How to install the rfid walkie-talkie and analyze the points of personnel and material control.
Set the right position. The debugging effort will save half.
Reliable RFID portal reads depend about 30% on the device and 70% on installation. We've seen repeatedly that even a portal optimized under factory settings can drop below a 70% read rate if placed incorrectly on site. Get the location right first. Confirm the following points before installation.
The net width of the channel is generally between 60 and 90 centimetres, which can guarantee normal movement of a single person and complete coverage of the radiation field on both sides of the antenna. If it is a metal door frame or stainless steel fence, the antenna will leave the surface of the metal at least 30 centimeters, otherwise the metal will reflect the frequency energy into a wave, creating a local reading blind zone.
The walkway is designed to avoid elevators, powerful electrical distribution tanks, and the trans-frequency, these powerful sources of electromagnetic interference, maintain a distance above 1.5 metres. The intervalid between the read antenna and labels, which are essentially based on a combination of electromagnetic waves, the cleaner the electromagnetic environment around them, the more stable it is identified. If the tunnel must be located near a weak well or equipment room, priority will be given to the liding of the wall.
The two-way read-through channel is required, and at least 2.5 metres between the two walkways to avoid a string of readings. The swab of readings is: A channel antenna reads people who have not yet entered the channel, B channels read them, and then they create duplicate records.
Antenna polarization and label direction.
The RFID label is a coupling device for antennas, and energy transfer efficiency is highest only when the polarization direction of the antenna and the sensor circle of the tag chip are relatively vertical.
In people's corridors, people usually wear a breast card label and head in the direction of moving (i.e. facing the passer-by). In this case, the line polarized antenna on both sides of the tunnel is installed horizontally, with the labels on the front, straight across the antenna, with the highest success rate of reading. If the antenna is vertically installed, the chest is stuck to the body, and it's right to the antenna, and the back side of the skin is covered by the skin, it's a layer of human decay that will be significantly reduced.
The material is more complex. The stacking of a box of goods, the placement level of plastics, changes the angle of labels relative to antennas. When we do this for a warehouse client, we've seen only 8 of 12 labels on the same tray, and finally, we have a new focus on several of them, which is more than 98%.
Ground-based labels, such as tool positioning and vehicle identification, are installed at 45 degrees of tilt to be less sensitive to the labels and more suitable for people and vehicles to move towards an irregular scene.
Power and sensitivity, not as big as you can.
Many field engineers make a mistake when they debug the first time: they drive the launch power to maximum and high sensitivity. The result is that the identification distance goes up, the error is followed -- the label is read before the person outside the tunnel comes in.
In the field, we typically set portal power to 70–80% of the factory default and sensitivity to the middle of the recommended range. Place a tag at different points in the portal and make repeated passes to check read count and timing, then tune the settings by ±10%. For one-way card entry, slightly lower power is fine. For two-way traffic where direction matters, use a little more power to improve detection accuracy.
The label is dense (more than 30 tabs in one-time approach) and is designed to open the reader's conflict-proof algorithm. Most industrial-level gateways support EPC Gen2 multi-label reading, but field debugging requires a special run of 50 tags that go through the same test and confirm that each one is read without a number.
The logic of people and materials is designed separately, so that no one rules are shared.
The core of the people's access is "identity access", and the core of the material access is "account reconciliation," which differs from one system to another, with different data dimensions of concern, and a logical confusion arising from hard consolidation.
The main point of the person's channel is to determine whether the person has access to this route, to read it or to warn the police. The card reads that people are not matched and the irregularity triggers a connection. The material channel is to WMS or ERP, which is to "should not be out of the library" and to verify SKU, quantities, order status after reading the label.
In factory scenes where people and materials are crossing, such as workshop workers borrow tools to get out of the workshop or send semi-finished products to the next door, it is recommended that different label types be distinguished from different EPC storage prefixes on the system level, that cards be fixed when they are written, and that people's tags and material labels not be mixed. Shanghai-based technology in manufacturing-oriented projects usually recommends that clients clear coding rules at the initialization stage of labels, and reduce later data cleansing.
Data docking and abnormal processing. Don't leave it until you get on the line.
The ultimate value of the walkie-talkie is reflected in the data stream. If you read it as a record of events, it is not significant that the doorbell is used.
On interface protocol, technical Zportal reader generally supports HTTP POST, Modbus, OPC UA, WebService. Recommended HTTP POST+JSON is the most convenient way to develop and monitor secondary events. At least every read event should be returned: tag EPC, timetamp (mixsecond level), antenna number, signal strength. RSSI this value debugging anomaly later is critical and needs to be preserved.
The anomaly is predefined: what happens when you read the label, when you read the unauthorized tag, when the network is broken, when the server returns. Each of these scenes is tested separately, and cannot be replaced by logic until it actually happens.
A few easy-to-neglect details in the daily maintenance.
The RFID channel has a low failure rate per se, but the environment is deteriorating. Several points merit regular inspections:
- Antenna surfaces, if accumulated ash, oily, condensed, can be readable at reduced distance and require monthly wipe.
- The label of the human chest is changed in bulk by a lot of time, on average, from 2 to 3 years because of repeated bends and corrosive sweat.
- The portal solids are recommended for upgrading once a year and the algorithm optimization and loophole repair by the manufacturer is usually published with the solid version.
- If the position of metal objects around the passageway changes (addition of shelf, re-fence of fence), it is necessary to re-engineer the antenna parameters.
The five items were placed on the checklist, each maintenance was followed by a signature and the passway stability could be maintained for more than five years without significant deterioration.
Return to the original sentence: RFID channel is really difficult not to do with equipment selection, but to install and debug the parameters on site. Set your position, get your direction right, move your power to the right range, think ahead of time about the logic of succession, which is all four steps in place, leaving you with a routine maintenance. The list of questions that need to be put into place on the ground or to combo the existing walkie mechanism can be evaluated by looking for an experienced integrated formula.

Ms. Lei
Mr. Pang