How does the RFID asset inventory management system work? Increased efficiency and accuracy of inventories
RFID Knowledge

How does the RFID asset inventory management system work? Increased efficiency and accuracy of inventories

PublishedShanghai Zejie Smart Technology Co., Ltd.

At two in the morning, the lights are still on in a third-party logistics warehouse. Chen, the warehouse supervisor, and three employees scan, count, and record totes one by one across five packed rows of shelving. Six hours later, the numbers in the books differ from the count by 32 items, each of which now has to be found and checked again. Dispatches are still due to go out as usual the next day, so Chen has no choice but to keep going. In warehouses doing conventional counts, versions of this scene play out almost every week: slow work, frequent errors, and tired staff. At companies using an RFID asset inventory system, a combination of hardware and software that reads electronic tags by radio and checks bulk scan results against back-end records, one person's counting efficiency is typically five to ten times that of manual scanning, with accuracy consistently above 99%. The sections below walk through deployment, day-to-day use, and results in the order they come up on a project.

From a pedal to the real cost of manual inventory

The old Chen's warehouse has about 48,000 SKU (stocked items), which used to make monthly counts by hand + hand-held terminal sweeps:Four people, working from 8 a.m. to 11 p.m., took about three days.. The problems go beyond speed. First, poor lighting and worn tags lead to failed scans, with 5%-8% of items missed overall. Second, tired staff make recording errors, such as scanning the same barcode twice or swapping adjacent locations. Third, warehouse activity stops or largely stops during stocktaking, and delayed orders lead to several customer complaints each year.

The same 48,000 SKUs, after the RFID program, were used to create a new system of social media.Two people with one RFID handheld can produce an initial count in half a day.The difference is generally within 10 items. Not that RFID must be better than all the options, but in a scene of large assets, scattered locations, high real-time demands, it turns "sweeping" into "sweeping on the spot," and it's off-the-shelf, waiting for feedback, manual recording of three steps.

How the system works: four steps in a row.

A functional RFID asset inventory management system with four blocks of structure: electronic tags, readable devices, network layers, application. Each block is problematic and has a total effect.

Electronic tag: put on the asset, equivalent to "identity card."

The usual MHF (UHF, 860-960 MHz) passive tags, which are powered by electromagnetic waves launched by a reader and retransmit data, identify the distance usually 3-8 metres, suitable for warehouse and asset-intensive scenes. The labels split the paper-free sheet used once-in-time (posted on a swing box, overpack, approximately 0.3-0.8 dollars) and the reusable ABS shell label (stacked to equipment, moulds, cabinets, about $3-15 dollars). Assets on metal surfaces must be marked with an antimetallic label, otherwise the signal will absorb the metal and the reading distance will drop directly from 5 metres to less than 1 metre.

Literacy equipment: handheld terminals and fixed

Handheld terminals are the inventory of "main war equipment", and the operator's pushing it around the shelf.80-200 labels per second.The whole shelf is cleaned out for seconds. Fixed-form reading and writing + antennas are usually deployed at the warehouse entrance or through the asset flow channel, without relying on manual walk-through, as long as assets are automatically recorded by means of a door-barlock, better suited to "card-phrase" management (Autonometric Point of Identification). When we deploy to manufacturing companies, we typically use "hand-held, fixed-to-side" combinations: hand-held, cycle count and discrepancy verification, fixed-style, automatic reconciliation of daily access libraries.

Network layer and application: data upload, reconciliation, reports

Handheld terminals are sent back to the backstage in real time through Wi-Fi or 4G scanned tags, the only global code stored within an electronic label, which can be understood as "equipment ID"; the back-office system binds the EPC and asset files (asset name, location, responsible person, date of entry, etc.), automatically reconciles with ERP (enterprise resource management system, butterflies/user/SAP, etc.) or financial accounts. After the check is completed, the discrepancy list, the amount lost, and change in asset status will generate a report that can be exported, directly to finance and audit.

Practical advance: four steps, less pits

The system is pushed from "purchase back" to "use it." It's about four steps. Each step has a common pit, and Chen's warehouse was first on the line, and two times.

First step, asset clean-up and initialization of labels.First, you have to clean up the assets in question and tag and record them on each item. This step usually accounts for more than 50% of the total project workload.It's the easiest part of business to underestimate.We've seen a project that just takes pictures of 26,000 devices, numbers, locations, and the responsible person has spent two weeks putting up a file in the system. The tag printing and labelling suggestions are done in batches, thousands of them at a time, more so by region or sector.

Step two, field environment assessment and dyslexia.Metal shelves, dense stacks, and interference with neighbouring labels can reduce the read rate from a theoretical value of 99% to about 85%. Common responses include: adjusting antenna angles, reducing reading power (to avoid excessive signal-induced serial reading), placing 5-10 cm space between neighbouring assets, and using grouping labels for batches of similar assets (the same type of eye-color labels are easy for eye review).

Step three, personnel training and piloting.Handhelds are easy to operate, but operator habits can make a big difference. Run a two- or three-day trial with a system engineer on site. Record the best scanning speed, grip angle, and antenna direction for each area in a standard operating procedure (SOP) and share it with staff.

Step four, dock ERP and financial accounts, fully operational.The inventory and flow data generated by the system need to be linked to the existing financial resources of the enterprise, or the ERP, otherwise the account is not in line with the "manual mismatch" to "system mismatch." The interface field should be aligned well in advance with the IT sector to avoid a back-to-work.

How much efficiency and accuracy can be improved?

When the system is running, its effects are usually in three dimensions:

Inventory speed:Manual barcode counts average 50–100 items per person per hour; an RFID handheld can reach 500–1,000, and a fixed portal can handle dozens of items per second. Cutting a large monthly count from four people over three days to two people in half a day is typical.

Accuracy rate:Manual discrepancies typically range from 3% to 8%, varying with fatigue and lighting. After tuning, RFID keeps discrepancies below 1%,The measured gap rate for most projects was 0.2-0.5 per cent. If there is a continuous difference, most are not RFID ' s pots but the tags are dropped or assets moved unregistered.

Labour costs and business impact during inventory:The warehouse no longer needs to shut down for extended periods during stocktaking, and staff can focus on investigating discrepancies and resolving exceptions. Several manufacturing customers report that labor for annual stocktakes fell by 60%-70%, the value of inventory shortages dropped by more than 50%, and agreement between stock records and physical stock rose from around 90% to over 98%.

A couple of real, easy-to-penetrating pits.

Metals and liquids are the two main enemies of RFID. Metals shield electromagnetic waves, and liquids (especially bottled liquids) absorb signals. In an environment where metal is dense or a high proportion of liquid assets, they can be used to protect the environment from the RFID.You must choose anti-metal labels or specially designed suction labelsAnd the common labels will be very ugly.

The labels are also posted in a more detailed manner. Too close, on the metal side, on the corner, and directly influence reading distance. It is recommended that they be placed on the asset surface, not easily worn, so that the antenna can be aligned to a position at least 3 centimetres away from metal stitches. Equipment-type assets (e.g. cabinets, moulds) suggest using a sticker of abs, which is fixed by nails or strong glue, to avoid being pulled off repeatedly.

Another common problem is that "the system is very well built but not used." Some firms buy equipment and software, and they do this by hand, and RFID becomes a setup. The underlying reason is often the process goes off: employees are untrained, responsibility is not assigned, the results of the inventory is not linked to the test. It is recommended that at the beginning of the system, the difference rate and staff performance be tied for a period of time, so that habits can be gradually liberalized.

How do you decide if you should go?

First, do you have more than 2,000 assets and are spread over multiple areas? Second, currently, the time spent on a quarterly (or monthly) inventory is more than 30 person-days. Thirdly, has the difference in accounts affected financial closure or audit findings? Two of the three questions are yes, and the above input output from RFID is recovered more than normally within one year.

Back to Mr. Chen's warehouse. Six months after launching RFID stocktaking, the monthly full count dropped from three days to half a day, staffing fell from four to two, and the value of shortages was down about 62% year on year. The books consistently matched actual stock at more than 98.5%. Mr. Chen no longer had to watch the warehouse lights at two in the morning.