How does the spare parts warehouse management system work?
RFID Knowledge

How does the spare parts warehouse management system work?

PublishedShanghai Zejie Smart Technology Co., Ltd.

What exactly is the content of the spare parts warehouse management system?

A ready-to-departure warehouse management system, with three answers: who will take care of it, how to do it, what to do. Specifically, the body of the system usually contains general rules (purposes, scope of application, criteria for reference), organization and responsibilities (warehouse managers, planners, warehousekeepers, recipients, each doing what), business processes (plans, procurement, storage, storage, inventory, end-of-life), security management and 5S (collating, cleaning, cleaning, maintenance) requirements, examination and improvement mechanisms, but each one has to be written in such a way that new staff can follow them.

How should the framework of the system document be framed?

Use a structure of one set of general provisions, four main sections, and one appendix. Keep the total to 3,000-5,000 Chinese characters. If it is too short, it will not be practical to implement; if it is too long, no one will read it.

The annex proposes to attach four tables of the Security Inventory and Maximum Stock Set-up Table, the Inventory Recording Form, and the Accessory Document Template to make the system " visible " to " functional " .

What are the warehouse managers, planners and warehousekeepers responsible for?

The division of duties is the lifeline of the system, and the more it gets, the less difficult it is to be implemented. Here's a three-job division that is common to a 500 million-dollar manufacturing firm, you can grow or decrease by the size of your own business.

Position Core responsibilities Daily Output
Warehouse Officer Integrated warehousing planning, development and revision of systems, monitoring KPI, organizational inventory and audit, staff scheduling and training Monthly warehousing reports, stocktaking summaries, improvement options
Spare parts planners Procurement plans based on equipment PM (preventive maintenance) plan and historical consumption data, establishment of secure and maximum stocks, follow-up on arrival Procurement request forms, security inventory forms, monthly plan deviation analysis
Warden. Responsible for physical receipt and delivery, storage management, maintenance of inventory, document entry and system accounting, assistance in inventory count Access to warehouse, inventory cards, inventory forms, maintenance records
Recipient (shop/maintenance) Submit applications, standard use and as required withdrawals by the lead process The receipt, the refund, the emergency receipt description

Many companies ignore the duties of the "header" side, which leads to a system that only binds warehouses, requests on demand and takes them out. It is recommended that the system be clear: receipt forms must contain equipment numbers, worksheet numbers (maintenance order number), use, emergency receipt after 24 hours.

What are the most vulnerable problems in the entry chain? How can we regulate them?

The high frequency (HF) problem of entering the library is concentrated in three places: documents are not physically consistent, batches are mixed and acceptances are overloaded.

  1. Pre-registration of arrivalThe procurement officer advises the warehouser 24 hours before the arrival of spare parts and the warehouseman prepares the position and receiving and inspection tools in advance.
  2. Document reconciliation:: Reconcile purchase orders, delivery orders and contract alignments, including material code, specification type, quantity, supplier, batch number.
  3. Physical acceptance and inspection(b) Appearance check (in good packaging, non-defatigable, no tact), quantitative count (on a piece-by-part or by packing unit, which is generally not less than 10%), and critical spare parts require size or functional speculation (e.g. bearings, seals).
  4. System Entry: A unique bar code or RFID tag is generated, printed and posted using WMS (Stockroom Management System) or ERP (Enterprise Resource Plan System) modules.
  5. Up and up.: In principle, by "parts, classes, places", so that "one person, one card" and the coding of the bank would suggest a four-part "Zone-Deal-Stand-Stand-Strategic" format.

What is easily missing from the exercise is step 3 test requirements. We met with a customer who was working on food machinery, and the bearings were only taken for visual inspection, and a group of retrofits were stored in new products, causing two unplanned stoppages of production lines. They then added to the system "a unit price of over $500 or spare parts for critical equipment must be 100% spotted" before the problem is solved.

What's the particle level of the process?

The core of the outlet is the principles of "first-in-first" and "bills." FIFO means first-in-first-out spare parts, which avoid long backlogs leading to lapses; voucher issuance requires that every outlet is supported by a retroactive document.

In terms of implementation, the following elements are to be included in the system:

The system recommends that the recipient fill in a "placed" field to facilitate subsequent tracking and inventory.

What would stock count do to keep it from being formal?

The inventory is the ultimate means of verifying the conformity of accounts and the core catcher in identifying management gaps. It is recommended that the system identify the frequency and execution of three such counts:

The reasonable objective of the reconciliation rate is to: A category 99.5% or more, B 99% or C (low-value, low-cost, low-cost) 95% or more. Unable to do so will be to analyse the reasons, pursue people and revise the precautionary measures. Shanghai-based Sieux Tech will help them to separate the count results from "normal wear" and "management error" and "risk fraud" in order to avoid one cut.

How do we determine the safe and maximum stock of spare parts?

Secure inventory (also known as insurance stock) is an additional stock held in response to fluctuations in demand or supply delays.

  1. Experience Law: Security inventory = average daily consumption x arrival cycle x 1.5, simple but broad enough to fit small warehouses with insufficient data accumulation.
  2. Statistics Act: Safety stock = Z × σ × √L, where Z is the service factor (typically 1.65, corresponding to a 95% probability of avoiding stockouts), σ is the standard deviation of daily consumption, and L is purchasing lead time in days from purchase order to delivery.
  3. ABC ClassificationCategory A spare parts are accurately calculated by statistical method, category B is set by empirical method and category C is simply prepared on a monthly basis.

The maximum inventory is generally set at a secure stock plus normal consumption for a procurement cycle, so as to avoid the use of funds in an inventory. The system recommends that "overdue warning" and "disable (long-term unused spare parts) disposal mechanisms" be established simultaneously, such as automatic entry into the end-of-life review process of 12 months unused spare parts.

Is an information system necessary?

WMS is not necessarily necessary, but it must be electronically recorded and traced. Small warehouses can run with a combination of Excel + barcoded guns, which is the key to "the day the document is entered, the account is updated in real time, the account is ready for inspection."

If the budget allows, spare parts SKU (class) exceed 500 or more than 5,000 times a year in access to storage, it is recommended that they be on WMS or ERP storage modules. The selection focuses on four capabilities: batch management and first-in-first-out control, warehouse position management, report and early warning (ceiling floor/ceiling, overstay), interface with equipment PM programs.

The system is a tool, and it has to be clear that the system's privileges are graded: the warehousekeeper only has the right to receive and send goods; the planner has the right to inventory queries and adjustments; the supervisor has the right to audit and take stock; the finance has the right to query and monitor; and the risk of data distortion due to one person's plethora of powers is avoided.

How can you guarantee that the system will be implemented when it is finished?

The key to the system's landing is three things: training, appraisal, and re-discussion.

Another point often overlooked is a system of incentives and penalties. Specify in the policy that employees who meet their KPIs for three months running earn additional performance points. If a discrepancy between the register and physical assets causes a loss due to human error, deduct 10%–30% of the loss from performance pay. Deal with serious cases under the company's disciplinary policy. Clear rewards and consequences make the policy enforceable.

And, at the end of the day, I'll give you a few direct suggestions.

First, the first draft of the system does not seek perfection, running and then overtime. V1.0 versions can cover core processes with only 2000 words, and are revised to V1.1 three months after landing on the basis of actual feedback.

Second, the duties of the post must be written to the position and not to the department, and it is said that "the Warden's Officer Zhang Li-Feng can do all the work" and "The Warden's Position" are completely different from the one performed.

Third, document templates and KPI forms are published as annexes to the body of the system, avoiding a set of actual runnings in the system.

Fourth, the system is signed by warehousing, use department, procurement, finance and legal committee and, if necessary, external consultants are required to perform a compliance review, particularly in warehouses involving dangerous chemicals, pressure container spare parts.

Fifth, at least once a year, the system is thoroughly reviewed and specific revisions are initiated whenever the external environment changes (e.g. new regulations, new technologies, new business models).