How is the spare parts management system for production prepared? Production access and consumption
RFID Knowledge

How is the spare parts management system for production prepared? Production access and consumption

PublishedShanghai Zejie Smart Technology Co., Ltd.

The system of spare parts for production is linked to the receipt, installation, storage and consumption records: documents are issued, use is retroactive, returns are not used up in time, and discrepancies between accounts are checked regularly.

Incomplete access record: first, write "Who's the lead and why"

When the system is on the ground, it is not a matter of having a receipt, but rather of writing only the name and quantity of the material, without equipment, worksheets or cause of the failure.

The application must contain, at a minimum, material code and name, specifications model, number of persons, recipient, time taken, use of equipment or worksheets, use of applications, and approval. Emergency repairs may be requested as authorized, but the reasons and documents should be recorded within the prescribed time frame; this period is set by the enterprise in conjunction with its management capacity and is included in the system. For high value, spare parts for critical equipment can be reviewed by the maintenance manager or equipment manager.

Shanghai-based Technology Ltd., while combing the spare parts management process, separates "storage sending" from "production actual use" and avoids direct consumption of the amount received. The system is to clear fields and responsible positions so that the follow-up checks can be justified.

Recovery does not equal consumption: replace installation, storage and scrap

If you do not record the inventory, the inventory will also be de-false.

The system should identify the treatment of each direction: The actual quantities used and corresponding equipment are recorded; if not used and packaged, markings and condition are met, the storage is discharged and the access is flushed; damage, expired or unfit for continued use, approved by the end-of-life or quality anomaly process, the cause of the record and the outcome of the disposal.

For example, if three filter elements are issued against a repair order, record that two were installed and one returned to stock after the job. Make it possible to cross-check the work order, material issue slip, and inventory records. Procedures should also specify who enters the information and who reviews it, so warehouse staff do not have to guess where parts went after the fact.

End-of-month accounts not matched: risk-set inventory and discrepancy processing

If the books show five units but only four are on the shelf, don't just change the number to four. Check recent receipts, issues, returns, transfers, and write-offs, determine the cause, and approve the adjustment under the applicable authority.

The system can arrange an inventory by material value, criticality and consumption frequency: Increased frequency of reconciliation of key or high-value spare parts, with the usual low-risk materials being included in the periodic inventory. The specific cycle should be based on stock size, equipment shutdown risk and staffing, and it is not appropriate to carry fixed numbers. Each inventory count recorder, reviewers, book number, actual count, cause of variance and processing approvals, which provides a basis for retroactive adjustments.

The system is designed to include the duties of warehouses, production teams, equipment maintenance and finance positions, as well as super-planned access, emergency access, loan, inter-departmental allocation approval paths. Each month, a total amount of access can be aggregated, actual consumption, refunds and scrapes, checking for abnormal fluctuations; if there are successive discrepancies or unusual rates of refunds for certain types of spare parts, then the site should be back to the coding, the process and the safekeeping position.

Pilot from a worksheet: to make the system operational, to be revised

The first draft of the system does not have to cover all details at once. One type of maintenance task can be selected, from application, approval, material to installation, inventory and inventory, check whether the table field is adequate, if the job transfer is clear, and if there are any procedures for dealing with anomalies. The trial found that night work orders were difficult or old items were missing, so the process was adjusted accordingly and then extended to other spare parts categories.

An enforceable spare parts management system, with the core being that each application is used for a purpose, every consumption is supported, every inventory and end-of-life is documented, and every stock adjustment is approved. First, documents and responsibilities are established, then the process is revised on an ongoing basis using the results of the inventory to gradually reduce inventory discrepancies and to allow for documented maintenance consumption.