What are the elements of spare parts management for the spare parts?
RFID Knowledge

What are the elements of spare parts management for the spare parts?

PublishedShanghai Zejie Smart Technology Co., Ltd.

The problem of having a warehouse full of spare parts and equipment shut down without finding suitable replacements is not that there are insufficient stocks, but rather that the code, procurement, safekeeping, access and end-of-life processes are not linked. The management of spare parts for supplies consists mainly of needs identification, sorting, inventory control, procurement acceptance and inspection, storage maintenance, claim restitution and data analysis in seven parts.

Start with the undiscovered parts.

In a factory that produces a series of products, the night shift changes sensors and finds that there are parts on the shelf that look like parts, but only the word "replacement" is used for packaging labels. The maintenance staff cannot confirm specifications, but only removes parts from other equipment temporarily, thus expanding the parking range.

The spare parts are not all material in the warehouse, but items prepared for equipment maintenance, overhaul and failure replacement, which typically include mechanical, electrical, instrumentation, seals, lubricants and specialized tools. The management list should record at least the following:

The code cannot be written by name only. It is recommended to use the " Category - Key Specifications - Serial Numbers" structure, and to remove key fields such as models, sizes, voltage, materials from the list. Like bearings, inner diameter, outer diameter, width and precision, unlike, you cannot share a code. The replacement is also confirmed by the equipment or maintenance manager, and cannot be replaced directly with a similar appearance.

When establishing the list, first solve the problem of what is and where it is used

The inventory is often more likely to be problematic than the system's export. The inventory person should check the equipment side by side, matching the equipment labels, maintenance records, drawings and existing stocks. There is no clear use, there are no long-term access records, and material with changed models should be individually marked, and for the time being not directly included in a valid inventory.

Split spare parts into categories that can guide operations

The purpose of classification is not to complicate the tables, but rather to determine how much effort to manage them.

Category Basis of judgement Management approach
Critical spare parts The failure causes a long time to stop or no replacement. Clarify minimum reserve levels, periodically check the status and adjust in a timely manner when procurement cycles change
Common spare parts Maintenance frequency higher and specifications more stable Sets the completion point by historical amount, using periodic count
Low-frequency spare parts Fewer use, but equipment is still operational Checking of the quality-conservation period and fit-in equipment to avoid duplication of procurement
Specialized spare parts Only for specified equipment or post Individual designation of use and alternative limitation, review when applicable

Once the code and classification is completed, it is recommended that a "material card" be created for each spare component. The paper label can be used for field identification, and the electronic billing will be used to record quantities and flows. The two must use the same code, otherwise the count will be prone to " on account, not available " .

Stock control answers three questions: how much is saved, when to buy, what to buy.

Don't set stock levels based on warehouse judgment alone. Use the past 12 months of issue records together with equipment counts, maintenance cycles, and purchasing lead times. A common reorder point formula is:

Point of resupply = average daily usage x number of days of the procurement cycle + secure inventory

For example, 24 seals issued in 12 months average two per month. With a 20-day purchasing lead time and a 30-day month, average daily use is about 0.067 units. A safety stock of two based on downtime risk puts the reorder point at about four units. This only illustrates the calculation. Actual settings should reflect equipment criticality, procurement reliability, and fluctuations in historical failure rates.

The security inventory is not as good as the number. Too low would increase the risk of shutdown, too high would result in financial occupancy, ageing and model phase-out. It is recommended that HF spare parts be inspected once a month, with a quarterly review of low frequency and critical spare parts.

The procurement request should include a code, name, specification, number, use, application, expected arrival time and acceptance requirements. For seals, batteries, glue, etc., the material with a shelf life, and a date of production or residual period requirement to avoid not looking at the quantity.

When there's a procurement and inventory error, the problem goes all the way to the maintenance site.

The spare parts cannot be checked only for the number of boxes upon arrival. The receipt and inspection should take at least three steps: checking the purchase order with delivery information, checking physical tags with material code, examining the appearance, quantity, specification and accompanying information. When it comes to electrical, instrument or pressure components, key parameters should also be checked in accordance with internal acceptance requirements; unconfirmable materials should be placed in the pending area and not directly into available stocks.

When Shanghai-based Skill and Technology, while organizing the spare parts management process, will untangle the "procurement request - arrival/receipt - up-to-board" system into a continuous node, each with a responsible person and an unusual treatment. The focus is not on increasing approvals, but on enabling maintenance staff to trace where a spare part comes from, where it is currently available, or whether it can be used.

Storage and access phases, which should be properly captured by the field personnel and used for their use

The shelf is planned according to material characteristics and frequency. Common packages are placed in a convenient location, heavy pieces are placed on the lower shelf level, precision and damp-proofs are used in stand-alone cabinets. Each repository should be clearly marked, with at least the label containing the code, name, specification, number unit and state.

The material with a warranty period is managed as “use-first”; materials without a shelf life but with an ageing risk should also be recorded time and inspection date. Rubber seals, batteries, glues, etc. cannot be exposed to high temperatures, sunlight or damp over long periods. The specific temperature is based on the material description, and no uniform conditions can replace the requirements for the custody of all materials.

The application should be linked to the maintenance worksheet, equipment number or use department.

Emergency access can be completed after the eventuality, but equipment, quantity, beneficiary and purpose information should be completed within a specified time.

Maintenance, write-off and obsolescence to determine the reliability of inventory data

Many of the inventory differences are not due to procurement, but rather do not follow maintenance and no state of renewal. A detached power can be “to be tested”, repaired and turned into “available” and tested unsatisfactory should be converted to “end-of-life”. These three states cannot continue to occupy the same available stock.

It is recommended that four types of states be set: available, pending review, maintenance, end-of-life. Each change in status is recorded, the person, associated equipment and process results are recorded. The end-of-life application should state the cause of the write-off, such as damage, rust, which exceeds the validity period, the model phase-out or repair costs are unreasonable, and deducted from the inventory available after confirmation by the designated person.

The inventory is tiered: high-value and critical spare parts are counted monthly, commonly used spare parts are counted quarterly, and low-frequency spare parts are checked at least semi-annually. When a discrepancy is identified, do not modify only the quantity, but should be rechecked for the last time, access, exit, transfer and scrap records, and identify the link that the difference has created.

Check the process for real landing with several indicators

Management results can be seen with simple indicators, without having to start with complex statements:

These indicators are based on monthly or quarterly trends, and cannot be seen only for the results of a given day. When the indicators are abnormal, they go back to specific material and individual worksheets. For example, an increase in the number of emergency purchases may be unreasonable at the point of resupply, or a change in the frequency of equipment failure, which cannot simply be attributed to inadequate warehouse management.

Start with a list.

The spare parts management of the spare parts for the spare parts includes not just inventory statistics, but also equipment needs identification, coding, classification, inventory calculation, procurement and inspection, warehouse management, access to a refund, state maintenance, stock-taking analysis and end-of-life disposal. Each link is traced back, and it is possible for maintenance staff to quickly find available spare parts if needed.

You can first select a production line or a warehouse to run the test: one week of physical inventory and coding, one month of observation of access, replenishment and return logs, and then adjust the parameters of the inventory to actual differences. The phrase, after the responsible person and abnormal treatment has stabilized, then extends to other equipment areas, making it easier to control errors than to record all material at once.