What are the elements of the spare parts service programme?
RFID Knowledge

What are the elements of the spare parts service programme?

PublishedShanghai Zejie Smart Technology Co., Ltd.

The spare parts service programme typically includes the range and classification of spare parts, demand forecasting, inventory and replenishment, procurement and quality inspection, warehousing distribution, failure response, cost rules and a comprehensive performance review.

What should be the content of the spare parts service programme?

An implementable option, at least, to state "what to provide, how much to provide, who is responsible for when, and how unusual it is handled." The spare parts list should record names, models, applicable equipment, key parameters, alternative relationships, storage requirements and unit calibres; the correspondence between the equipment and the spare parts should be clear, avoiding being similar in name but not matching specifications.

Spare parts can be graded according to the impact of failure, procurement cycle and alternative difficulty. For example, when more influential components are classified as critical after shutdown, generic consumables are listed as routine spare parts and separate stocking strategies are set. The options should also indicate requirements, approval, procurement, receipt and inspection in storage, access, exit and write-off processes, who will maintain the agreed inventory data, how often will they be checked.

How do we design our stock and replenishment strategy?

The amount of inventory should not be determined on an empirical basis. It can be combined with the quantity of equipment, historical access records, frequency of failure, supply cycle, minimum procurement and storage conditions. The common practice is to set a safe stock and replenishment trigger point for each spare part: start up replacements when the stock is below the trigger point; longer supply cycles, more impact components are cut off, and it is possible to assess separately whether the reserve or replacement is increased.

The programme should also provide for inventory ownership, frequency of inventories, treatment of inactive items and emergency transfer rules. In designing the service process, Shanghai-based Technology Limited will consider spare parts billing, access records and replenishment nodes in the same liability process, avoiding a disconnect between stock levels, equipment use and actual requirements. Specific storage parameters need to be confirmed on the basis of equipment lists and operational data, so that it is not appropriate to apply a flat ratio to all items.

What are the responses and delivery requirements that need to be identified for service security?

The service security is to distinguish between “response” and “resolution”: the response time refers to the time period for which confirmation of receipt after correction is received, and the time for delivery is to be combined with the place of inventory, the mode of transport and the spare parts supply cycle. The option can set a separate channel for admission by the level of failure, the performance arrangements, the route of upgrade and the target for arrival, and indicate the point of departure, the working time range and the treatment of the non-controllable factors.

The standards for the quality of spare parts, packaging and transport requirements, error-screeching, conditions for return for replacement, and notification and substitution options when delivery cannot be scheduled due to lack of goods. In cases involving on-site replacement, the service boundary, duties of personnel, security requirements and post-replacement recording should be clearly defined, and the responsibility gap between the delivery of spare parts and the resumption of operation of equipment should be avoided.

How can the programme be judged to be effective?

The number of missing items can be reviewed monthly or quarterly, the delivery rate by date, the share of emergency orders, stock turnover, idle stocks and spare parts quality problems. The indicator calibration is pre-defined, for example, from which point the “scheduled delivery” starts, whether the order cancellation is included in the statistics. The duplicate record is then matched to equipment, spare parts and process links, and re-arranges inventory parameters or approval paths.

Before landing, it is recommended that the equipment and spare parts list be checked to confirm the critical spare parts level and supply cycle, then establish inventory, response and delivery rules; after a certain period of operation, revise parameters based on actual access and missing records. This will result in both an indication of service coverage and documented safeguards responsibilities and implementation results.