M1 card material and application principles: comprehensive reading
The quality of the M1 card has an impact on the bend, printing and useful life, but it cannot be separately stated whether the information is secure.
The card's endurance and the certificate are two quality lines.
The chip, antenna and laminate structure decide on reading and writing performance, while the terminal and backstage decide on authentication and authorization. Even if the card is perfect, outdated key strategies may expose operations to risk.
The market is commonly called not as complete. Security-sensitive scenarios should be checked for specific chip information and migration programmes, rather than simply "M1 Compatible".
The card must be identified, the rights and interests transferred and the old document revoked. Increasing the life of the material alone will not prevent the old card from continuing to be valid, but only will the authorized security be considered and the physical wear and tear of high-frequency use not be overlooked.
Situations requiring early verification
The physical card test is passed, and the old card after the patch is still offline, which means that quality is not a problem in the card. Only by separating the physical durability from the permission life cycle can you avoid producing a very good card, mistakenly considering a secure voucher system.
It's recommended that this be verified.
The grinding and decomposition tests, together with lost or missing cards and divestiture tests, are conducted in parallel to each other, resulting in a reviewable acceptance result.
It is recommended that you use a physical terminal to validate the code, read cards, abnormally hung and filled card processes, and then try to bend, wear or tear, and clean.
Card materials, information carriers and business vouchers should be selected separately
Magnetic, bar code, contact chip and non-exposure chips are different information carriers and PVC materials are only part of the card.
Production quality should be accepted and accepted along with the certificate life cycle
When the card is delivered, it undergoes distribution, commissioning, hanging, replacement and exit. These conditions are not necessarily linked to the integrity of the physical card. The design should clearly link the card number, electronic identification and back-office identity, and specify which information allows for change. Individualized mass production also requires that the face of the card is not mislocated with electronic data.
From demonstration to delivery, what evidence is needed
| Observation dimensions | Evidence to be retained |
|---|---|
| Information carrier | Card materials are identified separately from chip/magnetic strip capabilities |
| Production consistency | Print, coding and readable information |
| Service cycle | Back-up cards, loss of hangers and batch retroactive schemes |
| This is the key trade-off. | Would the delivery of a durable card by the supplier mean that the system has acquired a credible identity? |
It's worth asking.
Would the delivery of a durable card by the supplier mean that the system has acquired a credible identity?

Ms. Lei
Mr. Pang