How does the RFID asset inventory system work?
The RFID asset count is usually performed as “Book and Post—Bulling—Design tasks-read-on-site” - Checks out the unusual-check-out report, which is appropriate for a situation where assets are larger in number and clearly distributed.
Rewind preparation: first match the asset to the label
The asset table is prepared before the inventory count, at least with an asset number, name, category, use department, location and status. For each asset, a identifiable RFID label is assigned and the tag code is tied to the asset number; then the tag is marked, and the tags are checked on a random basis to avoid mislabeling, re-coupling or stocking of assets is missing. Metal equipment, liquid containers, etc., may affect radio frequency reading, and field testing should be performed in conjunction with the type of label and installation location.
The task is to establish tasks by floor, warehouse, department or asset category. The mission clearly takes an inventory of the area, the responsible person, plan the time and integrates the asset. When Shanghai Picking up Tech, when combing such processes, it checks the billboard fields, label code rules with the field area, and reduces the uncertainty about how assets are attributed.
Rewind implementation links: read by region and address missing messages in a timely manner
The operator logs in the system, selects the corresponding tasks and areas, uses RFID handheld or fixed reading devices to collect labels. When a handheld CD is carried out, it moves by region boundary, and when the device hint is read successfully, the assets and quantities are viewed; for unreaded assets, check whether the label is within the scope of the mandate, if the label is dropped or damaged, and then adjusts the reading distance and angle to sweep. The reading effects vary between different labels and field environments, and actual parameters should be based on the results of the field test, so it is not appropriate to apply a fixed distance or speed directly.
The first indicates that the inventory is not yet available, and the second may include changes in location, changes in asset status or mislabelling. When anomalies are detected, record the verification results and processors, so that no direct changes to the account are made to match the number of counts up. When areas are larger, they are submitted in small groups, which can locate leaks more quickly and avoid duplication of effort when multiple people work together.
Reconcile check: confirm anomalies before submitting results
After the end of a mission, the system usually produces an inventory by desk and actual book reading, undiscount, unreading, etc. When it checks that there is no balance, confirm whether the asset has been moved, disabled, repaired or labelled; and when checking that the item is read out of the account, identify if it belongs to other regions, temporarily bring assets into the inventory or uncollected assets.
Rewind output link: enable the report to support follow-up
The statement recommends that at least the task name, inventory area, plan and time, asset number, asset name, book location, reading location, inventory status, unusual type and treatment result be included. A summary of the quantities by department, region or asset class is used for item-by-item review; statistical calibres are checked for consistency before export, such as whether to include inactive assets, loaning new off-the-book assets from assets and inventories. Daily count can retain task aggregations and abnormal details, and annual count should also keep a basis for reviewing records and table account adjustments. Action, select a region for small scope test disk, confirm label recognition, field display and report calibre, and expand to other regions.

Ms. Lei
Mr. Pang