How does the RFID asset inventory management software work? Batch collections and statements
How does the RFID asset inventory management software work? Many projects are stuck in the first step -- hardware selection. Handheld terminals, fixed readers, tens of thousands of dollars, double the price of a car, and three people apply different scenarios. Hardware selection is not enough, how the parameters of the software are adjusted, how the report is made, which pits are to be avoided early, each directly affects the final count results. Below is a four-dimensional breakup.
How to select hardware: the applicable boundary of handheld terminals, fixed and inventory vehicles
The RFID asset inventory software is not only a reading hardware, but also a nice interface and a blank label. Three common collection methods are differentiated by the way they are used and each covers different scenarios.
Handheld RFID terminals are the simplest option. Prices range from CNY 2,000-3,000 to CNY 10,000-20,000, depending on range and protocol support. For a midsize warehouse with moderate asset density and frequent stocktakes, handheld terminals are generally enough. Staff can make one pass along the shelving and scan the warehouse in about half an hour.
Fixed-readers are installed at the warehouse entrance or at the shelf entry/exit, and the assets are automatically recorded in and out of the warehouse, save manual operations. However, fixed reading is incomplete - the inside of the warehouse will not pass through the gate and must be completed with handheld terminals or pick-up vehicles.
The RFID dial-up handle holds the antenna to the top of the cart, reading distance and coverage more than twice as large as that of hand-held, high density, metal environment. A company that rents IT equipment has thousands of servers and switches, high density, metal, and then switch to ultra-high frequency RFID-counting vehicles, with a significant increase in single scan coverage depth over hand-held.
| Modalities | Input Range | Applicable size | Main limitations |
|---|---|---|---|
| Handheld Terminal | 2,000–15,000 | Small- and medium-sized, shelf-like | Read the distance short, we have to go by district. |
| Fixed Reader | 5,000–30,000 | Auto-record entry and exit | Cannot cover the inside of the warehouse |
| RFID CD-ROM | 20,000 to 80,000. | Large-scale, high-density, metal environment | Big, narrow hallways. |
How do you fit the parameters: read power, filter rules and weight-proof mechanisms
Once the hardware is in place, the software does not automatically finish all the work. The RFID asset inventory software contains several parameters and can not be easily calibrated to read a bunch of garbage data.
EPC Filtering Rules. The RFID label reads the EPC code (the only electronic identification number for each label) by default, but it is also a location that, in addition to your asset tag, sweeps to the next warehouse, passing goods labels. Without filtering, the backstage receives data that does not belong to you. In Shanghai's quick-start project, first live collection usually runs empty, and exports the read EPC to compare, differentiates between target tags and jamming sources, and then writes in the filter rules.
Read-List Threshold. One tag can be read more than 10 times per second. Without deduplication, quantities can appear ten times higher. A common software rule counts a tag only after at least three consecutive reads. The exact threshold depends on reading speed and how fast the tagged item moves.
Reader Power & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & and & & & & & & & and & and & & and & & & & and & & & and & & & & & & and & and %. UHF RFID power, in the roughly 860–960 MHz band with slight variations by country, directly affects read range. One customer with metal shelving initially used the default power and picked up only the outer racks; assets deeper inside did not register. Higher power solved that, but raising it too far can pick up the neighboring zone. This setting needs repeated field testing.
How do you get the statements? From original collection to variance analysis to management decision-making
The RFID asset inventory software generated a report that was not in a single format, but was presented on three levels, from the original data to the management conclusion layer.
First floor is...Original Collection Table, recording which EPCs were read, the corresponding assets, and the time of each read. IT staff or asset managers use this table to investigate discrepancies.
Second floor is...Statement of variancesThis is the most important source of financial and audit concerns, and the main basis for re-checking management gaps.
Third floor is...Summary statements, by department, asset class, and life expectancy, for management to make procurement and depreciation decisions.
Export formats typically support Excel, CSV, PDF, or you can also match ERP or financial systems within the company. The export fields are to be fully integrated into the system - asset numbering, name, date of purchase, original value, net value, user, location for storage, missing field, and the report is discounted.
Which scenarios are easy to step on: metal, position and electromagnetic interference
The most problematic when RFID assets inventory software is online is often not the software itself, but the physical environment.
Metal and liquid interference. The RFID label is placed directly on the metal surface or in a liquid container, and reading distances shrink significantly. A customer who does chemical material, a barrel liquid, can hardly read it with a general label, which is then replaced by an anti-metallic label -- such labels are much more expensive than normal labels, but the metal or liquid scene must be used.
Tab Paste Location. Some assets themselves have metal or plastic casings, cannot find suitable paste, forced to be on the side of a curve or turn corner, and can not be swept by a reader. Experience is: labels are relatively flattened on the scanned surface, face out, unshielded, in the direction of the reading machine antenna.
Electromagnetic interference on siteThe RFID is blocked by the frequency transformer, the power-power generator and the Wi-Fi base station. A factory has a chronic low inventory rate of its warehouses, which eventually turns out to be too high for the trans-frequency in the next workshop to be able to solve the problem by placing a screen on the reader.
"Readed, but no data.". The labels are physically read, but the EPC code is not registered in the system. This is often the case when newly purchased assets are not labelled or labelled. The solution is to include tag printing and the EPC entry into the process at the procurement point, rather than remedying it ex post.
These pits are not large, and mixing together makes the inventory results distorted and the statements as beautiful as they are. When Shanghai does the project, it takes a day or two to make an on-site survey, and then to map out the variables before laying them over, instead of going straight in.
The real good sign of the RFID asset inventory is hardware, software, and process three. Hardware is wrong, software is not smart; software parameters are unmodified, hardware is expensive and only dirty data can be obtained; processes are not kept up, and the results of the inventory are not implemented. It is recommended to start with a small pilot -- pick one or two warehouses or two types of assets, run through and then expand to the whole company, which is more smooth than a single-time spread.

Ms. Lei
Mr. Pang