How do you count fixed asset counts? Scanning and discrepancy-processing steps
RFID Knowledge

How do you count fixed asset counts? Scanning and discrepancy-processing steps

PublishedShanghai Zejie Smart Technology Co., Ltd.

Many people think that the fixed asset count is just a few people who can count the equipment with a form at year's end, but it's only a superficial move. The full inventory has three questions: whether there are physical items on the books, whether there are any physical accounts, whether the status and use of the person has changed. Answering these three questions clearly, not by eye, but by a complete set of actions from preparation to field sweep, to differential processing and accounting adjustments. It is only by being proficient in terms of tools that you can really match "book numbers" and "physical numbers."

Why can't you just take a watch and count it?

Take a printed list of assets to the warehouse and workshop, which often comes in three places. First, the asset code is put on the back of the machine or is covered, and it's only half that one missing; second, the assets on the book are either dead or sold, but the bill is not updated, and the count is always incorrect, and the inventory is suspicious; third, there is no drawing computer on site, who can be identified on the spot with the physical object for which the asset code is, when to account, who uses it, just remember "see a machine", and then go back to the account and rechecking, which is inefficient.

Shanghai-based Cheeky Way Technologies, in its asset inventory project for manufacturing companies, found that the largest pit before the inventory was not slow on site, but rather did not match the billing and physical items at first. We usually recommend that clients make a round of precalculations to minimize differences in the accounts, so that they can move forward efficiently.

What are we gonna do before we count?

The preparation is generally conducted in three steps, each with a clear output and not a process.

Step 1: Clean Up the Asset Register

The list of fixed assets is shown from the financial system, the specification type, entry date, original value, accumulated depreciation, place of deposit, use and current user. Disused, those who have applied for disposal but have not yet completed the process, are individually marked, without "recovered" being included in the inventory. This usually takes 2 to 3 working days depending on the size of the asset and the level of cleanness of the account.

Step 2: Prepare the Site

Tag every physical asset. Metal nameplates or waterproof QR code tags both work. Place them on the front, left side, or top of machines, not on feet, undersides, or obstructed surfaces. Use codes that match the finance register so a scan opens the asset record directly. Notify departments a week ahead so users know not to move assets unnecessarily before the count.

Step 3: Assemble the Inventory Team

Normally, a handheld terminal with 1 sweeper function for each group of 3 to 5 persons is set up. The team should be divided into two groups: one for the coded registration and one for the location of assets on the plan. If the asset exceeds 1,000 items, it is recommended that an inventory area be divided by workshop, department or floor, one unit per group, avoiding repetition or leakage.

How do we operate the coded number?

The core of the site sweep is not "sweep" but to confirm the asset's status at the terminal as soon as it's finished.

  1. The inventory person goes to the asset, opens the handheld terminal's inventory application and scans the two-dimensional code on the physical label;
  2. (a) The automatic release of asset cards showing the name, specifications, location, user and status of the asset (in use/inactivity/pending repair);
  3. The inventoryer checked on-site whether the physical was consistent with the card information, updating current users and location;
  4. (a) Click "completed" after confirming that the asset is in normal condition, and automatically record the time of the inventory, the person to take it, the coordinates of the location (if a position is opened);
  5. If the cipher is found to be inconvenient with the information and material, the photo is taken and the "discretion registration" is selected for subsequent integration.

Each asset is a 1 to 2 minute, from the sweep until it is confirmed. If a machine has to be verified for a long time, it is often an unreasonable plan of a field sweep line or the machine's account information is per se in disarray, requiring that the difference be marked on the spot and then specifically processed back.

The progress of the entire inventory can be seen in real time from behind: how many items have been counted, how many have not been counted, how many different items are done by department as a percentage. It is recommended that progress be synchronized in groups every 2 hours to avoid a group speed, group slow, and then concentrate on a work point to fill in.

What about uncleaned assets?

Two problems will come up when scanning on site: no scan (you cannot find the QR code for the physical item) and a wrong scan (the asset record displayed after scanning does not match the item). These require different responses.

Uncleaned

Do not write "discount" for the first time. Make sure that the assets are actually in this inventory area. The common reason is: they're scrapped but not processed, or they were transferred to another department last month without an update. After the first round of inventory, all unscathed assets are consolidated into a list, by department, by workshop, by floor. The second round is not available, and then the process is broken down.

The card doesn't match the scan.

Take the live photo and record three messages: the actual asset name, the specification model, the current user. If the physical item is not on the billboard, that is, "extra-account assets", you have to register a single card, indicating the location of the discovery, approximate time of purchase, current status, waiting for subsequent retrofitting of the asset card. If it has an item in the account but the object is wrong, the code is wrong, the error information is displayed directly when the number is scanned, the counter is wrong about the physical coding, and the tie between the asset and the code is automatically updated.

All discrepancies do not recommend direct changes to the desk accounts on site. Only records and photographs are made at the site, where differences are processed in a single chain of uniform reviews, so that data is not confused by repeated changes during the inventory.

Discrepancies and accounting adjustments after inventory

After the on-site inventory, the discrepancy data will be processed within 5 working days or delayed until the next month.

After the entire process of processing differences, a complete list of assets is regenerated, and the fixed asset account-by-account reconciliation on the financial books. This step is the test for whether the inventory count was really successful, not that it was done, but that the balance was zero.

Some of the more energy-saving habits of next time.

Many companies consider the inventory as a yearly temporary task, and when they end up in a state of chaos, they start over the following year. To break the cycle, three things are recommended for daily use:

  1. (b) Update the card in the system in real time when assets are added, redeployed or scrapped and do not save it for the end of the month;
  2. (a) A small-scale draw, which is done quarterly and is drawn between 10 and 20 per cent at a time by department or floor, in time for the actual discrepancies to be detected;
  3. Physical tags are regularly inspected and the resulting vague and timely subsidies are found to prevent the next count from being swept.

The nature of the fixed asset count is not "counting equipment" but to keep book data and physical status consistent. This is not possible by a one-time, centralized operation, which must be supported by a standardized inventory process that is maintained on a daily basis. Full readiness, field sweeps are done, differences are processed in a timely manner, and these three things are in place, a full inventory can normally be completed within 3 to 5 working days, and the difference in accounts can be contained within 1 per cent.