How does the rfid handheld manufacturer assess the development and delivery capacity?
RFID Knowledge

How does the rfid handheld manufacturer assess the development and delivery capacity?

PublishedShanghai Zejie Smart Technology Co., Ltd.

Assessing the RFID handheld manufacturer, two things are at the core: whether R&D really eats up RFID modules, antennas, solids, and whether capacity delivery can hold up the order rhythm. Only hardware-assembled plants can be made to read, and the time frame and sale of a plant that can do research but has a steady yield is delayed. Both must go through simultaneously, and any lack of one will cause problems over time.

Why can't we just look at the hardware parameters?

Many of the models are first-hand to look at screens, CPUs, batteries, and protection levels, which are considered to be similar to the three-default cell phone. This is not a complete error, but it does not touch the RFID handheld door. The most expensive thing in a machine is not a screen or a CPU, it's an antenna inside the RFID module and the big papist space -- can you stabilize your little label in your warehouse, if there's any missing reading, if there's no interference, almost all of these parts, which is the area that ordinary consumer handheld manufacturers rarely address.

So the first step of the evaluation is to figure out whether the manufacturer is "doing a whole-of-the-mill integration" or "doing RFID cores." Both seem to be able to come out, but there are huge differences in actual scene problems.

Three hard indicators of R & D capacity

Assessment of R & D does not have to listen to stories, and three specific questions are addressed:

Shanghai-based Sieger Technologies has experienced a situation in the storage and manufacturing industry: customers' labels are placed on metal tacks, and ordinary external module reading distance falls directly to about one third of the original value. The benefits of self-study modelling are here -- there is no need for customers to change tags or re-hardware, because they can adjust metal interference by adjusting power and Q values (coordinated parameters in radio frequency circuits).

Real thresholds for capacity and delivery

R&D is the upper limit, and capacity and delivery are the lower limits of what really affects the next single experience.

Three steps to get the evaluation on the ground.

Put the above point on the line of action and recommend that we proceed along these three steps:

  1. Take the sample to the real scene.The most complex work in your warehouse -- metal shelf, intensive labels, long distances -- let the sample run. It's only stable to read 200 labels on a single channel with a drop rate of less than 1%. The 10m reading distance on the colour page is detected in an empty area, and it's almost all at a discount.
  2. The site or video lab is required.The size of the SMT and staff proficiency are more credible than the PPT figures when looking at SMT patch lines (the production line welding of a metaware to circuit boards), the ageing testing workshop, and the out-of-plant inspection area.
  3. Validation of customization capacity.The general rate of minor changes, such as the Logo, shell colours, key-map and system preloading applications, is required to clarify the minimum starter and modeling costs and avoid a large bill before the threshold can be found far above your expectations.

Look at the cooperation cycle.

Selecting RFID-hand-held machines is essentially a long-term partner, not a one-time commodity. Short-term price offers, long-term problem-spectrum responsiveness, sustainability of solids, and availability of spare parts over time. Asking "the future" questions at first contact is more important than getting a cheap offer.

If your project scenario is more complex -- metal environment, multi-arranged mix, hundreds of large-scale go-lives -- you need to match the factory by article at the selection stage. The one that really can do something solid, often not the one that looks best in the parameter table, but the one that's willing to tell the difference behind the parameter.