How is the equipment spare parts management programme prepared? Configuration and processes
RFID Knowledge

How is the equipment spare parts management programme prepared? Configuration and processes

PublishedShanghai Zejie Smart Technology Co., Ltd.

The core of the equipment spare parts management programme is "There should be, there should be no unstocking, and it can be found when needed." The program usually consists of four blocks: the sorting and coding of spare parts, stocking quotas, procurement supply processes, and treasury management. First, the spare parts are divided into A/B/C categories according to criticality of equipment, with maximum/minimum stock levels set, and the "declaration-approved-procurement-receiving-receipt-take-take" link runs, then the information system is available for billing and early warning, and basically land.

What are the elements of the spare parts management programme in general?

The normal structure consists of:

Programmes are generally issued in the form of enterprise-wide management documents, which contain clear lines of responsibility and approval nodes at each point, otherwise they are easily implemented with a shell.

How do you classify spare parts? How does the ABC classification work?

Classification is a prerequisite for stocking. The classification of spare parts has two dimensions: by criticality of equipment, by value and by frequency of consumption.

Three categories by criticality of equipment:

By value and consumption frequency (ABC analysis):The cumulative amount of the annual consumption is ranked from large to small, with the first 70 per cent being category A (small but high in value), the middle 20 per cent being category B and the last 10 per cent being category C (large but low in unit price).

In the actual programming, two dimensions are used in a cross-cutting manner. For example, one type A spare to import a speed reduction machine is provided on an ongoing basis even if it is not expensive per unit; and large consumption of class C seals can reduce costs by purchasing them in bulk monthly terms.

What is the quota for spare parts stock (highest/lowest stock) set?

There are three common methods of calculation:

1. Experience-based methodBased on historical consumption data, the average monthly consumption for nearly 1-2 years is measured in conjunction with the procurement cycle. The minimum inventory = daily average consumption x the security factor for the procurement cycle (generally 1.2-1.5).

2. Formula:

Minimum inventory = average daily consumption x procurement cycle + secure inventory
Maximum stock = minimum stock + economic order (EOQ)
Security inventory = average daily consumption x (maximum procurement cycle - normal procurement cycle)

3. Equipment manufacturer recommendation method: Imported equipment manufacturers usually provide the Recommended Spare Parts List (Recommended Spare Parts List, RSPL), which indicates the recommended number of vulnerable and critical items, which can be used as an initial value and adjusted for actual performance.

To cite an example: a plant with a mechanical seal for a key pump consumes 2 items per month, 15 days of normal procurement cycle and can be delayed up to 25 days.
Safety stock = (2 units ÷ 30 days) × (25 − 15) days ≈ 0.67, rounded to 1 unit;
Minimum stock = (2 units ÷ 30 days) × 15 + 1 ≈ 2 units;
The maximum inventory is set at 1-2 months of consumption, with a rate of 4-6 items.

How do you build the spare parts code and bill?

The code is the "idid" for spare parts management, and a confused code makes the billboards a mess.

Example format:Equipment category code - Device bit number - Spare parts category code - Sequence numberFor example, 03-101-F-0018, which indicates Category 3, Bit 101, Vibration, Spare No. 18.

Each account contains at least the following: name of spare parts, specification type, equipment number, unit, unit price, current inventory, minimum stock, maximum stock, storage position, supplier, last time out. The account is still available when the data in Excel is small, more than 500 items are recommended to go directly to the spare parts management system, otherwise the search and warning are slow.

Where's the spare parts procurement process going?

The core of the procurement process is to distinguish between "who raises the demand, who approves and who executes it".

  1. Request declaration: When inventory touches the lowest stock or equipment point check and is found to be poor, a receipt or purchase request is completed by the equipment operator or maintenance worker.
  2. AuditThe Chief of Workshop verified the need for vendor reconciliation and price reconciliation by the Procurement Department, which requires supervisory approval in an amount above a certain level (e.g. $5,000).
  3. Procurement implementationRegular spare parts are selected from the list of eligible suppliers; category A or sole-sourced spare parts are subject to long-term cooperation and, where necessary, security stock agreements.
  4. Incoming and acceptedChecks the type, quantity, appearance and, if necessary, for inspection or trial.

The long time cycle of imported spare parts (3-6 months is common) and it is recommended that pre-procurement triggers be provided separately in the programme — for example, 1.5 times the minimum stock — to commence procurement instead of waiting to run out.

What about spare parts, and access?

Cooney Management: Three steps:

LibraryThe following are the criteria for the verification of purchase orders, certificates of certification and inspection reports, entry systems (codes, quantities, cargo slots, batches), identification cards or bar codes.

Out of the library.: Follow the first-in-first-out (FIFO) form, following a receipt. In an emergency, "first-in-first-out and after-out" is allowed, but it is done within 24 hours. Shanghai-based Tech Ltd., in its EAM project for manufacturing enterprises, customarily bound out the inventory and worksheets so that spare parts consumption can be directly integrated into specific equipment, with evidence of cost analysis at the end of the month.

Refunds and redeploymentsUnused spare parts should be returned to the warehouse after their acquisition and transfers between multiple warehouses should be registered to avoid discrepancies in the accounts.

What do you do with spare parts inventories?

The inventory is not for the word "conformity" but rather for the process gap.Looped-upThe key actions of the inventory are:

What are the common problems with spare parts management?

Several high-frequency pits:

Most of these problems are rooted not in implementation, but in the insufficiently detailed and general rules of the programme itself.

What are the practical recommendations for programming and land-location?

Three sentences summed up:

  1. Classify first and set up., do not start with counting the amount of inventory. The classification determines what quota strategy is used.
  2. The plan is to write down the job.Each node has a clear duty and approval person, avoiding the vague expression "relevant department".
  3. Data is traceable.The accounts, receipt forms and inventory records are entered into the system, not relying solely on Excel and paper documents.

Once the plan is ready, run a one- to two-month pilot on one line or in one workshop. Fix the issues it reveals before deploying plantwide. Spare parts management is an ongoing part of equipment management, not a one-off project. Review and revise stock targets and categories every six months using consumption data.