How does the RFID asset inventory management system choose? Hardware configuration and integration
Industry News

How does the RFID asset inventory management system choose? Hardware configuration and integration

PublishedShanghai Zejie Smart Technology Co., Ltd.

The core of the RFID asset inventory management system is to understand four things: an inventory of objects (metal ratio, intensity), operating environment (storage/outdoor/office), system interface (ERP, finance, worksheet) and target value for identifying accuracy. The four-fold configuration and integration of hardware is much more spectatic than a starting point against parameter tables.

Let's get a hard list of the scene first.

Many of the projects are in the selection phase because the buyer and the implementer have not always understood "assembly needs". We usually ask each other to fill out a list before meeting with our clients:

This list directly determines whether the next high frequency (UHF, 860 to 960 MHz, suitable for long-range mass recognition) or high frequency (HF, 13.56 MHz, appropriate for close and accurate reading). The hardware costs of both are very difficult to construct, with a large difference in label life, and can be mixed, but first we have to sort out the scene clearly before we can discuss the combination.

The more distance you can read, the better.

The most frequently asked question is "How many metres can a reader read the most?" The standard answer to this question is "seeing the scene," not "numbers."

For example, a factory that does store, which is to take a bulk count of plastic silos on a shelf 3 metres high, would be appropriate for the distance from 3 to 6 metres. But if you only mark the server in the cabinet, reading distance at 0.5 to 1.5 metres is more stable -- signals cover the conference's "read to the next cabinet" (so-called serial reading, read the adjacent label that should not have been identified).

On the antenna selection, the Circumpolar antenna (best compatible, flexible deployment angle) and the radial antenna (more distant orientation, but more stringent angles). Open warehouses, tray-level assets are preferred to Circumpolarization; fixed corridors, locks, and water flow lines are more polarized by line.

The label is an undervalued item of cost.

And when the budget was allocated, many people were putting their heads on readers and software, and later it was discovered that labels were a constant consumer. The unit price of each electronic label ranged from a few cents to a few bucks, and in the size of 50,000 assets, the difference was hundreds of thousands.

Several practical experiences:

  1. Metal surfaces must be marked with anti-metallic labels, and general labels should be placed on the metal to read distance up to a few centimetres.
  2. The label is to be packed in a manner that matches the type of asset - planeted, embedded equipment, hanger, different structures
  3. The industrial labels usually work between -40°C and 85°C, with the normal commercial labels likely to fail in half a year.
  4. Do not mix tag protocols from different manufacturers. Even if they all use ISO 18000-6C, also known as EPC Class 1 Gen 2 and currently the most widely used RFID communications protocol, differences in chip memory layout and security mechanisms can complicate later migration

Readers and middle-texts are the focus of the system.

The type of reader is prone to the error of "reading brands, more than power." What's more critical is its compatibility with Midstream -- the middle is understood as a translation layer between the reader and the enterprise system, which is responsible for weighting data, filtering and re-transmitting. A mature intermediate is about three things:

In many integration projects in Shanghai where technology is selected, the stability of the intermediate determines the availability of the entire inventory system. We have experienced similar problems with power equipment, third-party warehousing, hospital fixed assets in three categories: hundreds of more "phantom labels" per day in the inventory report -- not even on the asset list. Such anomalies are usually not a problem with readers, but rather with the weighting and filter logic of the middle. After we have been able to convert into certified intermediates, data credibility has improved significantly.

Integrated Path with ERP and Financial Systems

When the RFID inventory system is installed, it takes time to get it on ERP and financial software.

  1. Intermediate database docking - RFID writes the count results into the intermediate library and ERP regularly takes them. The most stable, suitable for a financial month-end scenario that is less demanding for real time
  2. API Real Time Delivery - Moves Assets to ERP in real time through the RSTful interface (a common web data exchange standard). Delay can be pressed to the second level, but requires that ERP has a corresponding open capacity
  3. Handheld terminal direct connection - the inventory terminal itself is equipped with a worksheet processing module, which will directly trigger the ERP process after it has been cleared on site. It is suitable for such short-process operations as inspection, maintenance and the return of off-lease equipment

Select which path depends on the openness of existing ERPs. The financial software that came online ten years ago usually only exposes database views, and in this case the first is the most realistic. New ERPs in platform-based structures usually bring their own interfaces, and the second is more economical. If you do not, you can get the implementer to come up with a list of interfaces, then decide which path to take.

It's a few details that can easily step on the ground.

The choice of an RFID asset inventory management system is essentially to make the program match the scene, not the other way around. Counting the hard indicators of the scene, the interface capacity of the docking system, the late usage of the labels, comparing hardware configuration and integration, will be much easier to land. If you don't know which step to go, you can start with a small pilot, run the reader, tag, and determine whether or not the three-way link between the middle is going to open.