What type of rfid readers, frequency band differences and industrial scene selection points
Selective conclusion: alignment of four conditions before modeling
RFID readers come in fixed, handheld, modular, and integrated forms and in LF, HF, and UHF frequency bands. For industrial use, first align four requirements: asset material, read range, tag density, and interface protocol. The right model will then be easier to identify. Going straight to datasheets often leads to the wrong frequency or form factor and forces a complete redesign.
Technical boundary of form and frequency band
Four forms are useful. Don't mix them.
Fixed-type readers are attached to the working space or the production line entrance, which is used in conjunction with external antennas, suitable for the production line data acquisition and door-barrier; handheld screens and batteries, suitable for warehouse inventory counts, equipment inspection; small modular size, interface standards, embedded by OEM manufacturers into smart tool cabinets, most used in medical devices; integrated one-size readers and antennas are installed in a shell, simple, read-out distance, more than used in ticketing, self-help terminals, desktop scenes.
The three frequency bands are very different, and the cross-frequency selection is basically equivalent to a re-engineering.
RFID is classified as low frequency LF (125-134 kHz), high frequency HF (13.56 MHz) and UHF UHF (840-845 MHz and 920-925 MHz, commonly used frequency bands in the country).
| Frequency bands | Read/Write Range | Typical protocol | Applications |
|---|---|---|---|
| LF Low Frequency | <10 cm | ISO 11784/11785 | Animal marking, metal trace |
| HF high frequency | 10 cm – 1 m | ISO 14443、ISO 15693 | House arrest, ticketing, book management |
| UHF UHF | 1 – 10 m | ISO 18000-6C / EPC C1G2 | Storage, logistics, retail retroactive |
LF penetrates well and is largely unaffected by metal or liquids. In industry, it is commonly used to trace metal items such as tooling, fixtures, and molds. In a toolholder tracking project for a precision machine shop, LF tags read reliably when mounted on the metal toolholders, whereas HF and UHF tags could not be read.
The HFC is almost irreplaceable in short distance, in the Doca recognition scene, and NFC mobile phones can read and write ISO 14443 labels directly.
The UHF, which combines with a Circumpolar antenna, identifies hundreds of labels at a time, which are the frequency bands of the storage logistics retail industry. But the UHF electromagnetic waves reflect on metals, on liquid decay, on metal shelves, in liquid storage environments that require specialized anti-metallic tags or custom antennas. We have encountered this in fast-disapprove storage projects, where general labels are completely unreadable on metal trays, and then they are eventually solved by soft anti-metallic labels and back-to-air antennas.
Six core considerations for industrial landscape selection
- Asset material: Metals and liquids with a ratio of over 30%, priority LF or UHF programmes designed with resistance to metals.
- Label density: Single identification of more than 20 labels, recommendation to UHF and recognition of impact-resistant algorithm performance of readers.
- Move or hold?: Handheld that requires a live mobile count; fixed-reading or single-form.
- Interfaces and protocolsThe PLC line is commonly used in RS485 Modbus RRU, and the upper MES/WMS system uses TCP/IP, which requires confirmation of a contract stack supported by a reader.
- Environmental Level: Powder, oily, water fog environment with at least IP65 and work temperature range to cover field extremes, commonly -25°C to +70°C.
- Antenna Configuration: Fixed-readers select antennas with appropriate enhancements and polarization, round polarization is suitable for label orientations that are not fixed and line polarization is more permeable.
On-site validation is more important than the parameter table.
The technical parameters are so beautiful that there are many cases of inactivity.
- The reading-writing distance is usually measured in a non-disrupting environment, with six to eight discounts for the actual site.
- The metallic shelf can easily produce a multi-routing effect, and the UHF reader may have half the distance within the channel than the nominal value.
- The handheld will be significantly reduced in low temperature conditions and the outside or cold storage scenes in the north will select a wide temperature battery type.
- The label paste process is more important than the label itself, and the metal surface is bound by a special backen, which also has to be managed during the pressure and solidification time.
In the Shanghai-Shanghai-Tai-Technology Corporation ' s industrial RFID project, which has been a reference book for several years, field-speculation is the real test. From early on, only parameters were used to standard operations, and now, it's mainly driven by a few fixes.
Full path from selection to landing
A process that can be replicated: First, to confirm the frequency band (depending on the material of the asset and the distance from which it is read), then to determine the form (move, fix, embed), then to do a sample test in situ (covering at least three typical positions), and finally to run a small batch of tests one or three months before they are fully spread. Any step in the middle would be costly to skip, and the cost of the overhaul would often exceed the project’s own budget.

Ms. Lei
Mr. Pang