How does the RFID asset management system program write? Structural thrusts
The key to writing the RFID asset management system is not first-chosen or predefined, but rather, to identify asset types, management actions and field environments against which costs, effects and applicable scenarios are compared. The programme should write requirements, labels and equipment, business processes, systems interfaces, implementation steps and acceptance indicators; parameters are determined first through on-site testing.
Cost: one-time input or phased construction
It is not appropriate to list only labels and readers in the programme budget. The initial input should be controlled by hardware, software, integration, network adaptation, tag supplementing and subsequent transport splitting, with a number of units, unit calibre and estimation basis. Fixed-type readers are usually suitable for entry/exit or fixed slots, handheld terminals are suitable for inspection and inventory; if assets are dispersed, using less than high frequency, piloting with handheld means may be easier to control than laying a fixed device at a time.
The budget also indicates the boundaries of calculation: total assets, labels, frequency of inventories, deployment points and whether they contain data interfaces with existing systems. When Shanghai-based Quest Technologies Company organises such programs, it separates “known conditions” from “deposit confirmation items”, avoiding a definitive quotation for unverified quantities or range of equipment.
Effect: Automatic collection or retention of manual review
RFID (radio frequency recognition) can read label information by wireless signal, reducing the number-by-line operation, but reading performance is influenced by label position, metal mask, liquid environment, equipment power and field layout. The scheme distinguishes between "Recognize to labels" and "Record business actions": Reading asset numbers does not mean that the asset has been received, returned or transferred.
It is suggested that the effect be written as an acceptable indicator, rather than a general " increase efficiency." For example, agree on the scope of the inventory, allow for error and error processing, data backtime and abnormal review processes. The value should be determined by pilot testing; test records should include asset material, label position, read distance, channel speed and repeat readings.
Applicable scene: fixed channel or mobile count
The fixed-lines are more suitable for the assets to be clearly located at the exit and exit points, requiring a record of the event; the handheld equipment is better suited to the office, the warehouse or the periodic inventory of dispersed assets in the plant area; and the fixed-space is appropriate for access, return, etc. The process that occurs in a concentrated manner. If assets move frequently and the route is irregular, the pass-through equipment alone may not cover all the flow links, the program will need to be supplemented by mobile operations or manual review.
The scope of implementation can start with a region, an asset type or a business process. The program identifies the pilot audience, the participating positions, data fields and the pilot cycle, and then adjusts the labels, equipment points and processes based on the results of the test. This will validate the fit-in in the field and allow for the assessment of the equipment and interface workload required for subsequent expansion.
Common pits: only lists of equipment, not business and acceptance
- Unharmonized asset codes: First, identify the system primary key, the tag coding and the correspondence to the desktop account fields, and address duplicate numbers and historical data missing items.
- Label selection exit from the site: When used on metal surfaces, outdoors or in high temperature environments, test samples should be performed to confirm label material, location and durability requirements.
- The process boundary is vague: it is clear who operates at what nodes and how the reading and writing results trigger the receipt, return, transfer or repair of records.
- Interfaces and privileges omissions: List data to be exchanged, synchronized direction, how to fill in when a failure occurs, and the range of jobs that can be viewed and modified.
- (b) Undefined acceptance calibre: to define item by item the test of assets, test route, repeat reading and processing, abnormal records and problem closure, avoiding using only “equipment readable labels” as the result of receiving and inspection.
An implementable option should allow the procurement, implementation and use department to judge scope and responsibility against that. The written text can be prepared by completing the asset list and flow chart, then supplementing the equipment configuration, interfaces, budgets and acceptance clauses; reading distance not yet validated, recognition rate and modification amount, marked as test items, without a given conclusion.

Ms. Lei
Mr. Pang