What are the elements of the spare parts inventory management programme? Design and implementation
A spare parts warehouse plan needs workable rules for keeping essential parts available, avoiding excess inventory, and finding parts quickly. A complete plan generally covers ten areas, including classification and coding, location planning, stocking policies, receiving, issuing and counting workflows, IT tools, slow-moving stock, performance measurement, and phased implementation. We'll cover them in turn.
Element 1: Make a needs ranking before deciding how to manage - classification and coding
The classification is not by material name, but by three dimensions of "failure impact x annual consumption amount". The common practice is to divide spare parts into A, B and C levels: category A is a critical loss of one hour for the cut-off period, and category B is more than one month for the purchase cycle, and category B is important but not fatal, and medium for the procurement cycle, and class C is a consumption and low value. A typical distribution is around 15 per cent of SKU volume in category A, which takes up about 70 per cent of the funds; category C accounts for approximately 50 per cent of SKU and less than 10 per cent of the funds are occupied.
The code should be balanced with "good for you" and "good for you".
The code suggests a phased structure of 8 to 12 bits, such as "Ecclement Category - Large Components - Specifications - Series", each fixed-digit number, and avoid confusion about naming. What we see when combing the coding system is: the original code is a long line of pure numbers, it's difficult for users to remember every paragraph, re-numbering and adding letters-aids, and the time for checking is significantly shorter. Once the code has been fixed, the other way is to change, otherwise historical data is not right, and the account is confused.
Point 2: The plan for the storage is to get a line of work and clear it.
More storage locations are not necessarily better. What matters is that staff find things quickly and count them accurately. Put frequently used parts on shelves between waist and chest height, bulky slow-moving items on upper racks or stacked on the floor, and moisture- or static-sensitive items in dedicated areas. High-bay warehouses can make two to three times better use of space than conventional single-level warehouses, but cost more upfront. Shelving and electronic tags are usually enough for small and midsize businesses.
And the coding of the library should be kept uniform.
Location codes often use five two-digit segments: zone, aisle, column, level, and position. Open a spare part record to see its exact location. Location changes must go through a transfer order, not a verbal instruction, or the books will never match reality. Shanghai Zejie has seen this at several plants: materials are casually moved without updating the location register, creating widespread count discrepancies.
Element 3: Clear inventory levels - safe stock and replenishment model
Do not guess at safety stock. A common formula is SS = Z × σ × √L, where Z is the factor for the chosen service level (1.65 corresponds to about 95%), σ is the standard deviation of daily consumption, and L is purchasing lead time in days. For items with variable lead times, such as imported spare parts, use the historical maximum for L rather than the average to avoid running out.
Separate the place of completion from the order
The reorder point (ROP) is average daily consumption × lead time + safety stock. Economic order quantity (EOQ) is √(2DS/H), where D is annual demand, S is the cost per order, and H is annual holding cost per unit. For Class A spares, where stockouts are costly, the order quantity can be 20%–30% above EOQ. For Class C, stick to EOQ and don't build excess stock.
Point 4: Access to the library and inventory should be written into a line of processes that are willing to be implemented
The library is to be filled in four steps, "Receiving-Access-Package-Up-Record", and the receipt and inspection must check specifications, quantity, appearance and accompanying files, and none of them can be signed. The collection is to be taken out of the vault, and emergency requests are to be made after the event, but it will have to be completed within 24 hours, otherwise the account will never match.
The count frequency is graded by material
The cycle count is more suitable for daily correction than the annual large disk - drawing between 5 and 10 per cent of SKU per day or week, and checking the reasons for discrepancies immediately. The inventory accuracy rate is a core indicator of the health of the spare parts bank, and solid factories in the industry can stabilize at over 99.5 per cent, often less than 95 per cent, for reasons that are mostly not operational, but because of the unencumbered and unreviewed storage space.
Element 5: Information is a skeleton, not face - system support.
Spare parts management requires at least these types of functionality: material master data, access to the warehouse documents, inventory queries, statements, inventory modules. If an ERP already exists, you can first type it through the ERP spare parts module; if not, a package covering bar-coded guns and light storage implementation systems will be sufficient. Sweeps must replace handwritten documentation, otherwise data entering the system is dirty.
Pre-end data capture accuracy determines system value
Many people are on the system but not working because of roughness in front-end collections. For example, when you take a lead, you sweep the material code, you don't clean the storage number, you don't know which store position, and it's just a mess. The standard is that every material move corresponds to "material code + warehouse bit code + quantity + time + operator" and one element is not possible.
Point 6: The project is to be implemented in four steps, and not to push the whole plant as soon as it gets up.
The complete implementation path proposal is: Current research – Program design – Pilot operation (one to two months) – Full roll-out. The research phase will map the existing SKU numbers, stock levels, idle ratios, and the accuracy of the inventory, which cannot be measured in the future. The pilot proposal will select a line or workshop that covers one or two full business cycles, and then expands on the process.
Training and synchronisation on line
The training of a first-line bank manager must cover at least three days, including system operations, document flow, and abnormal processing. The test indicators can be used to include monthly performance, such as the count accuracy rate, the system documentation timeliness rate, the time frame for the process of idle items, etc., so that rules are really binding.
Point 7: Do not leave a tail behind on the stagnating and decommissioned management
The most feared of the spare parts bank is that it will accumulate more and become a "sculpable fossil" for small warehouses. It is recommended that each quarter, with more than 180 days of unused spare parts automatically entered the candidate list, and that the method of disposal be evaluated jointly by technology and procurement: transfers, refunds, and no end-of-life process. Many companies can take up more than 10% of the total inventory when they first clear their stagnating items, and release the storage and money to improve the management accuracy of the flow.
The essence of the spare parts management programme is to translate experience into rules, put rules into systems and optimize system use. Design phases are designed to clarify classification and coding, pilot and roll-out at the implementation stage, focus on accuracy and stagnation during the operational phase, which last one year, and where overall inventory funding can usually be reduced by 15 to 25 per cent, while spare parts supply response times are reduced by almost half.

Ms. Lei
Mr. Pang