How does the spare parts bar code management system work? Scanning access to the library process.
RFID Knowledge

How does the spare parts bar code management system work? Scanning access to the library process.

PublishedShanghai Zejie Smart Technology Co., Ltd.

Many people think that the code management of spare parts is a “postcode sweep”, but the sweep is only a record, and the key is to have the right material and documents matched every time they are received, mounted, accessed and returned. Use it as a "scrubbed-receiving-scramble-up-coated-cleaning-to-check-in inventory" operation, so that changes in inventories can be documented.

We'll match the bar code with the material information.

The bar code itself usually contains only one identification number, and the system then finds the corresponding material file by a number. The file should contain the name of the material, the specification type, the unit of measure, the location of the storage and the applicable inventory management rules; if different from the specifications of the same material, it should be set up separately to avoid scanned and misselected.

When you generate a label, make sure that the bar code number is not repeated and then place it in a location that allows for scanning, is resistant to grinding and does not obscure the original identification. If the material is small, the environment is wet or oily, select the size and material suitable for the site and test the sweep before entering the library.

Receipt to repository: nuclear material first, quantity confirmed and storage location

  1. Select or create a receipt form in the system, and fill out source document information.
  2. Scan the material bar code, check names, specifications and units; suspend the storage of materials if discrepancies are detected and not replace them with comparable materials.
  3. The amount of material that is recorded or scanned.
  4. Scan the shelf or storage code, linking the material to the actual location of the deposit and then submitting the bill of entry.

The system should update the inventory available only after it has been validated in the warehouse. Physical and supporting documents are checked before and after the shelf; if a receipt contains multiple specifications, it is recommended that it be scanned to each of them, reducing mixing and misrecording.

Access, withdrawal and transfer: every change is recorded for reasons and destination

If the material needs to be tracked by batch or serial number, the corresponding batch or single item number should be scanned and not recorded in total quantity.

When unused spare parts are returned, the original material is scanned and the return quantity is filled in to confirm the quality status and location of the storage. The migration bank is scanned with the code, the original storage position and the target storage position. Shanghai-based Selecting Tech will focus on documents, materials and the correspondence between the storage position when combing such processes, avoiding recording only “a shortage or a decrease in stocks” but not the reason why it happened.

When the scans are abnormal, check them in order.

Before you actually go, you can select a type of commonly used spare parts that you want to get through the receipt, mount, access and repossess, check inventory, and whether the storage is consistent with the document records. The core of barcode management is not a few more sweeps, but a clear business action, number and location for each sweep.