How do you manage the asset management RFID label?
RFID Knowledge

How do you manage the asset management RFID label?

PublishedShanghai Zejie Smart Technology Co., Ltd.

The problem with the asset management RFID label usually falls on two issues: whether bulk generation is done by itself or by finding a supply to do so? Is the label issued centrally and in a single case or by department? These steps directly determine the efficiency and error rate of subsequent inventories. The criteria for judging are not complex -- looking at the level of assets, changing frequency and conditions on site.

Cost comparison: Self-build vs Outsource Custom vs Platform

For an in-house RFID printing setup, the main direct costs are equipment and supplies. A typical desktop RFID tag printer costs roughly CNY 8,000-30,000 per unit, based on common recent quotes and depending on brand and print resolution. A separate RFID reader costs extra. Standard ABS on-metal tags cost CNY 0.30-1.20 each, while ceramic tags with more demanding encapsulation requirements may cost CNY 2-5 each. Including labor for design, layout, and encoding, the overall cost is around CNY 0.50-2 per tag.

Outsourced to RFID label providers customised with a standard startup of 500-2000, a unit price of 1.5-5 yuan (including pre-writing and surface printing of data). The advantage is zero input, the disadvantage being high single-start orders and long re-programming. Experience in the previous year required less than 5,000 units, and very small changes in product types, which were more economical; above this scale, the marginal cost of self-building begins to lead.

Another compromise is to use the common RFID card platform, which applies online labels on demand, print and write in bulk, and saves the cost of developing its own system. This way, single-cost, between self-build and outsourcing, fits into a team that is also working at pilot stages, making swings. The unit price above is the area that the enterprise often hears when asking for offers, or actually suggests that it be compared with the current offer to the supplier.

Data Writing Effects: Pre-initialize vs live cards vs mix mode

The timing and location of the label data, which directly affect the speed of distribution and subsequent accuracy of the inventory, are clear.

Pre-initiation is when the EPC (Electronic Production Code, understood as the only global identity number for RFID label) and asset numbers are written to a chip at the printing stage, and the tags are posted directly on the scene, so that the entire distribution can be scaled down to the minute level. This is the way to get new equipment to the delivery, and one-time mass cards.

On-site tag issuance uses an RFID handheld to write and bind tags individually. It is flexible and lets staff enter dynamic fields such as location, user, and depreciation status on site. Each tag takes about 30–90 seconds, making more than 500 laborious. This option suits occasional additions or tags that need rewriting.

The hybrid model takes both: the supplier pre-written the EPC and base code, and then used handheld to write locations on site, using sector-specific information about changes. Shanghai-based technology uses this approach when it does asset inventory re-engineering for many businesses, and it balances efficiency and flexibility better.

Applicable process: centralized vs distribution by level vs self-service

The choice of the labeling process is inherently dependent on the physical distribution and management level of the asset, each with a boundary to apply.

The assets are posted to the enterprise that is located at the headquarters warehouse or in a single campus.

The key to this approach is to have a label status query page, or it would be difficult for headquarters to know which asset each label will eventually be on.

The self-help is a suitable place for mobile assets, for example, portable equipment in hospitals, tools for construction sites, and often variable asset locations. This usually goes with the RFID Self-Designer or Mobile-APP, employee scanned, system automatically bound people and assets, and saves the middle link.

Common problems and pits: label itself, data layer, process layer

In the implementation of RFID asset management, problems are usually concentrated on three levels, and programmes can be much better off by identifying the per-story pits.

The most common pit in the physical layer is anti-metal performance. A normal paper label is placed on a metal cabinet, and reading and writing distance falls from a few metres to a few centimetres of theory, and cannot be cleaned at all. The solution is to choose ABS anti-metallic label or ceramic tags, which cost more than a few times more for each individual, but the efficiency of the count can be increased several times.

The most typical pit in the data layer is an EPC code conflict. Two different labels are identified as one ID, often because they are written using a reusable short sequence number or the initial data do not recheck. The standard is to verify the EPC area in bulk before writing, ensuring that it is the only one in the world.

The most hidden pit in the process is a tag that is not recorded, or a label that is not marked but the asset is written off. Most of it is found in the distribution and financial transactions that are disconnected. The solution is to write a label into the action binds the asset system, a label that is considered valid only after being successfully registered by the system and that is not stored in the library and reprinted directly.

Another easily overlooked problem is that labels and physical assets are not matched, and the tags that are swept on A devices at the time of inventory are posted on B equipment, but the system is registered with B equipment. This is usually associated with no field confirmation at the distribution point. The standard process is to take a side-shot of the account, three steps in parallel, each one traces to a specific asset photograph and location.

Return to selection itself: Batch generation of a numerical scale, more than 5,000 units per year, is self-constructed, and less ambitious; data is written into the stability of the asset scene; distribution processes are seen in the density of the asset distribution; the core of the pit is to tie the labels and the assets to an action. Four dimensions are shown together, and it is basically possible to select the right combination.