RFID Desktop Reader's Common Fault Scatter: What about failure to read and interrupt?
In daily use, RFID desktop readers may experience failure of reading and communication failures that affect business processes. The correct way to sort out is to reduce the time spent on trouble management, as follows:
Read failed failure screen: The failure to read is caused mostly by hardware, labels or environmental factors. ... Checks whether the reading writer antenna connection is loose and the antenna break or exposure is bad will significantly reduce signal strength; secondly, confirm that the label is damaged and may be damaged or lost if the new label is readable by replacing the new tag test, and if it is properly readable, then the original label may have problems with chip damage or data loss; furthermore, no environmental disturbance should be overlooked, as metal objects, powerful electromagnetic fields can interfere with radio frequency signals and try to retest the reader after it has been removed from the source of interference.
Communication failure resolution: When communication is interrupted, check the device connection line to ensure that interfaces such as USB, serials are secure and if the interface is normal, see if the device drive is installed or needs updating. You can access the device manager, check the reader driver state, and try to re-install the driver if an exclamation sign appears. If the driver is normal, you need to sort out software configuration problems, confirm whether the communication protocol (e.g. Modbus, TCP/IP) matches the reader settings, port numbers, Porter rates, etc.
Other potential problems are addressed: if the reader is frequently dead or is running in Cardon, it may be overheating or insufficient memory. Checks can be made to see whether the vent is blocked, dust clean and ventilation maintained; and to release system resources by closing unnecessary backstage programs. In addition, fixed-up improvements to the reader are regularly performed to repair known gaps and improve equipment stability.
These routing techniques are effective for the RFID desktop readers, which often fail to function efficiently and reduce transport costs.

Ms. Lei
Mr. Pang