How does the group RFID asset management system work? Multilevel controls.
RFID Knowledge

How does the group RFID asset management system work? Multilevel controls.

PublishedShanghai Zejie Smart Technology Co., Ltd.

Last year, we helped a manufacturing group count its assets. The handheld terminals in the subsidiaries' warehouses alone took three days to count, with many items missed or counted incorrectly. The group replaced the Excel registers scattered across plants with an RFID system. Headquarters can now see in real time where each forklift and batch of spares is at 12 warehouses nationwide. Here is how to build an RFID asset management system for a group, with a focus on control at multiple levels.

Let's see what the hard part is with corporate asset management.

Group-based enterprises manage assets, unlike single factories, and trouble is concentrated in three places. First, physical location of assets is dispersed, across cities, across provinces and even transnational countries, traditional bar code sweeps rely on manual case-by-case operations, and are inefficient and prone to errors. Second, there are many organizational levels, headquarters, business, subsidiaries, workshop level four, which may involve asset transfers and write-off approvals, how the authority is divided, how the process goes, what is at issue. Third, it's difficult to reconcile the financial value with the physical value of the accounts, often not being matched, and at the end of the year, we have no idea.

Shanghai-based Selective Technologies typically uses a round of asset mapping to service such customers, dividing assets by value, liquidity, importance in A, B, C, and expensive, and moving frequently on the RFID label (an electronic tag that automatically identifies assets through radio frequency signals, which can be read from a distance on an device), large but low-value, which can be delayed or transitioned with normal bar codes, so as not to spread too much at once.

Hardware and network bottom: let the label be "seed."

The hardware selection directly determines the quality of late data. Asset labels are both passive (passive) and active (active): metal cabinets, forklifts, emulators, such as large or metal surface assets, and recommend anti-metal tags; warehouse trays, with a large but close-range number of swing boxes, with an average non-source UHF tag in place with fixed-type readers, with reading distance stabilizing at 3 to 8 metres. If assets move frequently across the plant area, such as engineering vehicles, detection devices, then consider source tags, and regional positioning in conjunction with base stations, with batteries having a life of 2 to 5 years.

On the network level, a reader within a warehouse that is used to overwhelm or industrial Wi-Fi covers the site, can retransmit data from a field or large plant using a 4G/5G gateway. Note that RFID readers have very large raw data, and at peaks they can produce tens of thousands of records per second, and must be filtered and weighed in the middle, instead of having end-end databases washed down quickly.

Multilevel controls: how data flow from workshop to headquarters

This is the soul of the system. The typical structure is four layers:

First level is the collection layer., consisting of handheld machines, fixed reading and writing machines, closed doorways, which read labels to local locations. Handhelds are suitable for motorized inventories, fixed readers are appropriate for automatic entry/exit registration, such as the installation of an antenna for each warehouse gate, and autorecording of vehicles and trays once they enter or leave.

Second level is the edge., is usually deployed in a subsidiary or enterprise room. This floor does several things: data cleansing (removes repetition, misreads), initial connections (belts on ID and asset numbers), local caches (the network is broken and can continue). The advantage of edge servers is that even if the headquarters link fails, the branch operation will not be affected.

The third level is the platform.This is the primary data centre for group headquarters. The rules for managing tag coding, asset owner data, user privileges, approval process. The data of the sub-units are synchronized at the set frequency, and assets that require high real time requirements, such as the production equipment in use, can be synchronized at a minute level, and normal spare parts can be used once a half hour or a day.

The fourth level is the application layer.And you see different things for different players. Group management sees a map of the distribution of assets across the group, utilization, idleness; head of the cause department looking at the details of several of its plants; workshop asset managers doing routine access, returning, inventorying operations.

Authority and process: multi-level managed life portal

The power model suggests three sets of "Organization Tree+Performance+Scope" packages. The organizing tree corresponds to the actual corporate structure, which is hanging from the root of a group to a specific department or group. Role definition functional privileges, such as asset managers can count but not approve for retirement, finance can see value but cannot modify a table account. Data ranges control horizontal boundaries, such as those in East China only see Jiangsu, Zhejiang, Shanghai subsidiary company data, and do not see South China.

Approvals follow value and asset class. A lost 2,000 yuan tool only needs a report from the workshop. Transferring a 500,000 yuan machine requires three approvals: the subsidiary supervisor, the business unit manager, and the group asset committee. Configure the steps in the system without changing code each time.

What's the result of landing?

The system runs for six months to one year, and changes are visible. On the count, it took a week to take stock of a warehouse, now two or three hours to get the handheld machine in a lap, and then the whole group count is down from a month to three or four days. The difference rate has been reduced from a few percent to just under a thousand, with idle assets quickly identified, either allocated or disposed of, and the funds being used.

More crucial is the audit and compliance dimension, where group headquarters can readily transfer any asset from its location, status, history change, problems trace back to specific links and no longer rely on manual data-processing of the sub-units ' reports.

A few easy-to-penetrate pits. It'll save you time to know.

First, the label code does not have to be determined by each subsidiary. The group level has to harmonize the rules of coding, compatible with international agreements such as the EPC (electronic product code), and future and downstream interfaces do not contain shells. Second, metal and liquids are highly disruptive to RFID signals, field testing is done before labelling, and no labels are found to be unread and then back to work. Third, data from old systems move in a hurry, run in parallel with new systems for a month or two, and the differences are checked and then switched.

The system is not used for free.

Group-level RFID asset management is not a go-live, but essentially a combo and digitization of the process. From hardware selection to network architecture, from data stratification to power model, each level is designed to fit the actual organizational shape of the enterprise. Now that these core links are secured, the system can really be used, for long.