nfc Technical options against metal labels and selected elements
The metal environment should give priority to the anti-metal structure with a magnetic compartment; non-metallic surfaces can select general labels, and costs and thickness are usually more manageable.
Cost: General labels are cheap, metal tags are expensive in structure and testing
The normal NFC labels are usually composed of chips, antennas and base materials, suitable for paper, plastics, glass, non-metallic surfaces such as wood. On this basis, anti-metal labels add iron oxygen or other magnetic separators to reduce the vortex and discomfort effects of metals on 13.56 MHz radio frequency antennas, so material, molars, sealing and testing costs increase.
The cost cannot be judged by a single label price alone, but also by four configurations:
- Chip capacity:Small capacity is usually sufficient when only numbering is written; if you want to store web sites, equipment parameters or multilingual information, you need to check the user-usable storage space.
- Label size:The smaller the antenna, the more limited it is to read and write distance and to have a wrong direction. Smaller design often requires a more sophisticated matching debugging.
- Isolation layer thickness:The thickness and structure of the sequestered material can affect effects when the metal is large, installed close to or has a greater curvature.
- Seal mode:Indoor plane-based laminates may be made of film or non-dry glue structures; outdoor, oil-contaminated, wet and frequent collision environments usually require hard shell or encapsulation designs.
When you purchase, you can unplug the costs into "labelling body, printing code, installing assistive materials, reading and writing equipment, field testing." In your program communication, Shanghai-based Technological Co. Ltd. usually identifies the medium and environment for use, then label sizes and seals, avoiding first styling by low cost general labels, and then redeveloping it after the metal is not in harmony.
Source: The NFC technical information and radio frequency tag engineering information, 2024. Specific unit prices vary with chips, sizes, quantities, processes and seals, and it is not appropriate to replace the selected type with a single price.
Effect: Readable, not only by the chip model
The core of anti-metal labels is not "Put the general label on the metal" but change the electromagnetic coupling between the antenna and the metal by magnetically separator. The NFC works at a normal 13.56 MHz, with frequent applications involving close reading and writing, NDEF data exchange and device recognition; final performance of the label is also influenced by the reader power, antenna size, label direction, metal area and installation gap.
| Comparative items | Normal NFC Tag | Anti-metal NFC label |
|---|---|---|
| Applies surface | Non-metallic surfaces | Metal or complex mixed surface |
| Main structure | Chips, antennas, base materials | Chips, antennas, magnetic separator layers, containment layers |
| Thickness Control | It's usually easier to make thinner. | Need to set aside space for the silo and protective layer |
| The test focus. | Distance, direction, batch consistency | Size, position of loading, direction, distance and environmental change |
Read-and-write distance is based on the actual reading/writing time and installed status, and cannot be viewed only with an empty range of chip or label parameters. The test is to be carried out using a fixed reader, a fixed label position and a fixed angle, testing positive, deviating, different reading-and-writing distances and number of consecutive readings. For example, 100 consecutive reading-and-writing times, recording success, average response time and the direction of the label at the time of failure, and then comparing this test to the target value on the ground. This test is a project validation proposal, and the specific criteria are set according to the project needs.
If the label needs to be written on a web site or text, it should be confirmed whether the chip supports target data formats; if used for asset identification, it should also distinguish between " reading the unique number " and " authenticating the data. " Ordinary UID reading is not equivalent to encryption authentication, which involves protection against copying, tampering, additional assessment of the chip security function and backstage validation.
Source: Open NFC Data Exchange Format Information, Radio Frequency Identification Engineering Tests 2024. Read-and-write distance, success rate and response time should be based on specific samples, equipment and field environment test results.
Apply scenario: First look at the installation of the medium, then look at functional needs
Suitable for regular NFC labels
The labels are placed on the box, plastic case, glass panel or wood item, and when reading and writing distance is not required, it is usually more appropriate. For example, a label on information material, a description of products on non-metal packaging, an introduction to displays and instructions for equipment operations, with emphasis on thinness, lightness, easy printing, anti-metallic structures do not have any significant benefits.
Suitable for NFC labels
Metal tools, cabinets, shelves, steel bottles, mechanical parts, aluminium casings and metal flooring assets should be evaluated. If the label is placed on arc, in an angle or in a dent, it must also be confirmed whether the label is bent, if the magnetosphere is broken, and if the reader is able to access the active area.
The selection may be confirmed in the following order:
- Recording of material to be put on the sticker, metal area, surface curvature and label installation.
- Determines whether to read and write by a mobile phone, at close range, or only by means of a fixed reader, or by writing.
- Identification of chip protocols, storage capacity, locking and data security requirements.
- The labels are defined in terms of their shape, thickness, glue, temperature tolerance range and water-resistant oil requirements.
- Small batch tests are performed on actual metal samples to determine the specification of the volume.
Mobile-based access is usually more dependent on the location of the label relative to the cell-phone antenna; fixed-readers are more concerned with the antenna matching, power setting and space. The test results for both types of equipment cannot be directly substituted for each other, and sample acceptance should use as much as possible the equipment planned for the field.
Common pits: parameters that look appropriate and may fail to function after loading
- The general labels are attached directly to the metal:Metals change antenna resistance, leading to lower reading and writing distance, more sensitive direction, or even less able to start.
- Test naked labels only:The actual results are altered by the separation layer, glue, spray, protective shells and metal backboards, which should be tested for full fitting.
- Ignore label direction:The relative direction of the label antenna and the reader antenna affects the coupling.
- Focusing on chip capacity only:Sufficient capacity does not represent reading distance, patience and security functionality to meet requirements, and chips, antennas, and seals must be assessed as a whole.
- The adhesive selection is too simple:If necessary, you should be tested for high and low temperature, wet heat and stripping.
- The UID is used as a security certificate:UID is suitable for basic identification, but cannot assume full security responsibilities for the anti-replicative scene alone.
If you can read at a close distance, but not read at a small point, then you usually check the size of the label, the antenna match, the position of the isolation layer, the reading and writing power and the direction of the installation, instead of replacing the larger-capacity chip directly. If there is a difference in the same batch label performance, you should also check the modulate size, the consistency of magnetic material, the thickness of the film and the pressure on the containment.
Conclusion: specification is determined with actual installation status
Non-metal surfaces, thin and low cost preference, a regular NFC label may be used as the starting point; metal surfaces, complex envelopes or needing to be read at a steady close range, should select an anti-metallic label with magnetic separator. At least protocol and capacity confirmation is completed before specification is determined, sample loading tests are performed, orientation and distance tests are tested, and environmental tests are four steps. Do not rely solely on the chip model or empty reading margin lower list, ultimately using test records in full assembly status as the basis for selection.

Ms. Lei
Mr. Pang