How does the fixed asset RFID management system work?
RFID Knowledge

How does the fixed asset RFID management system work?

PublishedShanghai Zejie Smart Technology Co., Ltd.

The core of the RFID fixed asset management system is to transform "researching" into "assets reporting" using electronic labels. Whether a system can really be used is often determined not by the type of reader or antenna, but by whether the pre-existing data set and field processes are in place.

Before the system goes online, get the data right.

RFID is only a means of reading, and it is the asset master data behind which the system is based. It is suggested that at least two to three weeks be set aside before the system is operational for a special round of asset accounting.

At least the following information should be confirmed:

If the specifications of the same type of equipment differ slightly, do not compile a single record for the sake of economy.

Point 1: How to choose the label and how to put it

Two common types of HF (high frequency, 13.56 MHz) and UHF (UHF, 860-960 MHz). Much more than UHF is used in fixed asset management, which is characterized by long distances, multiple labels and readable at the same time, with a single second to read dozens of to hundreds of labels that are suitable for rapid inventory.

Selecting and labelling, several details are often ignored:

After the tag is completed, it is important to have the asset number attached to each of the codes and to take a photo on site and file it for subsequent verification of the label location.

Point 2: The routine is about "cleaning."

The process can be triggered by a sweep code for the type of HF that is used, returned, transferred or scrapped.

Critical: Each change of status must be recorded with a sweep code, and manual entry fields should be minimized. The system can bring information directly from the scan, so no operator is allowed to enter it twice.

Point 3: Counting process. How does PDA finish a circle?

The inventory is the most valuable part of the RFID fixed asset system. Traditional inventory counts are carried by people with books to the physical, and it may take one or two days for hundreds of assets in a warehouse; using PDA to walk, the same workload usually shrinks to about two hours.

In four steps:

  1. Before the count: Leads field count tasks in the system, grouped by department, floor or area and assigned to different inventory clerks
  2. Site scanThe inventory officer follows the predefined route of PDA, with a full scan every entering room, which covers the region ' s labels by 5 to 10 seconds; and a single scanning point for unreadable assets
  3. Data Return: PDA sends the inventory results back to the server via WiFi or 4G; where no network exists, data are stored locally and then uploaded back to the office
  4. Reconciliation of variances: System automatically compares the results with the results of the reconciliation, and the three types of anomalies are exported for "no real account" and verified by asset managers on an article-by-article basis

In warehouses or large workshops, it is advisable to go back in advance and avoid frequent human flowways and powerful sources of electromagnetic interference (e.g. large electrics, transformer cabinets). RFID has a higher reading range in a metal-reflective environment.

Point 4: Unusual treatment, three most common issues

Altruistic 1: Label cannot read.

Aberrant 2: Sweep the label, but not against the system.

Exception 3: On the books but physically missing

In response to these anomalies, it is standard practice to create an "unusual register" that records the time, location, preliminary judgement and treatment of the discovery. After several months of data accumulation, it is clear what kind of problems are frequent, where they are concentrated.

Shanghai-based Cheeky Way Technologies has dealt with this situation in the service of clients: "The books are empty" for three months at the beginning of a manufacturing customer's warehouse, and it was traced back to the end-of-life process that went off without a system sweep, which then forced a sweep at the end-of-life, and the problem basically disappeared.

Point 5: The details that really make the system work

End

The real value of the RFID fixed asset management system is not complicated: clean up data, then put labels on the right side, go-through the wiring, take a count by process, and file unusual. If only hardware is bought, without process matching, the system will always return to manual books. Moving on as project milestones in five cases above, it usually shows a significant decrease in the difference between three and six months.