What are the functions of the RFID asset management system software?
Many people think that RFID asset management is a label for equipment, which in fact is a system from hardware identification, data capture to business-business closed loops. It can be less detoured by understanding its functional boundaries and comparing different manufacturers’ programmes.
What exactly does RFID asset management care about?
A simple interpretation of RFID asset management as "labeling and scanning" is a fairly common error. A system that can really run, contains at least five parts: electronic tags (on assets), readers (launching radio-frequency signals to read and write), antennas (magnification and orientation signals), intermediates (translating hardware from data into software information) and software platforms (presenting data, running business processes).
The RFID principle is not complicated: the reader sends a radio wave at a specific frequency, and the antenna in the label receives energy, re-reflecting the stored code information. It does not need to be aligned with light, compared to barcodes, to read dozens or even hundreds of labels at once, which is the underlying reason that it can be used for a mass count.
Core functionality dismantling — what a qualified system should have
The product functions of different manufacturers appear to be obscurantistic, but they are untraceable and stabilize the functions that meet asset management needs, with a general concentration on the following:
- Asset register and code: Allocating unique codes to each asset, entering information on name, model, date of purchase, department, etc. The code rules generally follow the EPC (electronic product code) standard and ensure that it is the only one in the world.
- AutoCrasis: The system automatically takes all assets in the range and is running a full-scale inventory of the terminal at a time-block in a warehouse or office, which is dozens of times faster than manual.
- Location tracking and moving trajectory: A fixed reader is placed at key access points and areas to keep track of changes in the location of assets and to create a moving trajectory.
- Access to and from the library and change of status:: Asset acquisition, return, transfer and end-of-life, with every step being marked in the system to be fully documented in conjunction with the approval process.
- Early warning and protection alerts: The system automatically sends a reminder when the asset is close to depreciation, the security matures and it remains unmoved for long periods.
- Data statements and decision supportData on asset utilization, idleness and depreciation distribution are visualized to support management in procurement and redeployment decisions.
Selective comparison -- what dimensions are critical?
After the list of functions is completed, the real difference is in how it is achieved and in the experience of long-term use.
Deployment structure
B/S structures (browsers access) are easily deployed, upgraded to simple, multi-branch; C/S structures (client software) respond more quickly, are more friendly to the Intranet environment, but maintain them at a higher cost. Public cloud deployment is less costly than data security; privatization deployment is highly manageable and requires support from its own IT team.
Read-and-write device combination
The common configuration is the combination of "fixed readers + handheld terminals": fixed readers are placed at the entrance and exit to make automatic access libraries, and handheld terminals are used for periodic inventory counts. If assets are not liquid, a pure fixed solution can be handled; if mobile operations are needed, handheld terminals are almost essential.
Label Type Match
UHF, 860-960 MHz read distance (up to a few metres to ten metres), multiple labels for one reading, suitable for warehouses and large equipment; HF, 13.56 MHz, short range but strong metal-resistant, suitable for small precision equipment. The metal or liquid environment requires special metal resistant labels, which can be higher.
Interface and integration capacity
Whether or not to connect to ERP, finance software, OA determines whether data can be transferred. Watch the interfaces with care: whether standard API (programme interface) is provided, whether mainstream databases are supported and if there are ready-made matching cases.
It's a pit that can get down.
The following are some of the more typical scenarios in the implementation of RFID asset management in various industries:
Metal cabinets and liquid containers sharply weaken RF signals, so ordinary UHF tags may be unreadable on them. Use on-metal tags or change placement, typically by applying them to a nonmetal surface or adding a foam spacer.
There is an agreement compatibility problem between the reader and labels of different manufacturers, with as much as possible ensuring that hardware is obtained from the same manufacturer or tested for compatibility, otherwise spare parts are easily contained in later replacement.
More features do not make software easier to use. Some systems have an extensive feature list but take seven or eight clicks to complete a stocktake workflow. A simpler system with a smooth workflow can be more popular. During selection, ask the vendor to demonstrate an entire workflow rather than relying on a product brochure.
Selective advice - take these steps more securely
The first step is to clarify what type of assets they have, where they are distributed and where they require real-time performance. This step directly determines the direction of the later hardware and software configurations.
Second, shortlist two or three suppliers for small pilots to test functionality and stability in real conditions. Two to four weeks is usually enough to cover typical workflows, including receiving, shipping, daily counts, and exception handling.
The third step concerns long-term transportation costs. Software authorization fees, hardware wear and tear, tagting costs, and later upgrade services are included in the general ledger and cannot be based solely on the procurement offer.
As a long-term team that has been working on the fall of RFID technology, Shanghai-based Cheeky Way Technologies found in many industries that it is not often the function of the system to really decide whether or not it works, but rather whether business processes and software design fit into actual operating habits. Think about this, then make an opting-out comparison, and it's more bottom line.

Ms. Lei
Mr. Pang