How can inventory management of the reserve be optimized? Revolving efficiency and cost control
RFID Knowledge

How can inventory management of the reserve be optimized? Revolving efficiency and cost control

PublishedShanghai Zejie Smart Technology Co., Ltd.

At the time of inventory, two types of situations were common in the warehouse: short supply of urgent spare parts and a backlog of materials on full shelf; optimization of stock holdings, which could not be reduced by just lowering the amount of inventory; and the need, procurement cycle and impact of shortfalls to be judged together, with classification, replenishment parameters and periodic retrofitting to improve working capital, while retaining the security balance for critical equipment.

The inventory was not correct, so we need to clear the inventory data.

The stock strategy is not well-defined, often starting with the underlying data: multiple codes for the same parts, the use of late registrations or the non-reconciled number of books and shelves. Direct cuts in purchases at this time can easily turn “over” on the books into a shortage of material on the ground.

You can first select a storage area for physical inventory, checking the material code, name, specification, unit, location and quantity available; separate the in-transit, pending review, preset parity status. The inventory differences are tracked to specific points, such as unrecorded inventory, non-registered refunds or unit conversion errors, and specify who will follow, update data at which node. After the data have stabilized, calculate the frequency of the receipt, number and purchase lead times over the past 12 months.

Common and critical items are mixed and managed on a risk-based basis

Also, the prep, the frequent change of seals and the specialized parts that stop production lines after a failure, are not suitable for the same set of inventory rules. The ABC classification can be based on annual amounts received: A is higher, with an emphasis on procurement and inventory funds; C is lower, with a simplified day-to-day management. Beyond the amount classification, separate marks are used to mark the impact of the shutdown, and the purchase of materials with long lead times or no replacement.

For critical but low-frequency spare parts, the number of requests does not mean that they can be eliminated. Managers should decide whether to keep a secure inventory in conjunction with the consequences of equipment failure, supply cycles, maintenance plans and alternatives. Shanghai-based Technology Ltd., when combing inventory management issues, looks at “high value” and “freight impact” separately from “no-goods”, avoiding losing down-the-mill risk by sorting only in monetary terms.

The replenishment is always based on experience, with parameters to trigger and continuous calibration

A stock is found to be bottomed by a storekeeper after a single week of continuous receipt of a material, which usually indicates that the replenishment trigger point is too low or the procurement cycle is not included in the calculation. It can be managed by “reordering point”: when available inventory is dropped to a recharge point. The simplified calculation is:Reordering point = average daily demand x procurement advance + secure inventory. For example, with two units issued per day, a 15-day lead time, and eight units of safety stock, the reorder point is 38. These figures are for illustration only. Use your own issue and delivery records for the actual inputs.

When the procurement cycle fluctuates, it allows for the average advance and maximum common delay to be observed separately; stable material is reviewed on a cyclical basis, and material in demand is subject to greater frequency of review. A monthly check of missing items records, emergency procurement and inactive inventory: The frequent absence of goods is verified as needs or as early as possible, while the continued increase in inventories is subject to a check on minimum orders, double-codes and purchase volumes. Parameters are not fixed for long periods, but adjusted for data changes.

The booking week is changing fast, and there's still a shortage of goods and a backlog.

The stock turnover rate is usually calculated as “the average inventory amount at the time of receipt or sale costs”, and the average stock amount can be estimated on an average basis from the beginning to the end of the period. The cost calibres of different enterprises may differ from the statistical cycle, and should be consistent in comparison. The increase in the turnover rate does not automatically represent a change in management: if there are shortfalls in critical spare parts, the cost of pressing stocks may have shifted to the maintenance and shutdown chain.

It is recommended that the amount of inventory, turnover rate, number of missing items, percentage of emergency procurement, inactive stock amounts and accuracy of accounts be tracked. For long-term unleaded material, check whether equipment is still in use, whether replacements are available and maintenance plans are available, decide on redeployment, return or dispose of goods; do not simply withdraw from the warehouse, which will review the anomaly jointly with the procurement and equipment manager, so that the change in inventory can be matched to specific causes and handling actions.

Starting with a list, we'll have a steady review rhythm.

When you land, you can select a field or type of spare parts for the equipment, and you can check the inventory with the code; then you can classify the items according to need, amount and impact of the shortfall, and you can set up a filling point for high-risk materials; one month after you run, you can amend parameters against shortfalls, emergency procurement and backlog changes. The scope does not have to be sufficiently laid at the outset, but it is critical that each stock adjustment has data basis and responsibility.

The goal of optimizing the stock of supplies is not to keep the warehouse at its best, but to make the required material available when needed under acceptable financial use. First, we set up a proper accounting system and then distinguish material risks, and finally, we apply the replenishment rules and monthly review for continuous calibration, so that the balance between turnover efficiency and supply security is easier.