How does the asset count RFID program work? Elements for deployment of reading and writing equipment
RFID Knowledge

How does the asset count RFID program work? Elements for deployment of reading and writing equipment

PublishedShanghai Zejie Smart Technology Co., Ltd.

The focus of the asset inventory RFID programme is not simply to increase the reader, but to determine the scope, label object and accuracy requirements for the inventory, then deploy the equipment on a shelf, route and operating pattern.

Start of the reset: first, clear the inventory target and boundary

Three things are to be identified before design: take an inventory of assets, how they are stored and what purpose they will achieve. Fixed assets are counted by room or floor, warehouse materials by slot or tray, where the label is different, reading and writing distance and missing review. It is also necessary to make it clear whether the count is for quick search, reconciliation of accounts, access to library records, and avoid mistaking "read-to-label" as "check done."

The request sheet recommends recording the number of assets, area sizes, shelf material, labelable position, daily count time, and acceptable error and error processing. If the goal is to check each item, the system should record the asset number, inventory area, time and operator; if only to confirm whether a particular batch of assets is present, the logic of the count can be aggregated by batch or region.

Program Rediscovery: Tags and Read-write Devices to Select

The RFID labels transmit identification information by radio wave; the reader is responsible for launching and receiving signals, and the antenna influences the direction and range of signal coverage. The labels cannot be selected only in physical form or unit price: an asset placed on a metal surface usually requires a label that is suitable to the metal environment; and the actual reading effects are verified when it is close to liquids or is shielded from articles. The location of the labels should be uniform, avoiding areas that are easily worn, bent or held by hand.

The configuration of the equipment depends on how it works. Handheld reading and writing equipment is suitable for people to move their inventory by area, is flexible to deploy but results are influenced by walking routes and operating habits; fixed-readers are appropriate for continuous reading at the entrance or the specified channel, and require a combination of antenna coverage control to read areas. Mixed scenes can be used to record flow of fixed devices, handheld device processing cycle counts and leak reviews. In designing such schemes, Shanghai Cheeky Way Technologies Ltd will evaluate labels, equipment and assets in a single way, avoiding inference of field effects based on the distance labeling of the equipment alone.

Deployment of a double disk: location for reading and writing is determined by partition testing

The device should be determined by the actual route, the shelf height and the movement line of the person. The antenna of the fixed reader is directed to the target area and avoid a repetition of signals in the adjacent area leading to a string reading; the high shelf or multilayered storage scene shall be tested on a layer, by channel, and it is not appropriate to extrapolate the entire warehouse directly from the single point test results. Handheld points are planned for the route, the way they are stopped and the missing reading review steps in each area.

Field tests can be performed according to the "Selection Representative Area - Marked - Real Speed Inventory - Repositioning Equipment's List". The test sample should cover metal assets, general packaging, intensive positioning and edge position. Recording of labels read per round, missing assets and misread areas, re-direction of labels, antenna angles, launch power or inventory route. Not as high as possible, overbroad coverage may increase Neighbour reading; it should be stable read in target areas, which is controlled by error from outside the border.

Receivable and overtaken: integration of abnormal processes into the inventory process

The receiving and inspection cannot be a single total reading. The physical and system records should be sampled from the region, with separate e-reading, serial reading and double-reading, as well as testing for cover, asset transfer and label direction. Specific acceptance thresholds are determined by asset management requirements and field tests, and it is not appropriate to apply uniform values for exit scenarios. When anomalies are detected, the system should be able to locate the area or asset list, which will facilitate review by personnel.

When you go online, you suggest that the label code rules, the equipment point charts, the inventory route and the unusual processing records be maintained. The equipment moves, the shelf adjusts or the asset packaging changes, and the affected area should be re-detected. The order of landing can be: first to compile a list of assets and areas, then to select the tags and how to read and write, then to do an on-site partition test, and finally to determine the deployment and acceptance rules based on the results of the tests. This is designed so that the count speed, reading scope and review work are matched.