollision algorithm. Data loss is often due to chip damage. Enable dual backups when storing critical data. Avoid prolonged exposure to strong magnetic fields, such as near microwave ovens or large motors, and use dedicated test equipment to spot-check tag performance regularly and identify potential failures early.