What about the blast-proof rfid handheld?
A lot of people think "blast" and "water and dust."
When choosing an explosion-protected RFID handheld, a common mistake is to treat 'explosion protection' as a catch-all designation. These are two distinct systems. Explosion protection coversThe machine itself cannot be the source of detonation.Like a circuit that fires, surface temperature over-standards; the protection is...Can the machine carry water, dust and fall?In a chemical plant in a flammable gas environment, the machine is useless if it does not explode, and the higher IP level is useless; in a wet storage area, on the other hand, an unwaterproof device will soon fail. The two systems pass through simultaneously, so that the equipment can work in the same scene. Below is a clear selection from blast-resistant levels, IP protection, RFID performance, which matches four layers.
The blast level is not as high as possible. It's the scenery.
The bomb-proofing device will have a similar set on it or a sign. Ex ib IIB T4 Gb The characters, they look like a lie.
- Ex: general sign of blast-proof electrical equipment
- ib / ia: This is an Antenna class, ia higher than ib, ia can be used in 0 (continuous environment of explosive gases), b more for 1
- IIB / IICGas grouping, IIC covers the most dangerous gases such as hydrogen gas, acetylene, IB covers ethylene, etc.
- T4 / T5 / T6: Maximum equipment surface temperature: T4 ≤135°C, T5 ≤100°C, and T6 ≤85°C. A lower maximum temperature means greater safety.
- Gb / DaEquipment Protection Level (EPL), Gb Correspond gas environment, Da Correspond dust environment
The actual selection does not have to be done in one place, just do one thing.Clear the area classification to be used for the equipment. The site's reaction near Pu, the oil discharge area at the gas station, and the prying area of the gas platform are mostly 1 or 2 sectors, corresponding to Ex ib IIB T4 Gb Most times, you can meet. If it's under a coal mine, you need to use it. Ex ia I Ma(I for mineral use). High dust feed plants, flour mills, need to see Ex tb IIIA T130℃ Db Such dust-proof blast markings cannot be used for gas-resistant explosive mixing.
The blast level is not higher and more safe.Overrated equipment tends to be larger and more expensive.And the handshake is not very friendly to the operator. When we choose a client, they will first provide them with an on-site hazard map that is more realistic than simply chasing a higher grade.
IP protection level, two numbers each.
IP (Ingress Protection) is followed by two digits, as in IP65 and IP67. The first digit indicates dust protection on a scale of 0 to 6, with 6 the highest rating, meaning dust-tight. The second indicates water protection on a scale of 0 to 9. Higher numbers indicate resistance to more demanding water exposure.
| IP Level | Dustproof. | Waterproof. | Typical application |
|---|---|---|---|
| IP65 | It's completely dustproof. | ♪ And wash it without fear | Inspection of outdoor canning areas, general chemical plants |
| IP66 | It's completely dustproof. | Water column flush | Maritime platform, ship deck |
| IP67 | It's completely dustproof. | Short-term impregnation 1 m | It could be a short time before it falls into the water. |
| IP68 | It's completely dustproof. | Continuous leaching (see specific definition) | Extreme humid work |
And to be aware, the IP level is...The whole secret seal function.The blast-proofing certificate indicates two sets of independent tests, one not a single.
RFID, read and write key parameters. Don't just look at "can you sweep it?"
Also labeled as "RFID Handheld", performance varies significantly. The following parameters determine whether a device can actually work in a dense label environment:
- Frequency bands: The main domestic phenomenon is the UHF (902-928 MHz), with a few scenarios using HF (13.56 MHz) and the wrong-selection segment not reading labels
- Read Distance: General UHF handheld without the help of a support antenna, reading distance between 3-8 metres, which means that a shelf can be counted without a handpad
- Group Read Rate: the ability to identify multiple labels at a time, where industry scenarios typically require more than 50 sheets per second, with significant gaps in label intensity
- Consistency of protocols: EPC Class 1 Gen 2 / ISO 18000-63 is the dominant industry, almost all UHF labels are compatible
- Antenna design: Internal rounded antennas to facilitate the scanning of shelves, external high-benefit antennas suitable for remote reading
If the site is located mostly in large swinger boxes, pallet positioning, priority is given to external antennas; if the shelf is dense and bending fast-tracked, it will experience better internal antennas.
Configure the rewinding device by using the scene
Core claims for equipment vary widely from industry to industry, with a rewinding of the scenes and more symmetrical than price reverses:
Chemical and petrochemical inspection
The typical characteristic of the reaction zone, the storage area, is corrosive gas + liquid splatter + occasional spark. Ex ib IIB T4 GbAt least, it's protected. IP65. Handheld shell preference is given to engineering plastic or stainless steel, avoiding corrosive materials such as aluminium magnesium alloy. The screen is visible under strong light and resolution is not less than 720 P.
Gas fields and gas stations
If you need a lot of water fog to flush out, you can use the equipment and be able to use it.IP66 Steady. Read and write within a normal distance of 5 m, focusing on re-entry and the touch screen response under gloves.
Pharmaceuticals, food clean zones
The clean zone is more explosive than heavy material, which can be sterilised and less clogged. Ex tb This is particularly important in flour, sugar and milk mills.
Under the coal mine.
It has to be used. Ex ia I MaRFID is primarily for the location of personnel and vehicle movements, with low reading and writing distance requirements but extremely demanding for protection against falling, waterproofing and re-routing.
Warehousing logistics distribution
Most are used in general warehouses, with weak blast-proof requirements, with a greater emphasis on the speed of sweep codes, the flow of operating systems and the docking capacity of the warehouse management system (WMS).
Five-step selection of a real-life model.
The following is a simple example of the work that can be done:
- Set a dangerous area.. The plant provides a map of the hazard area, identifying zone 0, region 1 or zone 2, gas or dust environment. This step directly determines how the blast marking is written.
- And then look at the level of protection.There's no wash, damp, drop risk at the scene, and it determines the lower limit of the IP grade.
- Assess RFID needs. What type of label is the inventory, how far away, a one-time sweep or group reading?
- Seeing the re-entry and operational experience.. Battery capacity is recommended above 6700 mAh, and continuous scanning 8 hours is a common requirement; screens are readable in sunlight and thick gloves are also operational.
- Checking software interface. The operational system of the handheld (Android / Windows) needs to be able to interface with existing ERPs/WMS and the development of an interface will determine the cost of subsequent deployment.
And in the end, it's more important to choose blast-proof equipment and to certify it than to read advertising.
The compliance of blast-proofing equipment is a matter of production safety, and the three documents must be selected for authenticity and validity:Blast clearance(indicated by a State-accredited blast inspection agency)CMC Metrology Type Approval(if used for statutory measurement scenarios)Inspection report for the factoryIt's very difficult to find out just when the supplier says "blastproof."
Shanghai-based technology has reached out to customers in different environments, such as chemical plants, gas stations and coal mines, and it is not a little too much of an impact experience, but rather a little bit of a higher parameter.Whether the blast-resistant, IP protection, RFID performance match the scene or notAnd if the follow-up system is smooth. Assessing these four things together, it is easier to choose a device that works well than to pursue a single indicator.

Ms. Lei
Mr. Pang