What is RFID asset management? Discrepancies with barcode asset management
Many people think that RFID is simply changing the bar code to an electronic label. The difference is how it is identified: the bar code requires equipment to read each label, and RFID reads label information on a wireless frequency that can be read in bulk under appropriate conditions. RFID asset management is well suited for fast-tracking, position-flowing scenes; bar-code programmes are more dependent on a case-by-case scan, which should be selected in relation to the number of assets, the frequency of the count and the physical environment.
The core of RFID asset management is to make asset information wirelessly identifiable.
The RFID is a radio frequency recognition technique. The system consists of electronic labels, readers and asset management software: tags are attached to assets, write or associate asset numbers; readers send radio frequency signals and receive information returned by tags; software matches the results with records such as asset desk accounts, licensees, places of storage.
The label does not in itself amount to a complete asset file. It usually keeps limited information, such as the identification code, equipment name, date of purchase, responsible department, etc., maintained by the management system. Reader and writer recognize the tag, the system searchs the corresponding records according to the identification number and updates the count or flow status as it is performed.
The different ways of reading, the difference between two management methods.
| Relative dimensions | RFID asset management | Bar-code asset management |
|---|---|---|
| Identification | Reader reads electronic labels via wireless signal | Scan device to read visible bar code patterns |
| Operational requirements | Partial application is available in bulk, without individualized | Usually, a single-scan tag. |
| On-site impact | The reading effects are influenced by environmental factors such as label type, distance, metal or liquid | The labels need to be visible, and the stains, shielding or damage may affect scanning |
| Applicable characteristics | scenes suitable for larger assets, frequent inventory counts or wish to reduce the number of operations per case | Fits to a modest scale of assets and clear process-by-project verification |
The RFID does not always identify in isolation. Label frequency bands, reading and writing power, antenna setting, asset material and label orientation affect the results; multiple labels also handle double reading through system rules when they enter the reading area at the same time. The bar code is more visual, with manual direct view of the coding and checking, but a scan action needs to be completed on a case-by-case basis.
The selection depends on the inventory process, not just the unit price of the label
If a warehouse plant needs to regularly take stock of equipment scattered in the storage area, it can first combo the amount of assets, set up the shelf, and install the inventory route and labels, then test the reading effects in different areas. If assets are concentrated, the count is not high, the bar code-by-line scan may have met the requirements; if the inventory is heavy, the mass readability of RFID may be more valuable, but the overall cost of tags, reading and writing devices, system modifications and field calibrations needs to be assessed.
Shanghai-based Select Technologies, when it comes to the management of asset management needs, distinguishes between “recording asset information” and “on-site identification assets”: the former relates to billboard fields, responsible persons and status rules, and the latter to label selection, reading distance and environmental tests. Once the inventory process is completed, then deciding whether to use RFID or bar codes is usually more useful than comparing single label prices.
Clear data and validation steps before landing
- (c) To collate the list of assets, harmonize key fields such as asset numbers, names, locations, responsible departments and so forth, and address duplicate or missing records.
- The metal surface, near liquid or outdoor environment should be tested for physical reading.
- Select a small range pilot, record missing reading, repeat reading, manual checking of time-consuming and label loss, and then adjust the label position and readout process.
- Determine daily rules, including access restitution, change of location, end-of-life processing and review of discrepancies in inventory, to avoid a disconnect between the systematic recording and physical state.
The RFID and barcodes address the same type of asset identification problem, with differences mainly in reading methods, operational efficiency and field adaptation. First, quantify the size of the asset, take an inventory of frequency and environmental conditions, and then test the readout effects with small-scale tests to determine which is more appropriate for specific management processes.

Ms. Lei
Mr. Pang