What are the functions of mobile asset management software? Scanning and offline capability
The core value of mobile asset management software is to have asset data recorded and searched in a timely manner on the site. Two key capabilities are sweep operations, which raise the efficiency of entry to one level, and offline capacity, which ensures that no network warehouse, plant area, outdoor scenes can work. It's worth judging whether a system is worth using, first looking at whether these two pieces actually do it, then looking at the surrounding function.
Let's just take the core function apart and not be fooled by big, big.
A land-based mobile asset management system, which typically contains the following modules:
- Asset register:(c) The entry of basic information such as asset numbering, name, specification, location, department or office to which the responsible person belongs, and support for bulk import and splicing.
- Scanning disc points:Use a scanner or phone camera to identify asset barcodes, QR codes, or RFID tags for faster inventory counts.
- Access and restitution:The staff member was identified by the code at the time of taking over the assets and again, upon return, the ring was closed.
- Redeployment and transfer:Cross-sectional, cross-location transfer of assets with a clear code to update the attribution and location.
- Repairs and end-of-life:The maintenance worksheets, the costs, the causes of end-of-life are recorded and complete asset life cycle files are developed.
- Statement and depreciation:Automatically generate an asset desk account, a statement of discrepancies and a monthly or annual depreciation breakdown.
The function looks like the same, the difference is in detail. For example, it's also a count, some systems can only be numbered, some can be screened by department, by location, by batch of users; others support sweeps, and some recognize only one-dimensional bar codes, some can identify two-dimensional code and RFID at the same time.
Scanning is not a matter of saving a frame.
The actual proceeds of the sweeps are three-tier:First level is efficiency.A typical asset ID is a dozen or more characters long. Typing it takes about 10 seconds, compared with less than 1 second for a scan. The gap adds up when counting hundreds of assets;The second level is data accuracy.— Hand-to-hand is prone to errors, especially in the number of closes, and the error of the disk during the count is directly reflected on the books, the scrutinizing is a machine identification and the error is a problem of the label itself and can be traced back;The third level is the process closed.— The taking of the, return, transfer and maintenance of these movements is only true at the moment when the sweeps are made, and it is easy to "unregistered" a person fill out a file.
We've met a customer who was a leaser of equipment, which used to be managed by Excel and took days to reconcile. After the scrutinizing, the count improved significantly, and it was important that there was no longer an old problem of "inconsistent" with the balance.
The sweep chain has several common configurations: continuous scanning mode (no repeated confirmation at the time of inventory count), scrutinizing vibration feedback (in the noise workshop, it is known whether or not a sweep was successful) and a defaced tagging scheme (manual input or photo identification).
Offline capability is an undervalued hard demand.
Many people think that the office area is Wi-Fi, and the storage and factory areas are the real test. We have encountered several typical scenarios: large warehouse hangers, Wi-Fi signals are inert, and 4Gs are sometimes absent; outdoor operations such as electrical equipment, municipal facilities, access to sites is virtually non-signable; there are a lot of metal equipment in factories, which interferes with wireless signals.
In these scenes, when the system goes off the Internet, employees take notes and go back to the office to re-record them.
The real offline mode is available for three things: first, local cache of complete asset data, including numbering, name, location, current state, even if the net is disconnected, the query function cannot be affected; second, local preservation of all new and modified operations records, queued in chronological order, until the network is back up and upload; third, conflict detection mechanisms, where the same asset has been modified by two people, and the system will be able to identify and prompt when it comes back online, avoiding subsequent overlaying of previously transmitted data.
Shanghai Picket Technologies Ltd. usually uses this offline cache program for projects involving non-signal scenarios like underground cold storage, outdoor power facilities, etc. The staff are in the freezer or on site to synchronize data at the door, and all operations are properly coded and registered, then upload them back together, and there are no break points.
Data synchronisation is not "online."
The offline model is not good. It's a synchronous strategy.Sync in Real TimeEach operation is uploaded immediately and suitable for a stable web scene, but the network is stuck as soon as it is shaken;TimeSync(a) Mass upload every few minutes, balancing real-time and stability;Manual SyncBy requiring "Sync" buttons, the user is suited to a situation where data are high or network costs are high.
In practice, we recommend "smart sync" in the form of a real-time sync on Wi-Fi, 4G/5G and lined up on line. Sync failed with a retry mechanism, three failed alarms, and no useless errors in the logbook.
The logic of dealing with synchronized conflicts is to be thought out in advance. Whether it will pass later, or if the pop-up interface will allow for manual confirmation? We prefer the latter because asset data are costly and can take a few more seconds to get the operator to confirm it, rather than cover it quietly.
Leave a mark on the access and operation, and we'll have to wait until we get back to work.
Asset data refer to the amount and responsibility, and the privileges cannot be designed in such a way as to be easy. It is recommended that at least: role-assigned authority, ordinary staff can only receive access and query, asset managers can add and modify, finance can be used for end-of-life and depreciation; key operations record operators, time, back-to-back values, access, transfer, end-of-life, change amounts must have complete logs; sensitive fields are controlled by themselves, such as procurement prices, depreciation methods, and only specified roles can be viewed and modified.
The value of the operating logs is only real when problems arise. An asset is lost, who gets it, when and what's in it, and you can find out for seconds.
The type and the easy-to-penetrate pits.
The common issues summarized after several projects have been re-opened:Device selection is inconsistent(b) Some projects have a specialized slicing machine gun, others have a common mobile phone, with significantly different speed and recognition rates, preferably uniform models, or training and maintenance are complicated;The label material was not selected correctly.In the warehouse, hot and wet, normal paper labels are worn for months, and high temperature, corrosive, water-washed labels are selected according to the scene;Underestimating the difficulty of data migration(b) The old system is replaced by a new one, the historical asset data entry is the most problematic link, and the numbering format is not uniform, fields are not matchable and photographs are missing, and all require pre-recording;Staff conflictThe clean-up inventory changed the working habits, training was introduced without being in place and vulnerable to negative responses. It was suggested that a sector pilot be selected and then fully rolled out.
Proposal for action: validation from a small scene
If such systems are being evaluated, it is recommended that they be moved in this order: first, a clear link of pain points, such as monthly count, proofing of sweep and offline capacity; then run through and then extend to the acquisition, transfer, maintenance and final take-over of the finance and depreciation modules.
Test three things when choosing a system: whether scanning, registration, and lookup work offline; whether sync is reliable and lossless when reconnected; and whether the permissions and logs meet your needs. Deliberately disconnecting the demo from the network tells you more than a hundred slides.

Ms. Lei
Mr. Pang