How do we solve the common malfunctions of RFID UHF handheld? Weak signals, fail-reading techniques?
RFID Knowledge

How do we solve the common malfunctions of RFID UHF handheld? Weak signals, fail-reading techniques?

PublishedShanghai Zejie Smart Technology Co., Ltd.

When a RFID UHF handheld is in the process of signal weakness... check the antenna status of the device. An antenna, as a key component of signal transmission, may weaken if it is damaged or poorly exposed. Therefore, it is necessary to look carefully at whether the antenna connection is secure and there is significant physical damage. If both the antenna looks and links are normal, try to adjust the angles and distances between the handle and the label. In different settings, the perspective of the label identification may differ, perhaps by adjusting the position over time, and perhaps find the location to read it.

At the same time, you should be aware of any powerful sources of interference around you. Strong sources such as large metal objects and other wireless devices may affect the transmission of RFID signals. Therefore, as far as possible, equipment should be removed from these sources to reduce its impact on the signal. If reading fails after this adjustment, then it is necessary to confirm whether the label works properly. Testing can be done using other devices to read the same labels, and if other devices are able to read them normally, the problem may arise on handhelds.

If the labels fail to read on other devices, then they need to check if the labels themselves fail. After confirming that the tags are normal, it may be that the handheld reading and writing module is malfunctioning. At this point, you can try to restart the device, get the system to re-initiate the reading and writing module, which sometimes solves some of the temporary software problems. If restarting is not working, then you have to check further the software settings. Parameter setting errors, such as frequency band setting, reading and writing permission settings, may also lead to failure. Therefore, you need to check the settings in the software carefully to make sure they are correct.