How does the RFID asset inventory system work? functionality and workflow
The RFID asset inventory system can be summarized as: the RFID tags are tied to assets, an asset desk account is created, a handheld or fixed-reading device batch recognition is used, and the results of the inventory are compared with the system's book data. The complete process usually includes tag slotting, task-out, site scanning, discrepancy confirmation, outcome audit and statement retention.
What are the main components of the RFID asset inventory system?
The system is usually composed of RFID labels, reading and writing devices, inventory software and asset databases. RFID tags are placed on equipment, tools, instruments or working capital, where the asset number is kept; the reader is responsible for sending wireless signals and receiving data returned from the labels; the inventory software is responsible for matching the asset information, recording the location and status of the asset, and generating a difference.
There are two types of common equipment:
- Handheld CD terminal:Suitable for warehouses, offices, rooms and production sites, staff members may walk-scan and view the name, number and count of assets on screen.
- Fixed-forming equipment:For access, access or a particular area, the automatic collection of information when the asset is read and written in a range is appropriate for the scene where access needs to be recorded on an ongoing basis.
The label is selected in combination with the material of the asset and the environment. Metal equipment usually requires anti-metal labels, liquids, dense stacking or high temperature environments, which require on-site testing. When using UHF RFID, reference can be made to the range of the 860-960 MHz air interface specified by ISO/IEC 18000-63:2015, but in the actual frequency band, the launch power and equipment configuration should still meet the requirements for radio management at the location.
What basic data are required before use?
The inventory must be preceded by the master data of the asset, at least including the asset number, the name of the asset, the specification type, the use department, the responsible person, the location and the status of the asset. The RFID tag number should be linked to the system asset number one-to-one, avoiding a " one label against multiple assets" or " double-marking of the same asset " .
It is suggested to divide the location of assets into parks, buildings, floors, rooms, shelves or areas. The location code need not be too complex, but it supports the inventory personnel to quickly confirm differences. For example, the storage area can be set up as "Stockroom-A-03-02" and the results can be located directly in a specific area.
When the label is initialized, the following checks shall be completed:
- Scan the tags or the only identifier to confirm that the system is readable.
- The label numbers are tied to the corresponding asset and the name of the asset and physical information are checked.
- Check the label position to paste, avoid the shades, strong magnetic field and easily frictionable positions.
- Reread the sequestered assets for re-reading, confirming reading and writing distance and identifying stability.
How does an RFID asset inventory task be created?
After login, you usually have to select the range of the inventory, take an inventory time, the responsible person and the inventory rules. The range can be screened by department, location, asset class or asset status. If a monthly count is broken down by region; if an annual count is taken, tasks can be assigned according to organizational structure and responsibility.
The inventory rules should be clear and in advance, for example:
- The scanned to the labels but no corresponding assets were found in the system and are classified as “to be verified”.
- The system has asset records but is not marked on site as “unasseted”.
- Assets are identified but not in a physical position consistent with the system's location, and are classified as “location anomalies”.
- The same asset is repeatedly labelled as “labeled abnormally”.
After a mission is launched, the handheld terminal should synchronize asset lists, location information and inventory rules. Offline missions can be used in areas without networks, but are uploaded in time for re-establishment of the network to avoid multiple people operating on the same task to create data coverage.
What are the specific processes for the site inventory?
The field operation is usually conducted in the order of " Confirmed Area - Start Scan - Checking Alteration - Submits " . Once the inventory person reaches the designated area, check the area name and start the handheld terminal RFID scan. The device will read the label in bulk within a given range, and the system will mark the identified asset as already counted.
It is recommended to move by a fixed route instead of moving around in the area. The warehouse can scan from left to right by shelf rags, the office can scan in order of room, and the room can scan by the number of the cabinet. Every area that is completed, it is confirmed in the system at the end of the area, then enters the next area, which reduces leakage and repeats the count.
When the handheld reads an asset, the person on the site checks the number, name and location of the asset.
- Shorten the distance from the label and re-scan after changing the handheld angle.
- Avoid metal shielding, liquid containers or dense stacking positions.
- Check if the label is removed, broken or covered by other items.
- Supported confirmation is done using bar codes, asset numbers or manual searches and the reasons are recorded.
RFID does not read and write at a fixed value, is exposed to label type, reading/writing power, antenna direction, environmental reflection and asset material. The field debugging should start with lower power, gradually adjust to a range that can stabilize the target asset, and avoid misreading the labels from adjacent areas into the current task.
How does the system judge differences in inventories?
After the inventory is completed, the system compares the results of the live reading with the list of book assets, focusing on four categories: assets already encumbered, unasseted, abnormally located and additional assets to be verified. Managers cannot look at only " counted quantities " , but also check unusual details and processing records.
| Type of variance | Common causes | Treatment |
|---|---|---|
| Not | Asset movement, tag damage, spot leak | Review area to check access and transfer records |
| Location Abnormal | Assets moved but not updated in system locations | Submit changes after verifying actual location |
| Add to Verification | Label read, but asset file not created | Check the physical and source, decide whether to file or untie |
| Tag Linked Unusual | Repeat, mistouch or remark not updated | Keep the correct binding relationship and handle invalid tags |
Differences should be processed by retaining the operator, processing time, location, current location and approval. This way, in follow-up review, will make it clear why assets were changed rather than simply retaining a modified result.
How can the accuracy of RFID asset counts be improved?
The accuracy depends primarily on the binding of the label, which is used to read and review the unusual in situ. When the label is marked, it is then read in physical form; the inventory is carried out by region; and undisclosed assets and new labels are reviewed before submission. For complex environments such as metal cabinets, servers, liquid containers, etc., separate labelling rules should be established.
You can set up a random check mechanism. For example, if you check a part of an asset after each inventory area has been completed, manually check the asset number, label number and location. If you find that the tag is mistegregated or missing, you should first process the device parameters, the label position or the route of the operation, and then continue with a large number of quantitative counts.
Shanghai-based Sieger Technologies usually considers system data, field route and anomaly processing rules together when designing the asset inventory process, rather than just one scanned page. For larger numbers of inventories, a dispersed area scene should also set up task groups, control and upload verifications, to avoid duplication or leakage during multiple operations.
What results do you need to output after the inventory is completed?
A full inventory should at least be exported from the asset count list, an unasset list, an abnormal list of locations, a label abnormal list and processing records. It is proposed in the report to retain the name of the inventory, the range of the inventory, the start and end time, the number of persons, the total number of assets, the quantity and the unusual amount.
If the system supports historical records, it is also possible to compare changes in asset location by month or quarter, undiscounted number and label failure. Repeats an unset asset, usually requires a check of custody responsibilities, transfer processes or tag placements, rather than only modify the status in the report.
What should be done to use the RFID asset inventory system?
RFID is not used as a simple "moderate-sweeping tool." It addresses batch identification and data acquisition, asset-building, location maintenance, transfer approval and unusual review still requires a management process. When label numbers are inconsistent with the asset desk account, reading speeds do not produce reliable results.
The actual landing can be done in small-scale trials, adjust labels and equipment parameters, then expand the inventory range. First select an asset type and a region, verify tag identification, position determination, offline upload and differential processing, and then establish formal operating norms. This makes it easier to detect environmental barriers, misreading and data correlation problems, and allows subsequent replication to other regions.

Ms. Lei
Mr. Pang