How will the tracking of spare parts use be achieved? Consumption data collection
The key to tracking the use of spare parts for spare parts is linking the receipt, installation, return, maintenance and end-of-life records to the same material and corresponding equipment and collecting quantities, times, people and uses in a timely manner.
What information is required to record in the tracking of spare parts for spare parts?
Each time an inventory changes occurs, you should leave information that answers "what material, when, where, by whom, how much quantity". It is recommended to record the material code, name and specification, batch or serial number, change type, quantity, time, recipient, equipment number, work list and handler. For maintenance items, also record time for removal, failure, repair results and re-entry times.
The management units are also required to harmonize: materials managed as “packages”, out-of-stock and out-of-desk; material measured as rice, litres etc., is subject to the minimum unit of measure and conversion rules. Otherwise, the same material may not be accounted for in terms of the amount of the item that is not consistent with the actual inventory.
How can consumption data be collected?
Common methods include a sweep of the code, and a manual receipt and equipment system interface. The scan is suitable for the warehouse to release, take over and return: Set bar codes for material or cargo positions, select numbers after the operator scans, equipment and uses. The worksheets link spare parts consumption to maintenance tasks, allowing for separation between planned repairs and failure recovery. If the field equipment system provides replacement records, then the data can be imported into the inventory under a uniform code.
When Shanghai Selecting Tech Ltd. combes such operations, it will first specify the material code, the rules for the change of stock type and equipment, and then determine which line to collect data at. This is not about adding entry items, but rather making access, installation, return, etc. records using consistent fields, and reducing subsequent manual replenishments.
How do we reconcile the data and find abnormal consumption?
The records can be checked daily or shift-by-shift with the inventory flow, and monthly aggregate material consumption, number of usages, number of refunds, and turnover of maintenance units. When a “deposit has been made, no matching list” is found to have been returned but not increased” or the same equipment is duplicated for the short term, the original records should be reviewed to confirm whether the entries were missing, unit errors or that the equipment was re-incurred.
Where do we start with tracking processes?
Select a type of spare parts that is used frequently and affects maintenance progress, to be tested, to harmonize the code and unit of measure; then set the number of access points, installation, return, maintenance, end-of-life records; and finally verify the consistency of accounts with inventory count results. The process is stable and then extends to other materials. The collection method can be improved gradually, but each change can relate to material, quantity, equipment and uses, which is the basis on which consumption data can be used.

Ms. Lei
Mr. Pang