How do we organize a full-scale inventory of fixed assets?
RFID Knowledge

How do we organize a full-scale inventory of fixed assets?

PublishedShanghai Zejie Smart Technology Co., Ltd.

The core of the full-scale inventory is not "point" but "organization" -- a device that goes from book to site, requires four steps to check, mark, enter and check, and one step is needed to widen the difference. The most common thing we have seen is that the roller is: the scene is closed, the account is still intact, the reconciliation is not matched, the count is white. Put the organization in front of the action, and the count is not just going through.

Point 1: draw the border of the inventory first, then do it.

The border is unclear and the majority of the inventory returns.

We usually work with clients first to produce an inventory of the four items in a table, and then sign them and start them. The program itself is two pages of paper, but without it, all the actions that follow can be reset.

Point 2: "Close" and "take it all out."

Many teams pull a bill and go to the scene, and they find a bunch of things that are not recorded on the account, and the inventory forms are becoming more messy. The correct sequence is to clean up the account first:

  1. Export from ERP or asset systemBase date asset desk account, which includes asset number, name, specification, place of deposit, user, original value, net value.
  2. ProcessReconstruction of construction in progress— Equipment that has been acquired with experience but is not converted to fixed assets is first posted on the books.
  3. ProcessEnd-of-life undiscounted— Assets that have gone through the approval process but have not been written off in a written-off account are removed from the desk accounts.
  4. TagsUnaccounted assets— Items found on the scene that are not on the books, and a separate ready-to-see sheet is created so as not to be forced into the main table.

This usually takes three to five working days, depending on how clean the system data is. If the books contain thousands of errors or omissions, use a script or tool for bulk cleanup and then spot-check manually.

Point 3: On-site inventory should be "grouped + standardized"

The scene is the most prone to disruption. Three details determine efficiency:

For manufacturing inventory counts, Shanghai Zejie usually recommends teams of two or three. One group scans equipment into the system, and another verifies the tags on site, with two people cross-checking. A 5,000-asset project can finish the on-site count in five to seven days.

Point 4: The reconciliation is for "causes of difference" and not just "numbers of discrepancies".

Once the inventory is completed, there are three types of differences between book and physical: the surplus (outside the books), the deficit (on the books but not found), and the information difference (both accounted for but not matched by the number, location, user).

The three types of difference are treated differently:

The field recommendations of the table of variances include: asset number; type of discrepancy; amount of discrepancy; cause; responsible department; disposal method; processor; time of completion. This table is developed to give the management value of the entire sub-count.

Point 5: Dispose, not just report.

The inventory report is the end of most businesses’ stock-taking. But the disposal action that followed is the real point of value:

  1. Recording of gains• Relocation costs or valuations of the same type of asset are recorded and the desk accounts are adjusted.
  2. DiscountDisaggregation follows the process of obsolescence, loss and damage, liability and compensation, and write-off is synchronized with tax filing.
  3. System revisionThe inventory revealed problems — such as the rate of de-labelling, the rate of unupdated location changes — to be pushed back into the asset management system and to identify those responsible.
  4. Next count optimization: Inventory cycle, inventory approach, clustering rule adjusted to this experience.

In the projects we have done, disposal action is in place and the second count of discrepancies can be reduced by more than 50 per cent on average; only those that report no disposal are reported, and the difference tends to be similar to the first.

Point 6: The computer tool is used on the blade.

The more tools the better, the better.

Shanghai-based technology usually recommends to clients that they run systems and processes, then go on; the system is not a tool for alternative management, but for solidizing them. First, use Excel to run the inventory over two rounds, and then get the problem out of hand, and then introduce it into the system, and landing will do much better than going straight on.

Summary

Full-scale inventory is a typical "one hour savings, one week later." Six things are done in order: drawing the boundary -- scope, time, responsibility, four things with calibre; clearing the books -- construction in progress, end of life, disposal of off-the-book assets first; standardized counts — grouping, two-dimensional code, taking photographs to take evidence; finding reasons — three types of differences are dealt with separately; handling — recording, scrap, system revision; selecting tools — scale matching, not blind on the system.

If you start a full-volume inventory this year, you suggest that we start with the first two points, and then you can move the rest in a rhythm. The asset count is a few times in the firm where "the book and the physical must be" mandatory alignment, once solid, and then management will be much easier.