How does the RFID system make up, label readers and management software?
Many people understand RFID as a "label with a reader" set, but without the management software, the system won't get up.
A functional RFID system consists of three parts: an electronic label on the object, a reader responsible for launching and receiving radio frequency signals and communicating with back-offices, and a management software that organizes data into information available for business. The tag saves data, reads data, manages data for software, one is not possible. Below is a clear description of each layer in the order from the end to the computer.
Electronic label: "Small chip" on the object.
The electronic label is also called the radio frequency tag, RFID tag, which is essentially an antenna plus a small chip. The chip contains the only code (commonly known as UID) and user data area, which is used to detect radio frequency signals from readers and send back information from the chip.
The three types of labels that are common, by power: source, non-source, semi-source (also called semi-source). The passive label does not have batteries, the electromagnetic wave power from a reader, low cost, small size, long life, market seen cards, stickers, laundry labels. The active tags bring their own batteries, recognize distances of tens or even hundreds of metres, use containers to track, vehicles to identify these scenes. The half-neutral labels are the compromise between a cell that keeps the chip in its condition and a reader-friendly device for communication.
By frequency: Low frequency (LF, 125 kHz–134.2 kHz) is highly permeable but short-range, used in animal earmarks and closed doors; HF, 13.56 MHz are common to our daily bus cards, ID cards; UHF, 860 MHz-960 MHz) recognizes distance, can read multiple labels at a time, is the main frequency of warehousing, logistics, retailing; microwave (2.45 GHz) is used in some special industrial scenes.
When selecting the label, four parameters are considered: Identification distance, storage capacity (small only UID, large enough to reach KB), cover form (papers, cards, anti-metals, PCB hard labels, etc.), application environment (high temperature resistance, chemical corrosion resistance, anti-metal interference, etc.). Shanghai Zeoje found that ordinary ABS casings were corrupted in some solvents and then replaced with PPS material - this is often ignored, but problems usually occur on top of it.
Reader: The "translator" with the tags and software.
The function of the reader is two: to launch a radio frequency signal to the label by antenna, activate an passive tag; and to receive data returned by the label, to convert the radio frequency signal into a digital signal and to transmit it backstage management software by wire or wireless means.
The reader has two parts: the host, which handles signals, protocols resolves them, and communicates with the upper-level machine; the antenna is responsible for the launch and reception of radio frequency signals. A host can connect multiple-route antennas (such as 4 roads, 8 roads) so that a region can form stable reading coverage. The antenna is also polarized and wiring, and it is not sensitive to labels, suitable for an uncontrollable view of labels like current lines; the line is more polarized, but the label is required to be as positive as possible against the antenna.
The interfaces and protocols are also optional. Common interfaces are RS232, RS485, Ethernet, Wi-Fi, 4G/5G, Bluetooth etc., Protocol Layers typically support ISO 15693, ISO 14443, ISO 18000-63 (EPC Cass1 Gen2), GB/T 29768 national labels, etc.
The reader also has a commonly underestimated ability -- its collision-proof algorithm. The same label that enters the antenna area in one instant may be more than one, and the reader will read it one by one in sequence, without any disruption. ISO 18000-63 uses a collision-proof mechanism based on random time slots, which is actually measured at a level around 200 labels per second under a storage site, which is why RFID is faster than bar code in a fast-distribution sorting, warehouse table count.
Management software: Turning data into the brain of a business operation
Readers are just passing up data, how they are used, how they alert, how they connect other systems, and how they manage software. A complete management software usually consists of four modules:
- Equipment management: Responsible for the discovery of web-based readers, configuration parameters, monitoring status and remote upgrade solids.
- Data acquisition layer: responsible for communication with the reader, deciphering original label data by operational rules (e.g., EPC code to SKU number), re-heavy and timetamping.
- Business logic layer: Specific business processes such as processing inventory, access library, inspection, error prevention.
- Integrated interface layer: The data is pushed to ERP, WMS, MES etc. through RESTful API, message queues, database viewing.
The management software does not have to be written at the top. Many RFID factories provide middleware, which is a "data transit station" for dealing with readers, making protocol fit, exposing standard interfaces, and using business systems to access interfaces. We prefer middle + two layers of business system, middle-processes "what read," business system handles "what reads read and then done", clear division, and easy to maintain later.
From reading to using: how do three parts fit together?
To give an example of warehousing, three parts are linked: the truck to the platform, the fixed reader antenna at the door is in the direction of the car, while the tray label within 5 metres is read; the tags send EPC code back to the readers, who send data through the Ethernet to the warehouse management software; the management software finds the purchase order for this shipment in the database, verify the quantity, and the code, and automatically replace the stock with "up-to-up" in WMS, and a command to PDA on the forklift that has up-placed.
The whole process is done in seconds. To do this, the bar code takes a single manual sweep; RFID is non-contact, multiple readings, automatic uploading. This is the value of three parts of their job -- labels are "identified," readers are "identified and moved", software management is "understanded and acted upon."
Selected and landed practical recommendations
First, specify the frequency of re-selection. Store count, vehicle identification, retailing of clothing, with priority given to UHF; door-barrel, ticketing, identity card category, 13.56 MHz more mature; animal, liquid penetrating type, with lower frequency and better security.
Second, small-scale piloting before spreading. RFID is highly affected by metal, liquid, multilabelled environmental effects, and an empty warehouse detects a 10 metre device that can read, which may be only 5 metres on the shelf. It is much more cost-effective to do a 50-100 square metre pilot first than to just store it all back.
Third, fix the interface and data specifications in advance. How the EPC code corresponds to your internal SKU, what fields are used for the reader data uploading, how the error retry mechanism is written, which is where the project is most vulnerable, and how the late system actually works.
The RFID system is complex and uncomplicated, clears the boundaries and interfaces of the three layers of the management software, then selects the actual scene, which basically smooths the project. The real difficulty is never hardware parameters, but the design of business rules and data flows -- part of which would be less trouble returning to work if it was combed with experienced implementers at the outset.

Ms. Lei
Mr. Pang